No video
Mini-Truck (SE03 EP11) Redneck dump truck conversion, Mini gets a dumper (used parts)
Рет қаралды 56,450
Күн бұрынMini finally getting her custom dump bed conversion! Electric over hydraulic with mostly used parts Jeffro gave me and scrap metals, the redneck way! I did get some cutoffs at Dutchess metal and some hardware from Davies Hardware. Twerk it mini!
the hydraulic cylinder is 1 3/4" rod, 44" 1" bolt hole to bolt hole extended, 26" hole to hole collapsed. Cylinder is 24"x 3 1/4
I am a self taught welder, not a professional. Just do as a hobby. I have an Everlast welder, Thermal dynamics plasma, set of gast torches, Milwaukee battery tools, band saw etc to accomplish most anything I want to in my garage.
Get your keyfob, stickers and more at www.motocheez.com
Part links for the minitrucks:
www.motocheez....
www.motocheez....
Get your keyfob, Merch at www.motocheez.com/merchandise
MiniTruck playlist goo.gl/EztFd8
_____________________________________________________________________
Some Recorded with my Samsung galaxy S10
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock.
Researching online I did find l lot of new information, but Amir explains a LOT more than I knew, he has been in the business for 15 years. Plus if Bubbles in Trailer Park Boys has one, it HAS to be cool!
Don't forget you're buying a used vehicle, check it all out, they're over 25 years old! Some are in much better shape than others. Check for leaks, CV boots ripped, Loose suspension, Clutch slippage, clunks etc. Just like any used vehicle
S83p specs:
660cc 6 vavle 3 cyl engine 48-53hp carburated
weight: 1500 lbs
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I know there may be other videos of this.. but this is my Cheezy style!
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Custom intro music and Voiceovers by Harp C Chord, Ryan Harper.
Memes etc: Yes
Music clips: KZfaq free music
Movie clips: Earl Shieb, The office, bugs bunny, robocop
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
@MotoCheez 3 жыл бұрын
Part links for the minitrucks: www.motocheez.com/hijet-mini-truck www.motocheez.com/suzuki-carry-dd51 Get your keyfob, Merch at www.motocheez.com/merchandise MiniTruck playlist goo.gl/EztFd8
@TitanXBowls 3 жыл бұрын
Combine Dumpy and Mini. What’s up Mini dumpy
@brandonboulton2776 4 жыл бұрын
Nice welds bud. Seriously not terrible. I'll be converting my 88 Suzuki Carry DB71T to dump this summer. And next winter I'm plopping in an Arctic Cat T660 engine in. It's actually the newest version of the Suzuki F6A.😁 120hp out of the gate. Bolts right in.
@MotoCheez 4 жыл бұрын
Thanks! Sweet, So that engine will bolt right up?
@brandonboulton2776 4 жыл бұрын
@@MotoCheez shhh. It's only you me and one sledhead who knows.😁😜
@brandonboulton2776 4 жыл бұрын
@@MotoCheez enjoy that rabbit hole. Some sledheads are pushing this engine to 180hp reliably.😁😁😁😁🙊🙊🙊
@MotoCheez 4 жыл бұрын
@@brandonboulton2776 wow! I was thinking about a rotary because these need the RPMs or you'll have to regear
@MotoCheez 4 жыл бұрын
Just subbed to you
@projectrice550 4 жыл бұрын
2020 is your year Mr. Cheese!! Your going to blow up mark my words!! Great, information, funny, and entertaining as always.
@MotoCheez 4 жыл бұрын
😁💯🔥 that'd be awesome. Love making the videos
@waynecipriano7698 4 жыл бұрын
Indeed very informative
@projectrice550 4 жыл бұрын
Seriously I watch to learn gotta couple vids saved to look back on when I get my very own mini and 2 wheels. But then I’m laughing and getting everything you throw, guess cuz I’m an late 80’s 90’s kid, thanks 🙏 for the reply!
@dalerobertson9394 4 жыл бұрын
Minis a dumper. Awesome work.
@MotoCheez 4 жыл бұрын
Thanks
@Z-Bart 4 жыл бұрын
Dumpy would have been so in love.
@MotoCheez 4 жыл бұрын
He's gonna be jealous for sure!
