Encase it wasn't clear enough, I will be doing a draw through setup. The carburetor will only see vaccum, from the spinning turbine blade and engine. Many drag cars actually used a Carburator/turbo setup. Hope y'all enjoy

Please stay with the predator engine. I like how you are building something within reach of allot of us. Very ingenious young man. Stay sane, safe and healthy.

That hurt a little to see the engine running with no turbo oiling 😬

You asked for my thoughts so I ll give them to you. Oil in the turbo without oil pressure and you reving it equals fried bearings really fast. What is it with people thinking that its not the oil pressure that keeps the bearings floating and removes heat from them? Don't do questionable stuff like that. Also depending on the 2 cylinder engine and when the valves for each cylinder open and close, you may need an air capacitor after the turbo to act like a boost reservoir or the thing will not even function properly. When you put an oil feed on the turbo, go for the highest pressure oil pump you can get and make sure your oil drain is as big as possible, people think that they need to limit the oil pressure to the turbo when in reality you can put as much oil pressure as the drain allows to flow back out of it. The higher the pressure the better, just dont overdo it and cause the seals to leak.

Aw man! That is so sick, I love hearing that thing spool! I'd love to see you keep the 670 because I think it is so close to being perfect

You have inspired me to truly know that I can do anything mechanic wise with enough time and practice, thank you for that.

I’m super impressed with how far you’ve come on this buggy. Reminds of my early teens when I was so eager to build stuff, now I’m in my 30s and lazy. lol. But seriously great job man, can’t wait to see this little beast get some boost

I really can’t explain how excited I am to see this thing run! Awesome🤙

You and your videos I look forward to the most these days you are the only one I'm really interested in watching anymore keep up the good work I have not watched this video yet but I'm watching it now

I think you're on the right track, don't even think to turn away, I've built many Harley engines, as well as quite a few others, been doing it more than fifty years. You have done more for power than I could ever do for the same money, on "a real engine". That one's just fine, I'm looking at turning a B&S vertical into a horizontal, just because I've got one laying around, and looking to a similar project, for a bike. Thanks for showing these, I've been watching you through from the beginning of this engine. I'm also watching a build with a supercharger, and believe for your purpose, you've got it going right. Thanks for showing this, excellent welding, sound engineering, and far cheaper than "name brand ways". Thanks again.

Very impressive for a young guy your age. You definitely have some skills. Great ideas. Thanks for the video

Please please STOP running that engine without oil to the turbo, it needs more then a few drops...

Wow it sounds like it's going to work! Can't wait! 😉

Dude you are doing great! Super good quality in filming and the end result of the build is awesome! Keep it up!

That is how you cook a turbo buddy...

Great job on your build I’ve watched for some time now very impressed thank you for taking the time to share your ideas and work

Can't wait to hear it completely run. When it is all fully together and on its own power going down the trail

Man keep building it!!! It’s improving every time...

I got to say I'm really impressed with your mechanical ability. Ive watched a lot of your content, and you do an awesome job of figuring things out for as young as you are. Great job!

I would add some additional reinforcement from the turbo flange to the engine- you really don't want it moving around at all because it's very hard on the bushing and impellers. Under sustained high speed vibration the impeller shaft will either bend or round out the bushings, something you don't want to happen. And I just realized that's the catch can lines not feed lines to the turbo. RIP bushings, they're going to blow oil when you actually pressurize them.

Turbos on go karts/buggys are just plain awesome. Can't wait for the next video!

Damn bro you are seriously the man. You put so much passion and creativity in your work. I always try and send you a few bucks when I can, you deserve every dime.

Nice can’t wait for next episode keep em comming!!! Your doing well my friend

This is soooo fricken sick dude! You are always pushing things to a new level! That thing sounds goooood spooling

the ying yang spinny thang sounds so cool!

Before it's all done and said you'll be putting tag and insurance on this bad boy and making it a daily driver! This is one of the craziest builds that I've ever seen! #Vasily #Unstoppable

Nice! I can’t wait! Good job bud

Love your vids man all the best from Ireland

Your builds are reaching that next level son! We gotta meet one day when I'm back in town. Love what your doing!

Never cease to amaze me

Turbos generally need oil pressure to get proper lubrication everywhere so I’d be careful running it like that at all even if you put some in there

Good to see u back at it and unshaken by the crash good man big love from UK

Ur getting good with those welds, keep up the GR8 work brother!!!!!

