Mini-Split Installation For Dummies - Complete Step By Step Guide!!!
Рет қаралды 995,849
4 жыл бұрынKeep it simple! Basic DIY on how to install any mini split including what tools are needed. If you can use a drill, you can do this and save yourself a whole lot of money. Installation is easily half the cost of putting in these systems but YOU CAN DIY! Links for everything used in this video are HERE::
MRCOOL HVAC System: amzn.to/3RDVp7m
Complete kit w/pump and gauges: www.amazon.com/gp/product/B00...
Mini Split Adapter (service port adapter): www.amazon.com/gp/product/B07...
Wall mount for outdoor compressor: www.amazon.com/gp/product/B00...
Nylog Blue Sealant: www.amazon.com/gp/product/B00...
Tubing Flair Kit: www.amazon.com/gp/product/B01...
BRAND SPANKIN' NEW CHANNEL MERCH! teespring.com/stores/trial-n-...
Want MORE monkey business? Find me on Facebook: KZfaqTrial...
Fan mail, business opportunities or inquires:
trialnerrormedia@gmail.com
Trial N' Error
PO Box 349
Candia, NH 03034
IMPORTANT SAFETY INFORMATION, PLEASE READ FULLY: This video is for entertainment purposes only. The content of this video include or may include high voltage wiring, moving parts, suspended weights, risk of fire electrocution and many other hazards. These hazards are capable of serious injury, death or property damage and destruction. Consult a with licensed professional before attempting anything you see in this video. Do not try this at home. As an Amazon Associate I earn from qualifying purchases.
@Trialnerror 18 күн бұрын
MRCOOL HVAC System: amzn.to/3RDVp7m Complete kit w/pump and gauges: www.amazon.com/gp/product/B00SZ4QFW0/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B00SZ4QFW0&linkId=89c4a0bb2075662a32a2d66ed96ff4fa Mini Split Adapter (service port adapter): www.amazon.com/gp/product/B07W9CQ76M/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B07W9CQ76M&linkId=ca52469d7bedc726fa7d4ffc8f092356 Wall mount for outdoor compressor: www.amazon.com/gp/product/B00LDU9R2I/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=trialnerror-20&creative=9325&linkCode=as2&creativeASIN=B00LDU9R2I&linkId=397f284d3c939e6c81efd137b0f2c9ca Nylog Blue Sealant: www.amazon.com/gp/product/B008HOSQQQ/ref=as_li_tl?ie=UTF8&tag=trialnerror-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B008HOSQQQ&linkId=0212c4d8d8a14465fadbd8918ca3e3f2 Tubing Flair Kit: www.amazon.com/gp/product/B01LZB68U1/ref=as_li_tl?ie=UTF8&tag=trialnerror-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B01LZB68U1&linkId=3662399f5c22b114b22ebabb5d7b922d BRAND SPANKIN' NEW CHANNEL MERCH! teespring.com/stores/trial-n-error
@HenrikGronwall Жыл бұрын
Your method of releasing the blue line with only a little pressure makes sense, and something another video did not do. Thanks!
@JP-hu4yx 2 жыл бұрын
This is the cleanest install I’ve seen. No extra hose running loose outside. Helps to mount it on the house to keep it clean.
@ps7436 4 ай бұрын
Can you hear the outdoor unit from inside? (because it is mounted on the wall...) I'm still selecting my mounting method. (BTW - Nicely done video!
@ChironStellar 9 ай бұрын
I really appreciate this video. Especially the bit where you only release enough refrigerant into the lines to remove the vacuum pump line under low positive pressure. Brilliant, thank you!
@markschnittker4770 3 жыл бұрын
Great DYI tips. Backing off and re-tightening the flares. Remove the service line with only partial refrigerant pressure. Simple and intuitive... for the DYI kind of person.
@lktopview 3 жыл бұрын
I did it! Just finished installing an Alpine 18k btu mini split heat pump in my living room wall! Used this video to check each step! Thank you for a great tool for us DIY’s!
@Trialnerror 3 жыл бұрын
Way to go!!! Not many other DIY projects are better than putting one of these in then sitting back and enjoying the cool breeze!!!
@lktopview 3 жыл бұрын
Our electricity coop is going to peak time charging, now I can run my mini split for peak periods and avoid the extra charges I would get by using my whole house heat pump system.
@Hucklebrau 2 жыл бұрын
This is the most comprehensive mini-split video I've seen... and I've watched them all. Most of them leave out too many steps. I'm one of those neurotic DIY'ers that has to watch every video before I tackle an unfamiliar project. I'm ready for this now. Thank you for this one 🤟.