@mr.m2556 4 жыл бұрын
Mini is going to need some bed lights now...better throw one under the deck to light her engine. She looks great!
@MotoCheez 4 жыл бұрын
Thanks!
@jamesbockenstette4332 4 жыл бұрын
Mini is being modified. Meep meep. She is gonna go to work. No more sitting around.
@MotoCheez 4 жыл бұрын
Hell yeah!
@jamesthornton4164 4 жыл бұрын
Nice job on fabrication
@MotoCheez 4 жыл бұрын
Thanks!😁😁
@warrenw.1544 4 жыл бұрын
A job DONE RIGHT!!! Well done.
@MotoCheez 4 жыл бұрын
Ty 😁
@danielfisch655 4 жыл бұрын
Woohoo, Mini is now "Mini Dumpy" or as our oldest daughter said " Mini took a dump", lol. Great job, brother and thanks for sharing.
@MotoCheez 4 жыл бұрын
😁 that put a smile on minis face
@danielfisch655 4 жыл бұрын
MotoCheez 👍🏽👊🏽
@glenbaker5311 4 жыл бұрын
Nice job,, now you can use her to go get the cutting torch filled,, Thxs for posting,, gb
@MotoCheez 4 жыл бұрын
Yes! On my way today!
@19hotspots 4 жыл бұрын
Dam your good! Love the knowledge a little american can do. Nice 🇺🇸👍👍
@MotoCheez 4 жыл бұрын
Thanks!!👍
@DustyakaDD 3 жыл бұрын
Love the mini truck, project is coming along nicely. Also love your friends Autocar. Very nice rig.
@Liberty4Ever 2 жыл бұрын
It takes a special kinda crazy to sell Dumpy and then convert Mini to a dumper. :-) 2:00 - How are you able to freehand cut a line that straight with a reciprocating saw? R U a robot?!? 3:30 - I love how you take a look at the job to get a general idea, then design the specifics at your local metal store to use their $1 per pound scrap metal drops. 16:20 - Awesome job retaining the drop sides on the dump bed. With all of the LED lighting, winch, etc., you have one of the most tricked out and functional kei trucks in the world.
@MotoCheez 2 жыл бұрын
I got a good price for dumpy, I used mostly scraps from jeffro and bought the larger steel for the ram from the cutoff bin, was cheap. The reciprocating saw cuts a pretty straight line, been doing it for years Thanks, I love fabricating
@oby-1607 2 жыл бұрын
Pretty dam good job. Would love to get one of those mini trucks. The $49 paint job commercial cracked me up.
@thomascheatham3519 4 жыл бұрын
Great video man you crack me up thanks for keeping it real.
@nickt9968 4 жыл бұрын
Nice job man. I did the exact same thing on my truck last summer. I did not have to cut the rear lip part where the light mounts. With the lights removed there was enough clearance to allow the bed to pivot. I plan to use thinner LED lights. I also installed the dump cylinder facing the other way, it pushes toward the cab. If you build a head ache rack, I suggest you install it on the dump bed itself. If you want to dump a load of branches or other crap, it wont fall between the bed and the truck when you dump. Keep it up , your video are always entertaining!!!!
@MotoCheez 4 жыл бұрын
Thanks! My hitch got in the way of the tail lights. Was going to mount the cylinder like yours (stock) but couldn't find the right pivot point. I'm leaving the rack on the cab because I'm mounting a winch to it so I can tilt the bed a bit and pull tractors, quads, logs etc on the bed. The rack does not have enough strength on the bed for a winch.
@MotoCheez 4 жыл бұрын
Send me some photos of your rig thru instagram
@nickt9968 4 жыл бұрын
@@MotoCheez Allright opened an instagram account just for you. Added a few pictures and a video of the bed in action. Account name is saitch0
@MotoCheez 4 жыл бұрын
@@nickt9968 you sent them to motocheez? I don't see them
@nickt9968 4 жыл бұрын
@@MotoCheez I posted them on my account. I will educate myself more about Instagram tonite and will post a picture on your page.
@mikeeger7581 4 жыл бұрын
Yeah way better 🙏👍💪✌️👌awesome that you know how to weld so well!
@MotoCheez 4 жыл бұрын
Thanks😁
@goofyleo3869 4 жыл бұрын
1st....but Dumpy will live in our hearts, forever.....