That little whistle from the spool up is awesome 👍🏼

Love your videos.just wish they were longer. Good job kiddo

I put a small turbo on a 2t scoot years ago. It would spin it but this was over 10 years ago so my knowledge wasn't quite there. I'd like to think that I could definitely make it work now. And I hope that you do. Anyone can put a bike engine in one. Keep it unique. Love the channel.

I was waiting for this😀

Man that is so cool bud you did a amazing job on this super sweet sounds so good I can hear that bad boy spooling up.

That thing looks wicked 🤘🤘

Vasily! Injecting a bit of much needed normalcy in these crazy times. Keep up the good work.

The build is getting better and better

So many people have tryed that turbo on small engines. i have yet to see ONE that actually works, and makes some power. good luck, ill be waching. (who does not love small turbos lol)

"More power can never hurt💀"u funny bro like fr😂😂

Nice dude very nice, be safe and bless you and your family

It looks great!

It looks so SICK!!!!!!!

Great working.

Great job bud 👍 lost it when you presented the large turbo for fitment 🤣

Your like the goonzquad of karting. Love your vids. Keep it up 😊

Great welding skills!

Wow can’t wait to see this

Sounds great 👍.

Awesome Job

This may turn out very awesome.When you removed the filters there was a bit of blow back through the carbs ,so I think there's plenty of fuel and compression to use that turbo easily.I think you can make a small'charge tank'between the turbo and carb and it should be enough.Rock on Vasily.

This turbo will definitely take this buggy to another level of power..Nice work bro

Jesus boy ait it torque-y enough lol cant wait to see the wheelies it does

awesome set up mate

Awesome !!!

that turbo sounds f***ing nice man you need to keep that that build going

Very Impressive!

This channel deserves more recognition, great vids

I look forward to see how this works out!

0:25 "I realized that more power could never hurt" you're crazy😂😂 For real I don't know if you have already done it but after the accident you had I suggest you to put a seat belt and a killswitch or at least a killswitch on your buggy. Nice work fam keep it up🔥🔥

I say go for it! If you don't try you won't ever know for sure what the outcome will be. Best of luck.

Hell yeah man awesome

Those are some mighty fine welds

Good job homie

Do it! Go full out! Love it man very cool👌🇺🇸

Love this buggy its amazing

Keep it up. I wish I had a channel like that.

Another great concept brought to life! Peace.

Thx you awnserd my comments 🤩

Go for it!

He did it👌👍

I did a draw thru setup with a Garrett GT20 on my Rhino 660. People are very convinced that carbureted and single cylinder engines both cannot be successfully boosted, however I have the thing running mint. I think you will be able to make the V twin run pretty well. You might need to get a wideband gauge to at least just use temporarily for tuning. My low speed jetting is only up 1 or 2 sizes from what normal mods call for, however my high speed jet is at 6 or 8 sizes more than normal to keep a safe afr under boost and not bog. Interested to see what happens

Super sick

OMG SO COOOLLLL MAN!

Thank you my friend you are the best am zeyad odeh from Jordan 🇯🇴

dang. thats so cool!!!!

Good stuff

Dude this buggy is going to be sick. You have a special talent man keep at it. Would like to ride with you sometime

Damn I never seen a video of this thing running!!! I thought you were still building it how did I miss this!!!

Awesome this is gonna be cool

Yeah man it's sick bro

Good job, cant wait to see. Now do EFI and tune like Matt suggested..

Sick man 🤘🤘🤘🤘👌

Hell yess!

That’s pretty cool

THAT SOUNDS SO good im so suprised it had a nice sound on a go kart

Keep going! I want to see the results.

Am atv engine would be the most efficient and cheap way to go but they do get overwhelming with the wiring. That turbo sounds just uff! So noice!

Sick!

Awesome

Thanks for the distraction from the woes of the world at the moment fella. Stay safe boyo.

Not wanting you to wreck again, but I'm really enjoying the mechanical experimentation!

Curious to see how this works, keep it up man!!

I wish there was a league for custom builds like this and power wheels . Like Mario kart. But love your builds !

Now this is what I like to see

It'll work great with the EFI setup or mikuni style needle seat carbs

Hope you can get it sorted that would be cool 😎