@Trialnerror 2 жыл бұрын
Wow! Thank you very much for the awesome feedback and for watching man, I appreciate it!
@thepoboy9698 Жыл бұрын
I'm with you, I guess that I'm anal like that, lol... But I've got to get it right.
@danielnorman8595 3 жыл бұрын
This is a great video thank you for your knowledge. I have recently purchased a mini split and have it installed all except the refrigerant lines vacuum. I am now waiting on the adapter. All of the videos I have seen about this are by professionals and they don't use the manifold set that came with the evacuation pump. They are using some two to $600 Micron gauge and they all insist on pulling the Schrader valve. Anyway, this lets me know exactly what I need to do and I really appreciate you. Thanks again...
@AceCombat6842 4 жыл бұрын
Awesome video! Just told my wife to get the Mr.Cool! I have the flare tools and vacuum gauges. Thanks for the video! Now off to find my tape measure and hole saw
@Trialnerror 4 жыл бұрын
Awesome! Thank you very much for watching and hope this helped. Good luck with the install. You'll be "chilling" in no time.
@esauhernandez7325 3 жыл бұрын
You made seem so simple thanks! I’m an electrician apprentice and I thought it was going to be harder but so far its looks fun to do.
@Trialnerror 3 жыл бұрын
You're welcome!
@chrislasala 2 жыл бұрын
@@Trialnerror Hi did u use a double 30 amp breaker or 20 amp. Did you just use the 20 amp breaker and oversize the wire for future needs?
@frankleicht5377 3 жыл бұрын
Very nice! Clear, straight forward video. Whoever wired the main service panel is to be commended. The wires are trained straight and orderly from the breakers to the feed pipes. A sign of a pro. Thanks for the video.
@Trialnerror 3 жыл бұрын
That was me and thank you! I have a little OCD when it comes to wiring lol.
@edaguilar7360 2 жыл бұрын
I was confused with the wiring of Indoor and outdoor unit i was working on and this video cleared it. Great video.
@bazperkins 2 жыл бұрын
Great stuff installing one in my mancave in Australia. Really needed the gassing explained well. I'm a licenced electrician but needed help on the charging thanks.
@bwkennard1 3 жыл бұрын
I do commercial AC, and I must say you did a great job.
@Trialnerror 3 жыл бұрын
Thank you very much!
@Blaze_1961 3 жыл бұрын
Nice video on the vacuum test & alternative way to do a small pressure test. Doing it yourself voids the warranty though on most units, so it's a personal choice.
@lisao3041 Жыл бұрын
not on the "DIY" line of Mr Cool. They state on their website installing the "DIY" line yourself does not void their warranty.
@blakeallen213 2 жыл бұрын
Good instructions and overview. I have an HVAC guy do my final connections, but find installing the rest of the unit to be reasonably easy.
@paulsullivanrealestate 3 жыл бұрын
I'm installing 3 next week. Thanks for this great guide. Nicely done!
@Trialnerror 3 жыл бұрын
Thanks Paul. Good luck man!
@stevecorner5069 2 жыл бұрын
One suggestion for wet climates. It would be best to have the refrigerant lines exit the building above the connection points on the condenser to ensure rain water does not travel down the lines into the building.
@Mr51Caveman 4 жыл бұрын
Ok. Sitting here in a cool Sunroom! Just finished installing a Senville 24 K BTU Split system. Probably couldn't have done it without watching your video. Thanks MUCH! I tried a 12K and a 14K Portable floor model AC. Simply could not cool this 450SqFt room. The 14K advertised it would cool (and Heat) a 700 SqFt room. BS!!!! I had to send the 14K back. I've had the 12K so will just keep it or sell it. But as it is rt this moment the 24K is doing the job and it's 94 degrees outside and 78 in here. I had 2 estimates from commercial HVAC companies to install a Split System and they wanted $10000 just to start!!!! Saved myself over 8K doing it myself. Again, Thanks!
@Trialnerror 4 жыл бұрын
Congrats and GREAT JOB getting it done on your own! Letting me know my videos help means the wold to be, for real. Thanks for taking the time to let me know and congrats on the massive savings! Take care brother.
@kolankprof 3 жыл бұрын
You provided the first good recommendation that I've seen on the why and how to deal with excess Line Set length. Thanks!
@Trialnerror 3 жыл бұрын
You're so welcome!