@MotoCheez 4 жыл бұрын
3rd!
@poweron1807 4 жыл бұрын
Ahhhhhh My Mini time my day is complete
@aserta 4 жыл бұрын
With plasma, one trick for cutting above your weight class, is to angle the cutter head along the path then scoop it up, backwards. Kinda hard to describe, but the idea is to "shovel" out the metal, it's slow as frigg and you'll never get a nice edge, but i've managed to cut quite a biggun piece with that trick.
@MotoCheez 4 жыл бұрын
I'll give it a try next time. Thanks for the tip!👍
@ryankc9oza118 4 жыл бұрын
In my best Borat impression. A very nice
@MotoCheez 4 жыл бұрын
😁👍👍👍🤜🤛
@christopherbishop4927 4 жыл бұрын
👍WUMT, I love your new box Mini
@TreyCook21 4 жыл бұрын
Sex change? Nah, weld on accessory. Thanks for covering her box, too. And, in all seriousness, that looks really well done!
@MotoCheez 4 жыл бұрын
Haha. Yes!
@menunknown6502 4 жыл бұрын
I saw for the first time someone who converted a truck into a dump by myself. As expected, it's DIY country, America！ From Japan 日本
@MotoCheez 4 жыл бұрын
😁👍👍
@bruceaplin 4 жыл бұрын
A very nice conversion/mod. You got me on the last sentence. Here I was about to make a trip from Florida to your place. Now, like you said "I'm not gonna do it" ha ha
@MotoCheez 4 жыл бұрын
Hahhahahah
@deechuisano3494 4 жыл бұрын
wow, unbelievable what you can do!!!!!!!!!!!!!
@sericcreativeworks1865 4 жыл бұрын
Turning into one of the sickest minitrucks on the road! I'm definitely going to do a dump conversion on mine now!
@MotoCheez 4 жыл бұрын
Thanks! Totally worth it for sure
@sericcreativeworks1865 4 жыл бұрын
Heck yeah buddy, keep up the good vids!
@dragonslayer19695 4 жыл бұрын
Looking real good, Don't forget to make a safety kickstand for when you are working under there.
@MotoCheez 4 жыл бұрын
Def will. Have a dowel for now
@waynecipriano7698 4 жыл бұрын
Very creative outstanding job i bet u it was tedious .🎸on man
@MotoCheez 4 жыл бұрын
Ty!
@waynecipriano7698 4 жыл бұрын
@@MotoCheez thanks for that my friend
@markrjones 4 жыл бұрын
Wow! That turned out nice.
@MotoCheez 4 жыл бұрын
Thanks!
@haroldpatton01 4 жыл бұрын
Nice job!
@MotoCheez 4 жыл бұрын
Thanks!
@haroldpatton01 4 жыл бұрын
Your Welcome!!
@casonbaumgartner8189 4 жыл бұрын
That auto car is sick. A construction legend👍
@MotoCheez 4 жыл бұрын
It sure is!
@thatsmydawg 2 жыл бұрын
Love your videos dude! Going to visit amir tomorrow morning. Ill have to start videoing my stuff. When i get a mini
@MotoCheez 2 жыл бұрын
Sweet! Thanks
@aserta 4 жыл бұрын
Good mod. Certainly, you've raised your stats on, when you have to clean her up.
@mikeeger7581 4 жыл бұрын
Yeah paint and rust converter where needed??!!!! Thanks 🙏 Mike
@michaelehrlich1952 4 жыл бұрын
Good job, mini looks proud ! :)
@MotoCheez 4 жыл бұрын
🤣😂👍👍
@ywr969 4 жыл бұрын
very impressive fab skills. great job!
@MotoCheez 4 жыл бұрын
Thanks!
@randyrejer4219 4 жыл бұрын
Those two welds were the best you’ve done.
@geraldrichardson7252 4 жыл бұрын
Another great video cheez!
@dan-dan-da-treeman 3 жыл бұрын
I'm totally enjoying your vids. High five!
@MotoCheez 3 жыл бұрын
Thanks!😁
@strokenumber3 4 жыл бұрын
Is there anything you can't make? That's some home engineering
@MotoCheez 4 жыл бұрын
TY😁
@squirts250r 4 жыл бұрын
Awesome video!!
@MotoCheez 4 жыл бұрын
Thanks!!
@michaelgemmer2806 4 жыл бұрын
Mini’s like Marilyn on the sidewalk vent! 👀🥰😛😍
@MotoCheez 4 жыл бұрын
Haha
@nickmarangos2475 3 жыл бұрын
This is sick man im definitely doing this to mine ! Thank for the awesome video 👍
@katana258 4 жыл бұрын
google map it and found just near the overlook drive in , between 44 and 55 .. spent many a weekend night with the wife and kids in the 1970's there .. packed in a 1965 ford eco line van .. that's all we could afford for fun .. bring food and drink , lawn chairs .. bed in van when kids would fall out ..was the summer best , park in the back , with the other crazys .. bug coil going , something to toke , crap drive in speakers hung on the glass ..good times .. funny I would paint with a brush all my old trucks on the out side with a brush with DERUSTO PAINT HIGH GLOSS ... con all the kids in neighborhood to come and paint , pkg of the cheapest brushes I could find .
@MotoCheez 4 жыл бұрын
Haha. Nice! I've been to overlook drive-in dozens of times! I used to go at least once a year
@AAAOSD 4 жыл бұрын
Wow good job 👍🏼
@MotoCheez 4 жыл бұрын
TY
@RatdogDRB 4 жыл бұрын
Do you have a gap across the back now (where you cut across)? If so, a nice place for an LED light bar and some additional tail/brake/turn lights too. No shortage of good ground there now. LOL On the cut line, might be able to use some of that door edge guard trim stock, give it a smooth/rounded edge? Is there room for one more cross brace on the lift rails, at the front of the bed... for a bit more rigidity to keep it from swaying laterally while a dumped load may shift? A guy could get a little crazy with a roller and a gallon (or three) or that Harbor Freight rubberized bed coating after a good pressure washing/degreasing (top/bottom). Lookin' good !
@MotoCheez 4 жыл бұрын
I was messing with a rubber strip where the Gap is, when it's lifted it closes off pretty tight, like 1/4". The cross brace can only be flat so I'm not sure it would rigid it any more than the bolts... Maybe. I have to look up the harbor freight stuff. Any good?
@RatdogDRB 4 жыл бұрын
@@MotoCheez It's like any other painting, it's all in the cleaning/degreasing/prepping (adhesion). It's like Rhino Lining. About an 1/8" thick when done. Better than undercoating it.
@MotoCheez 4 жыл бұрын
@@RatdogDRB screw undercoating! I usually do the oil base paint because it's easy to touch up. I'll look into the HF stuff, it's 2 part ?
@RatdogDRB 4 жыл бұрын
@@MotoCheez I think it is.
@captsam54 4 жыл бұрын
Very Cool....
@MotoCheez 4 жыл бұрын
Thanks captain!
@vharrald 4 жыл бұрын
Hello moto... looks like nothing's too good for mini... when you raise her bed up you can call it "doing the marilyn monroe" ... lol.. she's looking good moto... but you need to eat more beans, since you keep running out of gas.. budumpbump😁🥳🥳🤣🤪 Hey moto, what about putting conveyor belt down on the rails to help keep mini from rattling.
@MotoCheez 4 жыл бұрын
I may end up doing that. Have some Jeffro gave me when we went in the mine
@thomasbrown9402 4 жыл бұрын
SCISS-OR-LIFT! SCISS-OR-LIFT!
@MotoCheez 4 жыл бұрын
I'd love to... A bit more complex
@badreligion5231 4 жыл бұрын
Thank you for the info....thinking of doing this to my Sambar. Btw that’s not Minis horn....sounds like it Herbie the love bugs.
@MotoCheez 4 жыл бұрын
It is minis horn! 100% I recorded it off videos
@212acres3 4 жыл бұрын
Nice job moto! I always wondered what would the steps be on changing one of these to a dump bed.
@2StrokeSmoke544 3 жыл бұрын
Think i found the video. Musta been when i was away at work and didnt see this..
@aprilgeneric8027 2 жыл бұрын
18:00 dude, you made a clean spot... you know what that means...
@MotoCheez 2 жыл бұрын
Yep!