@chucktrotter9699 2 жыл бұрын
8.19.21 Nice video. Liked how was shown using the vacuum pump and cutting the excess tubing. Liked the idea of not rolling up the excess tubing if can not cut and flare. Thanks again.
@dougjones4538 3 жыл бұрын
Forklift. No household is complete without one.
@0529gabriel 2 жыл бұрын
🤣🤣🤣🤣
@tollav 2 жыл бұрын
WhAt?? You don't have forks?? one person can lift it relatively easy but if you have a way to make it easier go for it.
@Ricksdaname 2 жыл бұрын
Thought it came on the box.
@Spagyr 2 жыл бұрын
Every dummy has a forklift.
@drizler Жыл бұрын
Up north……TRACTOR with loader and/ or backhoe
@nightmarecivic 4 жыл бұрын
Very well done guide, I too have seen many other videos coil up the remaining tubing. I decided to take an extra step and have a AC guy come out to shorten my lines and charge the system.
@josediaz-km6kk 4 жыл бұрын
The best aircon installation guide No shortcut. Thumbs up
@karlbassett8485 2 жыл бұрын
Cool video, very informative. I've installed one and it was very helpful to see people going though the same process. One advantage I had is that here in the UK mini splits like this just plug into a standard outlet so we don't have to touch the main panel.
@Trialnerror 2 жыл бұрын
Ahh the benefits of living where mains voltage is a reasonable amount to power most anything. That saves a lot of work!
@karlbassett8485 2 жыл бұрын
@@Trialnerror We need it to power our 3kw electric kettles to make tea....
@gordonkerr91 4 жыл бұрын
Have watched loads of clips on youtube now. This is by far the best explanation I've seen of how to vac test and charge lines using diy equipment.. Thank you very much. Now off to fit mine before the 'heatwave' hits next week in the UK (with a lot more confidence!) SUBSCRIBED
@Trialnerror 4 жыл бұрын
Great to hear!
@dallasokra 4 жыл бұрын
Great video. One tip I suggest is reversing the direction of the hole saw when you are going thru vinyl siding,drill counterclockwise, and have less burring.
@Trialnerror 4 жыл бұрын
Great tip!
@GreatRockRealEstateDenver 3 жыл бұрын
You can do something similar when cutting metal siding or roofing as well. If you are using a skill saw, put the blade in so it spins backwards and it cuts well with no burrs.
@brianc1240 3 жыл бұрын
Nice video and very informative. I just purchased a 24k DuctlessAire and installing this week. This will make it much easier to accomplish. Thanks!
@mj72205 3 жыл бұрын
That sub panel is on point. Thanks for the video. You make me think I can do this. At least better than some other people on you tube.
@Trialnerror 3 жыл бұрын
Really love hearing that. Take your time with it and don't get overwhelmed. One step at a time and it will be done.
@cameronc8847 3 жыл бұрын
Step bit works well for reeming boxes/disconnects for whip
@joshuajillson 4 жыл бұрын
"A proud 5 and a half" I see what you did there. Thumbs up
@mavchampps 7 ай бұрын
You're breaker box is so clean and perfect....I LOVE it!!!
@markbarnes4358 3 жыл бұрын
Best OCD panel I've seen in a while, kinda like ones I've installed, kudos.
@Trialnerror 3 жыл бұрын
Thanks man, I know that feeling. If you're doing it, you may as well do it with pride in your work! Thank you for watching!
@Spongebabe583 4 жыл бұрын
This video made me realize this is way over my head and for that, I thank you.
@Trialnerror 3 жыл бұрын
You can do it!
@peterwouters6523 3 жыл бұрын
Just google and youtube for a week on this subject, and you can.
@xisigma 2 жыл бұрын
Happy as a midget at a mini-skirt convention. Awesome.
@AcousticAnalyst 4 жыл бұрын
A friend asked about my install and how difficult it was. I shared the link to this video with my comment: "I wish this video was available years ago as I struggled to find pertinent tips and information for installing a mini split." Videos I found back then had no voice but only music...left a lot to the imagination and room for error. Another great thing about these systems is the low level of noise while operating. No hearing protection required unless you've got a fan bearing about to fail.
@Trialnerror 4 жыл бұрын
Thank you very much. That means a lot to me to know my videos help people out. Thanks again!
@pfv3462 4 жыл бұрын
This is INDEED THE best video out there for a lot of us....... Thank you verry much!!!!!!
@Trialnerror 4 жыл бұрын
Glad it was helpful!
@dutchd5091 4 жыл бұрын
Subscribed based on the "this is the best youtube channel, I ever made" comment and various AVE references. Great work on the mini split, I guess. HA!