@fabianfernandoaldazgalvez7926 2 жыл бұрын
Muy buen proyecto
@MotoCheez 2 жыл бұрын
Thanks!
@TravisL.Desmadreson 4 жыл бұрын
Keep up the great work. Awesome content. Cheers.
@MotoCheez 4 жыл бұрын
Thank you
@Chris05STi1982 4 жыл бұрын
Mini needs a motorcycle aftermarket exhaust. Bring the brappps!
@MotoCheez 4 жыл бұрын
I'm thinking about it. Might to an exhaust bypass valve, I do like it quiet in the woods, but pull the lever and BRAPP
@Chris05STi1982 4 жыл бұрын
MotoCheez could get an electronic dump valve to easily switch to open exhaust. A Yoshi muffler would be epic! Give Mini that extra sauce since she has that ram in her lol
@MotoCheez 4 жыл бұрын
@@Chris05STi1982 exactly!!!😁
@allenmckinney9533 4 жыл бұрын
Now make up a pink G-string for her.
@oyaji931 4 жыл бұрын
凄いです😳 どんどん改造してますね😃
@Frits0477 4 жыл бұрын
LOVING IT !!!!!!!!!! Look at my thumbnail
@MotoCheez 4 жыл бұрын
Awesome!
@Frits0477 4 жыл бұрын
@@MotoCheez thanks 😁
@MookieMan1 4 жыл бұрын
I’D PAY A DOLLAR FOR THAT HAHAHAHAHAHAHAH I DIED
@MotoCheez 4 жыл бұрын
😂🤣
@waynecipriano7698 4 жыл бұрын
No i buy that for a dollar from Robocop
@mikeeger7581 4 жыл бұрын
Forget paint where you can’t really see I think rust converter would be best in our area
@MotoCheez 4 жыл бұрын
I've used oil based Rust-Oleum for years, it really permiates the rust and holds it back decent
@43srgrock 4 жыл бұрын
Hell yeah bro cheese man😬💥👍🏼
@fordman77881 2 жыл бұрын
I wanna do this with mine need to make it dump
@mikeeger7581 4 жыл бұрын
Don’t you want to brush or spray on some rust converter on frame since you have the bed off?? Thanks 🙏
@MotoCheez 4 жыл бұрын
It's a dump, I can get to it good. I prefer the oil based paints. Hold rust back excellent. Rust converter is good on rust spots only I've found
@1tacomame 4 жыл бұрын
From up here in Maine, liking the Dysart's sweat shirt bub! Mini like Moxie or Lobsta??
@MotoCheez 4 жыл бұрын
Lobsta!
@craigzondervan7085 4 жыл бұрын
I can tell mini likes her diamonds even if it’s plate
@ur_cowboy 4 жыл бұрын
have you thought of an On board air system for air tools and of course train horns lol
@MotoCheez 4 жыл бұрын
Yes, I already have the air pump and an old military box I have to cut down to fit as a tool box 😁. Need a ship horn. Haha
@SIONARAFLORIDA 4 жыл бұрын
Moto, what brand and model video sunglasses do u use? The link doesn't work. They work great in all kinds of lighting and im interested in a pair. (Thats what she said lol)
@MotoCheez 4 жыл бұрын
😁🤣. Zetronix ultra wide
@odie4207 4 жыл бұрын
Awsome vide!
@davidhamilton7628 4 жыл бұрын
Nice👍
@MotoCheez 4 жыл бұрын
Ty
@brandonboulton2776 4 жыл бұрын
Good enough for the girls I date😎
@brentvonaschen7064 5 ай бұрын
I am gonna try an air piston but there will never be a load in the bed of my S10
@MotoCheez 5 ай бұрын
Air pistons tend to be very springy but if you have no load in your bed I guess it would be fine
@brentvonaschen7064 5 ай бұрын
@@MotoCheez i just got it in 8 inch throw 6 inch diameter case. Something new to me but i am going to try.
@hoagiesherlin7732 4 жыл бұрын
Brilliant!!!
@MotoCheez 4 жыл бұрын
Thanks! Jeffro had the original idea
@chaichail1750 4 жыл бұрын
paint job next please
@MotoCheez 4 жыл бұрын
😁😁👍
@OldF1000 4 жыл бұрын
One thing I have said many times, It don't look to bad if you don't look to close ; )
@stuckinthemudgarden7726 2 жыл бұрын
I have watched most or all of your mini truck videos thanks for the info I have a question can you give me the length of your hydraulic ram you used for your dump bed . Also what is the diameter of it
@MotoCheez 2 жыл бұрын
44" hole to hole open, 26" closed. Ram is 1 1/2" I believe
@narcoticslol 4 жыл бұрын
I love the office memes
@MotoCheez 4 жыл бұрын
Best show EVARRR
@waynecipriano7698 4 жыл бұрын
Yeah that's what she said
@jamesthornton4164 4 жыл бұрын
Hey you being the motorcycle guru along with all the other talents has any one ever asked you about the carburetor on 94 hijet that has a slide instead of butterfly model 87B74
@MotoCheez 4 жыл бұрын
It's a butterfly! A CV carb?
@jamesthornton4164 4 жыл бұрын
@@MotoCheez yes
@MotoCheez 4 жыл бұрын
I haven't dove into the carb on this but I thought it was just butterfly carb...
@jamesthornton4164 4 жыл бұрын
@@MotoCheez sorry didn't get back I've only pull top off found a diaphragm and a slide or piston hope to pull carb this weekend checked the web on this and everybody is out of rebuild or used ones that's why I was wondering if anybody else has asked about them
@MotoCheez 4 жыл бұрын
@@jamesthornton4164 no. Never had mine off. I know my Suzuki had a CV carb, my hijet doesn't look like a CV carb.
@rwlair 3 жыл бұрын
Sir, I saw the front bumper on the yellow “Tonka” mini (Suzuki??) in your driveway, do you know if the owner made or bought it? Thank you!
@MotoCheez 3 жыл бұрын
Jeffro made the bumper
@alembicguyridesagain9428 4 жыл бұрын
Way to hit the tailight!
@MotoCheez 4 жыл бұрын
Yeah... Damn
@Wearyman 4 жыл бұрын
@@MotoCheez It's just a good excuse to give mini some custom LED tail lights! Give her booty some sparkle!
@BarnStangz 4 жыл бұрын
Sweet project man! I have a big boi Mitsubishi Fuso cab over on my channel but I can't wait to get a mini. Much easier to use on my little farm here... I think your dump is coming out mint. Any idea on how much weight you've added so far?
@MotoCheez 4 жыл бұрын
Thanks. Probably 200lbs
@BarnStangz 4 жыл бұрын
@@MotoCheez That ain't too bad. You neck of the woods looks like my buddies Andrew Camarata, do you watch his vids too?
@MotoCheez 4 жыл бұрын
@@BarnStangz no, haven't seen his.. I don't watch too many other KZfaqrs when I'm busy w mini 😁
@BarnStangz 4 жыл бұрын
@@MotoCheez I can understand man! Making videos is really time consuming! Wish I had more time and content. Maybe we I get my mini truck! LOL!
@ABMFluffy 3 жыл бұрын
Where can you get parts for the mini truck? Like axle, suspension, rack’n’pin
@MotoCheez 3 жыл бұрын
Some places in us carry parts. Can also order direct from Japan
@justinfiler7701 4 жыл бұрын
Just wondering why you didn't keep dumpy and you ended up doing this to mini? Just didn't see the value in having 2 mini trucks? Why didn't you do all of the upgrades to dumpy and just get rid of mini. I noticed that you never did much with him.
@MotoCheez 4 жыл бұрын
Mini is in almost mint condition with 38000km, I should have bought a dump when I bought mini... Dumpy was in rough shape Wich is how most the dumps are, they get used and abused. I couldn't see keeping 2 trucks and double the work. Figure out all the time into making Mini the main project.
@tonimews4313 3 жыл бұрын
Hi Motor Cheese, is your truck a button press 4x4 or is it a Leaver with hi & low gears, to get 4x4.
@MotoCheez 3 жыл бұрын
Button 4x4, lever for high neutral and low 4x4
@ericsunsage2880 3 жыл бұрын
Solid work brother! Appreciate the inspiration. Did you go to school for welding? You mentioned self taught? Welds are solid! How many hours did this take you?