@Trialnerror 4 жыл бұрын
Thanks and welcome! AVE's lingo just sneaks into your speech if you watch him enough doesn't he?
@dutchd5091 4 жыл бұрын
@@Trialnerror He is pretty sckookum indeed. Your AC project was not hoopa jupped at all.
@johndooley8837 Жыл бұрын
Thanks for the video. What did you do with the condensation drain line? Water runs out of it in A/C mode. It's a good idea for your pipes to be angled downward toward the outside, same idea as a drip loop. Rain on the lines will eventually enter the building if positioned your way. Regarding coiling the lines, the refrigerant and oil are said to have miscibility. Defined as follows - "Miscibility is the property of two substances to mix in all proportions (that is, to fully dissolve in each other at any concentration), forming a homogeneous mixture (a solution). The term is most often applied to liquids but also applies to solids and gases." I have seen many coiled systems running for years, 10 years for my own systems, with no issues. A coiled line also helps to reduce vibration and noise from travelling from the compressor to the inside of the building. Regarding the electrical wire from the compressor to the inside uiit, viewers need to know that your routing will not work for most installations. The "cab tire wire" connecting from the compressor to the inside unit is bundled with the refrigerant lines in order to get to where it needs to go. I would suggest that people watch other installation videos in addition to this one before starting the install.
@quadtraxxx 3 жыл бұрын
Best self install video I’ve seen! Hats off to you sir! 👍👌
@Trialnerror 3 жыл бұрын
Wow, thanks!
@toddhaines4733 3 жыл бұрын
Thank you for the straight forward info. Appreciate it. And my OCD is very pleased as well🤣😎
@jdubya54 4 жыл бұрын
excellent video. by the way use a regular torque wrench with a claw type open end wrench to torque
@luiscervantes390 4 жыл бұрын
Good job , keep in mind that it is ideal to have a micron gauge when your vacuuming a system to ensure that you do not leave any moisture as it can cause problems. Also it’s probably better if you can pressure test your flares/ connections by inserting nitrogen in the system as this will allow you to have higher pressure in the piping which can lead to finding leaks that can only be seen with higher pressures.
@bridges5659 4 жыл бұрын
Just use diluted soap suds or ordinary dish washing liquid around the flared connectors and it will show bubbles around the joint if there are any leaks.. The most effective way is to inject dye oil and use an ultraviolet light to detect leaks but it's time consuming and the dye oil does some damage to the system. 👍
@doddgarger6806 4 жыл бұрын
I just let mine sit under vacuum 2 hours, didn't budge an inch Then you can run the system and leak test with soapy water so the lines are under about 400 psi, have to do this in heat and AC modes as the suction line obviously swaps and alternates which line is under the greatest pressure
@DayClanTribe 4 жыл бұрын
@@doddgarger6806 410a is more critical than others and it's very important for system longevity that proper procedures are followed to 410a standards. That included pulling down to a MINIMUM 500 microns and holding. There is no other way to observe this without a micron gauge.
@TheCowboysdude 4 жыл бұрын
WOW HUGE Thank you!!! This is THE best video out there for a lot of different reasons....... Thank you!!!!!!
@Trialnerror 4 жыл бұрын
LOL, thanks John. I appreciate that and I hope I got you to subscribe.
@TheCowboysdude 4 жыл бұрын
@@Trialnerror You did lol.
@rotce07 3 жыл бұрын
Thank you for this video. I followed your instructions and all worked well. I would not have had the guts to try doing it my self without your detailed explanation .
@thomasdalfonso4657 4 жыл бұрын
can i install one of these units on my home which has the 40 year old a/c unit installed in the attic now to replace that one to maybe be able to provide cooling to two seperate bedrooms with one unit to be able to get rid of the attic unit? would make it alot easier for me than getting a new unit up in the attic and complete the install.
@mrmotofy 4 жыл бұрын
Yes but you likely want a multi head unit. 1 head unit per room
@bobakleh1397 3 жыл бұрын
When you pull a vacuum you need to check the microns to ensure vacuum is pulled enough. if not, air will be in the system and cause damage to compressor mainly and lose efficiency. second thing, when you check pressure, a vacuum test is good, but you need a micron gauge to really see what the number is, using manifold gauges doesnt really show you much change unless you have a major leak. Other way to check is with nitrogen, most minisplits use 500psi as a test and let it sit for however long manufacture recommends. Another thing, the reason why people coil up the coil is because some minisplits come with linesets that are precharged with refrigerant so you can't just cut open the line or else you need a tech to come out and fix your booboo and recharge/reweigh in the charge.
@johnerway7255 2 жыл бұрын
Thanks for the basic overview. Very helpful and you made it easy to understand and follow.
@Trialnerror 2 жыл бұрын
Thank you very much for the feedback and for watching!
@violetsky2225 4 күн бұрын
thank you for doing this install vid. I am a visual learner and this helped me to make my selection for the minisplit.
@carsutube 3 жыл бұрын
Trial N’ ERROR thanks for this video. A few things I wondered are. How did you get a unit that did not come pre loaded with refrigerant? Did you remove it? Also if I got one that’s what I for sure would have wanted to do so there is no coil left sitting around. Is the pre pressured refrigerant that they put in the unit in the out door unit or in the lines they provide. Assuming their closed pre filled refrigerant systems are done by the company. Again how did you get one where you could fill it yourself? Also when you cut the pipe on the inside. How did you flare the ends of your pipe since we didn’t see how you did that? Lastly when you let the nitrogen out of the lines that come out of the indoor unit. Is that nitrogen just in those short pipes for shipping purposes? It was hard to see what you were removing slowly to release the nitrogen. Thanks. Love how clean your work was. Not OCD to me at all. Well done. I hope I can do what you did when I install one
@BorisFett 4 жыл бұрын
"The best KZfaq channel I've ever made" Exactly
@georgewest3999 3 жыл бұрын
Thanks for making a great video. Your craftsmanship is top notch. I was really impressed with the electrical sub panel box...OCD. I might need a little touch of that if it makes things look like that.
@Trialnerror 3 жыл бұрын
Ha/Thank you! I've since added more circuits so now it really looks OCD lol. Thank you for watching George!
@jackdeangelis6585 3 жыл бұрын
Lots of good tips but the one about not coiling the supply lines is great. Also, I was about to buy an open end torque wrench, I might skip that now saving $150. Thanks. Subscribed.
@bryanmcclintock1232 3 жыл бұрын
How did you install the drain lines? I am going to install all of my lines in the framing and I can't have them slope down continuessly. Do I have to use some kind of a pump? The system is already loaded with the coolant. Does that include the lines?
@cluginbill 2 жыл бұрын
I have two units like this installed in my server room, and the pro installers did run both drain lines to a pump. Once the pump is full, it pumps the water to a drain pipe. I suppose you could also let it drain outdoors somehow? This is the pump they used: smile.amazon.com/Superior-Pump-97154-Condensate-Black/dp/B08GH5WF99/ref=sr_1_15?crid=1T2VDNCCE464F&dchild=1&keywords=drain+pump+with+float+switch+tank&qid=1629680216&sprefix=drain+pump+with+float+%2Caps%2C207&sr=8-15
@4961Studebaker 4 жыл бұрын
Nice install. Your only one I’ve found so far that installed the lines between the studs. To keep the inside unit flush to the walls were those lines easy to bend or did you have to notch a relief or drill some holes.
@Trialnerror 3 жыл бұрын
They are easy to bend but also easy to crease so you have to be very careful. They cannot handle anything tighter than say the circumference of a 1 gallon paint can if that makes sense. Just bend them slowly and really watch the lines as you're doing it. If it starts to crease you want to be able to stop before it's too late. GOOD LUCK man!
@jenova49 3 жыл бұрын
@@Trialnerror I was thinking of getting a kit like this: www.amazon.com/gp/product/B08SFZP9W2/ref=ewc_pr_img_1?smid=A3DLN7K1UTIF0F&psc=1 but it sounds like these pipes might not be able to bend that much. Would this be too much on the 1/2 and 1/4 pipes (I have 18k and 9K indoor)
@cyrex7223 4 жыл бұрын
Very nice job, you do not have OCD on the electrical panel...you have pride in your work
@Trialnerror 4 жыл бұрын
Thanks man, really appreciate that!
@buggsy5 4 жыл бұрын
I agree. That is how a competent and conscientious electrician wires a panel.
@530steve 3 жыл бұрын
first video I've seen with the lines in between the studs. I like that idea. Did you end up putting insulation over the lines? What about condensation on the lines? Is that a potential issue? I really like that idea. I have a small she-shed and am planning on installing a small unit. Wife is particular about looks and having the lines inside is very appealing to me. Thanks for the video. Also I don't see where your drain comes out?
@w1swh1 2 жыл бұрын
Yes I am doing the same. Those big cover drain pipes are awful. Just concerned I may not able to bend lines enough to do that.