@MotoCheez 3 жыл бұрын
Self taught welder. Started with stick welder then mig. I have a lot of hours welding. A lot of large projects! Thanks
@davidd8435 4 жыл бұрын
Well done, whats the price of a OEM dump bed mini truck over a non-dump bed. Saved some money on this project.
@MotoCheez 4 жыл бұрын
About $2000, but they're usually beat up and used hard, in mint condition like mini you're talking $2500 more and up
@danielmerkley4543 4 жыл бұрын
When you test out harley's new springs, will you be sending them back once the test is done? I'd be willing to pay you for one of the two pairs if harley gave em to you.
@MotoCheez 4 жыл бұрын
He says I can keep them. I do have an extra set of blue springs. My strut spring length is 2" longer than normal which is why I was bottoming out with 10" springs instead of 12"
@danielmerkley4543 4 жыл бұрын
@@MotoCheez I'm pretty sure I remember from your earlier videos the blue ones were 10in 250lb? I just went out and put a tape measure on mine and the spring is only 7in??! WTF, no wonder I was bottoming out. Did yours have a 7" spring on it? Does the stock strut have three inches of play to add a 10" spring?
@MotoCheez 4 жыл бұрын
@@danielmerkley4543 that was your measurement jacked up? I think I was 1" too high. Been a while. I think it was 9 and 7". I'll have to find the old video. The spring is longer if course. I didn't even need a spring compressor to put them on
@danielmerkley4543 4 жыл бұрын
@@MotoCheez Good point, it was 7" under pressure. I'm sure jacking it up will add the extra couple inches I'm missing ;). I think I'd prefer the progressives from harley, but how much do you want for the blue springs? I believe Harley is asking $200 for the new progressives springs or $350 for the springs and a modified rear air lift. Shipping to AZ 85140.
@kayakwesty 4 жыл бұрын
Did you add a prop bar for safety? Love the video
@MotoCheez 4 жыл бұрын
Not yet, I have a dowel for now
@buckeye9252 7 ай бұрын
Your welds look like shieet Except that one weld..you know which one I'm talking about. Do it like that. Nice
@MotoCheez 7 ай бұрын
😁
@williammorrow627 3 жыл бұрын
What is the little torch you are using to cut the thinner steel?
@MotoCheez 3 жыл бұрын
Plasma cutter. Thermodynamics
@n0madIPX 4 жыл бұрын
So is there a plan now to replace the tail lights? When I saw ya do that I went ouch.....
@MotoCheez 4 жыл бұрын
Have to find lenses. I left them lower for now. Bed would not dump because of rear hitch so had to do that.
@Fm_1055 4 жыл бұрын
You should rename mini to mini dumpey now
@MotoCheez 4 жыл бұрын
Might have to!😁
@loganholmberg2295 4 жыл бұрын
Don't you think it'd be better to spray some rust inhibitor on the plate before painting it?
@MotoCheez 4 жыл бұрын
Not with oil based paints, Rust-Oleum is a rust inhibitor
@loganholmberg2295 4 жыл бұрын
@@MotoCheez Ah missed that. Don't know why you using Rustoleum flew right over my head. lol
@MotoCheez 4 жыл бұрын
@@loganholmberg2295 😁👍👍
@johncooper9976 4 жыл бұрын
Why did you eat rid of Dumpy?
@MotoCheez 4 жыл бұрын
Because mini is in much better shape, and now I have her a dumper
@Odd_Redneck 4 жыл бұрын
10:00 tractor supply and taco bell.
@kayakwesty 4 жыл бұрын
#WUMT
@680ecks 4 жыл бұрын
Soak that rubber stuff in 606
@MotoCheez 4 жыл бұрын
That'll soften it?
@680ecks 4 жыл бұрын
@@MotoCheez should works great
MotoCheez
Рет қаралды 14 М.
MotoCheez
Рет қаралды 63 М.
Matt Spears
Рет қаралды 1,3 МЛН
MotoCheez
Рет қаралды 35 М.
Mini-Truck (SE02 EP04) Happy we back. Dumpy dumps a big load at the Salvage Yard. Suzuki Carry Hijet
MotoCheez
Рет қаралды 33 М.
MotoCheez
Рет қаралды 795 М.