@doddgarger6806 4 жыл бұрын
Crows feet with a tq wrench work great, but the bigger one is like a 7/8 or 15/16 so need to be a big set, smaller one is 16mm maybe
@coldspring22 Жыл бұрын
Great video! Best details about vacuuming line set among all the DIY mini split videos I've seen. Although you say it's simple, I've seen other youtuber DIY mini-split install get into major pitfalls - such as kinking the line set by bending it too sharply, or not actually vacuuming the line set before releasing freon by forgetting the shraeder valve insert. So it's possible to get into serious trouble if you are not careful with DIY mini split installs.
@lisao3041 Жыл бұрын
in all fairness, the Mr Cool line is made as a plug 'n play with NO vacuuming required.
@HAVILA65 4 жыл бұрын
I loved your video it was very informational, and you do neat and clean work, thanks for the upload.
@Trialnerror 4 жыл бұрын
Glad it was helpful!
@tylerhoffman9221 4 жыл бұрын
Maybe I missed it no drain line needed? Did you run a nitrogen pressure test through the system?
@msboys1000 3 жыл бұрын
Bro lost me wit the “that’s what she said”😂😂
@paulhancock7860 4 күн бұрын
Excellent video with valuable info left out of many other DIY mini-split videos!
@Zak_H 3 жыл бұрын
This seems really simple. I am looking at getting a 5 cassette unit soon for my trailer house.
@bupright 4 жыл бұрын
This is the very best installation video I have seen. I have a question though...you ran the control cable in the same conduit as the main power. Mr. Cool told me this would cause interference and create problems. Did this happen to you? Also, do you know if there is a minimum line length when you shorten the lines? Thank you!
@bupright 4 жыл бұрын
@@Trialnerror I think I've watched just about every video for the various "models" that are made by Midea (Pioneer, Mr. Cool, Senville). You were the only person who ran the lines together in the same flexible conduit, and I think that is by far the best way. 98% of the installations on KZfaq just have the rubber control cable exposed -- or running across the ground -- packing 240 volts! My line set is sixteen feet and I plan to cut off about five feet, so hopefully that will be OK. Just as an aside for anyone else watching this video: My Mr. Cool came with a chintzy 2.5" wall sleeve, constructed of the thinnest, cheapest, most ridiculous plastic. I could see that it would cause problems, so I cut a hole with a 3.5" hole saw, and inserted a piece of 3" PVC for a sleeve. (3" PVC OD is 3.5", ID is 3"). The extra half inch made a world of difference.
@buggsy5 4 жыл бұрын
@@bupright I believe the electrical code prohibits running low voltage control cables in the same conduit as power cables.
@kenmarriott5772 4 жыл бұрын
Buggsy5, the control wires need to be 600V rated to be run in the raceway with the power wires. Also the unit may not have been UL tested for this installation.
@Trialnerror 4 жыл бұрын
@@buggsy5 They are not low voltage, the outdoor unit provides 240v to the indoor unit through this 600v rated cable. That said, I believe they are still technically suppose to be in separate conduit but I like to live dangerously lol.
@NickelCityPixels 4 жыл бұрын
You sir, have underestimated my dumbness.
@brandonspage1334 3 жыл бұрын
Great video. Nicely done. Easy to follow. I'll let you know how my install goes next week.
@Trialnerror 3 жыл бұрын
Good luck Brandon! Please do let me know how it goes.
@md929 3 жыл бұрын
I do AC and you gave me ideas. Great job and looks clean.
@Trialnerror 3 жыл бұрын
Awesome! Thanks very much for watching!
@oldkid6 4 жыл бұрын
This looks so simple I'm going to ask my mom tu do it.
@robertbutler8004 4 жыл бұрын
oldkid6 do you have an insurance policy on your mom?
@mdynova4809 4 жыл бұрын
Great video, but you forgot to show what you did with the drain line and how you ran it. along with insulation of the lines outside.
@Trialnerror 4 жыл бұрын
Yea, I muffed that up. I just ran it down and out of the same hole the lines run through. Sorry I didn't show it on camera but just keep gravity in mind and you'll have no issues. Thank you very much for watching!
@cabbys 4 жыл бұрын
Excellent video. Clicked all the links, thumbs up and sub 'd. First time on your channel. Like the way you cleaned it all up and great explanations.
@Trialnerror 4 жыл бұрын
Welcome aboard! Thank you so much man!
@RobertJoeBryantHVAC 4 жыл бұрын
Great video and detailed explanation. Yep, those compressors are heavy puppies!
@Trialnerror 4 жыл бұрын
Yea they are! Thanks for watching and commenting man, I appreciate it!
@chipjumper 4 жыл бұрын
A lot of these precharged units need at least 10' of refrigerant tubing.
@r.a.williamsakablackmullet8325 3 жыл бұрын
15ft
@rickmarchand5033 4 жыл бұрын
What about your super heat for efficiency. Factory charges are inherently low due to temperature differences.
@axl1057 4 жыл бұрын
Can you further explain what to do with this ?
@pistolshoy87 4 жыл бұрын
Ax L where the units are made and prechaged for the consumer the refrigerant most time is under charged due to a temperature change from where they are built so you have to convert the pressure on the high side of the system (the reds hose/gauge) to temperature using a P/T chart and take a temperature from the out let of the condenser subtract those 2 numbers and that will give you a superheat the super heat should be between 5 and 20 obviously you want to aim more for the middle of those 2 numbers but this can determine if your unit is undercharged or not
@Trialnerror 4 жыл бұрын
@@pistolshoy87 GREAT info Marc. Thanks for adding it, I'm sure that will help a lot of people thumbing through the comments!
@coreymadden3650 3 жыл бұрын
Thank god a fellow tech watched this
@willrey6224 3 жыл бұрын
Great job champion for taking your time and give us this wonderful tutorial knowing that you're not an expert..BLESSINGS brother and good job😀😀💯💯👏👏
@Trialnerror 3 жыл бұрын
You are very welcome!!!
@jeffmartin909 2 жыл бұрын
Nice Video of mini split install. This helped me answer some questions about the install as I recently purchased a mini split. Nice detail and clarity with the video. Good job!
@Trialnerror 2 жыл бұрын
Glad I could help. Thank you very much for watching and for the feedback.
@ronnyrath816 4 жыл бұрын
Warning this is for DIY homeowners only.
@gregrichard9192 4 жыл бұрын
Was about to watch this video but then realized it was for dummies
@Infidel67 10 ай бұрын
Cleanest setup I've seen on here. Congrats.
@donmace4501 3 жыл бұрын
Great thorough explanation and well produced! Followed everything to a T but forgot to order the brass fitting adapter. Ughh! Oh well couple more days to cool!
@Trialnerror 3 жыл бұрын
Oh man, that's a tease! Well, congrats anyway!!!! You'll be enjoying it soon enough.
@nedjinski 3 жыл бұрын
Love this video! You are so meticulous and thorough. I have a question about the lines. You cut yours to exact length. Most of the MrCool heat pumps sold now have a specific length set (25ft) that is pre charged. For my upcoming install I need about 8/10 feet max which is much less than the pre charged set. I like the idea of a pre charged set but to take advantage of it you have to go with the length supplied in the kit and then, like in my case, I would have to accept quite a bit of coiling which you say is not a good idea. So would you recommend to get the pre charged set and make it work somehow or go with cutting it to length? There would obviously be some coolant spill and I would have to charge the system the way you did.
@Cyberbronco 3 жыл бұрын
Nedjnski I’d like to see someone more qualified answer your question. I am in Florida. I’m installing an 18,000 BTU unit for my garage. I’m going to have my extra line coiled up outside next to the unit. As long as the coils are large and there are no sudden bends or kinks I would worried about oil pooling. If you are getting the DIY by Mr Cool then cutting the pipe defeats the purpose and the cost savings. If you want it to look prettier without the extra coiling then you want the regular non-DIY like he is installing here. With the money you save you can buy the tools or call an AC tech to make the connections and vacuum the lines for you. Hope this helps.
@luisrodriguez4308 3 жыл бұрын
@nedjinski this would not be possible for the “DIY Models” knowingly cutting into one of these pre-filled refrigerant lines is illegal. Please call a certified and licensed person to make alterations as the refrigerant must be handled properly by a competent person.
@bugayd3695 2 жыл бұрын
@@luisrodriguez4308 The compressor is charged with refrigerant, not the lines. (lines may be pressurized with nitrogen). After the lines are evacuated, you release the refrigerant INTO the lines by opening the service valve).
@stophate2023 4 жыл бұрын
Just the tip!
@Trialnerror 4 жыл бұрын
lol
@chodickson 3 жыл бұрын
Great explanation. Especially discussing and showing the pressure changes in the gauges when you start to add the refrigerant to the system. Many other videos miss or don't talk about it.
@boogiebambam1 3 жыл бұрын
This guy is great! even a little humor. great vid!
@Trialnerror 3 жыл бұрын
Glad you enjoyed!
@r5LgxTbQ 3 жыл бұрын
I have trouble putting in the window units, guess I'm not DIYing this 😂
@hzuiel 3 жыл бұрын
They make an actual DIY system that is designed to be easier to install and has the full manufacturer warranty even when not installed by a professional. That is what i am looking at buying right now.
@jkepps 4 жыл бұрын
Great video! My only concern was when you were working on that sub-panel (which I assume was energized) with your necklace/chain on. Other than that, Pure Awesome Sauce!
@Trialnerror 4 жыл бұрын
Danger is my middle name (or dumb...hard to tell most days). Thanks for watching Jorden!
@peterking1134 4 жыл бұрын
As a general rule, leave all metal jewelry & watches at home. This addresses electrical and mechanical (fingers crushed by rings) safety.
@axeljehovanymendoza 3 жыл бұрын
This is very easy because you can see all the potential things that could go wrong. If this was a finished house with drywall and everything else it’s a little bit more complicated because you don’t really know the variables. Also no stucco and metal mesh to get through. Stucco would make this job take a lot longer because of all the anchoring and such for the line set and exterior electrical runs. In theory if the conditions are like yours it’s easy if not get ready for a lot more work.Still a great job and super clean.
@Trialnerror 3 жыл бұрын
You're 100% correct. In terms of doing this as a tutorial I thought my setup was perfect because we can see everything but you're right, add time based on your wall situation. Thanks for watching/commenting brother!
@MyLeafy1 4 жыл бұрын
nice job, mr cool like mr slim. good luck down the road. i would recommend a surge protector at the main. i have changed boards out on the condenser from incoming power spikes. those boards are not cheep.
@Trialnerror 4 жыл бұрын
Thanks and yes, I have a surge protector on the main panel. I have way too many electronic toys to risk it!
@chuckmunch3627 4 жыл бұрын
LMAO! Had to get myself together after the tRex
@devajonesdiy 4 жыл бұрын
you and me both
@clw1935 4 жыл бұрын
Thought I was the only one who does electrical work in the nude haha!
@Trialnerror 4 жыл бұрын
It was hot as balls! Hence the need for AC!
@erronellington8800 4 жыл бұрын
Best for sure dude. This is much much appreciated!!
@Trialnerror 4 жыл бұрын
No problem 👍 Thank you for watching!
@MR-ri1qp 3 жыл бұрын
Solid video. Sure wished I would've found your video before I installed mine. I was stressing out that the colors didn't match on the indoor unit or the outdoor one. My OCD caused me to overthink things and my wife just said "what does it matter the color as long as 1 to 1, 2 to 2, and 3 to 3?".
@josephbohme7917 2 жыл бұрын
An electrican gets in the habit of wearing 'electical resistant' gloves and keeps his hands off the steel shaft of a screwdriver.
@Trialnerror 2 жыл бұрын
Good thing I'm no electrician ;)
@devajonesdiy 4 жыл бұрын
19:37 that underarm hair was really turning me on
@enzosso 2 жыл бұрын
Excellent video. Thank you for the detailed explanations.
@petemiller519 4 жыл бұрын
Good video. No vapour barrier in the garage even though it's insulated.......BUSTED Ha Ha. Cheers from Canada.
@josueluna9942 4 жыл бұрын
Young man never work without a shirt or wearing a chain on your neck 🧐
@morningsuit01844 4 жыл бұрын
Why not? He was hot, in more than one way!
@rydfree 4 жыл бұрын
He did have a chain around his neck so he had that part covered .
@barrydiabo1371 4 жыл бұрын
HAHA..."that's what she said"
@mssburr 4 жыл бұрын
Proud 5 1/2 lol
@jeffstieren4474 11 ай бұрын
Great information. “Best KZfaq channel I ever made” Good one.
@adirondackcarfoundry368 4 жыл бұрын
Thanks. This really helped me with my install. Just enough detail to be useful.
@Trialnerror 4 жыл бұрын
Thanks Chris, I appreciate you taking the time to let me know it helped. Enjoy not sweating your ass off :)
Tony's Tractor Adventure Homestead
Рет қаралды 8 М.
Jon Hughes
Рет қаралды 71 М.
Everyday Home Repairs
Рет қаралды 314 М.
Crafted Workshop
Рет қаралды 597 М.
Benjamin Sahlstrom
Рет қаралды 129 М.
Mostakim 1.0
Рет қаралды 24 МЛН