My upgrade motor: Basher Torque 130 Size Brushed Motor (Orange) Hobbyking 9249001308-0 (discontinued product)
Пікірлер: 27
@rseficomalta3 жыл бұрын
Thank you . I happen to have a few of those Basher Torque series I will try.
@Diamondbac4 жыл бұрын
One thing though is that the Tamiya motors are built for only 3v so the high performance ones tend to overheat quickly. Plus they draw a lot of amp so they may damage your ESC. But I think the high torque ones for slow crawling is alright. I tried the Plasma Dash on my buggy and I couldn't run it for more than a minute before the circuit breaker kicked in.
@donaldsneffe4 жыл бұрын
OK, thanks. Do not have any experience with those motors. Found the list when searching for 130 torque motors in the net and then found those 2 unbuilt Mini-4WD in my mess and that they do come with 130s, too. Bought them once to maybe use the bodies in a Orlandoo once...
@donaldsneffe4 жыл бұрын
You need upgrade fets for those motors probably. I do have similar Atomic motors (fast, not torque), which do already have a sticker on the package "upgrade fet needed".
@Diamondbac4 жыл бұрын
@@donaldsneffe From your videos, it looks like you are savvy with electronics. Please make a video on how to upgrade FET if you know how!
@donaldsneffe4 жыл бұрын
@@Diamondbac There is already a video - kzfaq.info/get/bejne/e8pylsSdz7-dgnU.html It is not so difficult. Most difficult/dangerous is removing the old fets. You need very good eyes or a magnifying glass. Check the equipment I use in the description under the video, not very special or very expensive. Wont need the micrcoscope, a loupe will do the job, too.
@TheTruthHz3 жыл бұрын
Love these videos. But I have to ask a question. I have just bought one of these Jimny trucks and I am disappointed that the car leans to one side when driving forward and to the other when driving backwards. Is this normal with the Jimny body? My Mini Z with the Jeep body doesn't do it. Hope you can help.
@donaldsneffe3 жыл бұрын
It is probably a problem with drive train or shocks. Take out the motor and check if everything moves freely, including links and shocks. Probably a minor problem which can easily be solved. A tiny little bit of leaning is normal...
@TheTruthHz3 жыл бұрын
@@donaldsneffe That's an excellent suggestion. Thanks for that!
@cr3a1ur372 жыл бұрын
i have the same problem, did you ever resolve it?
@TheTruthHz2 жыл бұрын
@@cr3a1ur37 yes, it was down to the diff housing being too tight against the gears. Remove the offending diff from the drive train and check it's running free. I had to open it and remove some flash from the moulding on the lower half of the clamshell.
@cr3a1ur372 жыл бұрын
@@TheTruthHz thank you!
@mini-zph23604 жыл бұрын
Great video! I love it
@ralfromer76764 жыл бұрын
👍👍💪💪💪
@florianbleier33464 жыл бұрын
Hallo,hab was interessantes rausgefunden.Wenn du die bremse gedrückt hältst und die Fernbedienung einschaltest wechselt man in den Schüler Mode und hat mehr gefühl beim fahren,der ideale Crawler Mode.Das gleiche umgekehrt mit Gas halten und Sender einschalten dann ist es wieder normal.Viel Spass beim ausprobieren.
@donaldsneffe4 жыл бұрын
Sehr cool! Danke - werd ich gleich probieren!
@mamoteam87444 жыл бұрын
By changing the engine you slowed down your movements, it feels more fluid
@trevorthomas60432 жыл бұрын
You should checkout atomic Rc products,Also atomic products are for micro vehicles.
@donaldsneffe2 жыл бұрын
I know those, even bought for my other Mini z. But I thought, they closed the company recently?
@trevorthomas60432 жыл бұрын
@@donaldsneffe they sold the business new owners have taken over.
@donaldsneffe2 жыл бұрын
@@trevorthomas6043 Found a 41000 KV Atomic motor new in box in my Mini-z parts box - not the right motor for the 4x4 ;-)
@euroboyrc4 жыл бұрын
Hey. Nice Video. Can you explain to me, what are These capacitors Good for? Maybe you can answer in german, If you like.
@donaldsneffe4 жыл бұрын
Die Kondensatoren dienen dazu, Störungen anderer Signale oder elektrischer Geräte zu vermeiden. Sonst kann es zu Störungen z.B. beim Servo kommen, ev. beim Empfänger, aber auch bei anderen "Funkern", die nicht im Auto sind (so ala aus Omas Zeiten: Die Nähmaschine ohne Kondensator am Motor störte den Fernseher...). Warum da jetzt 3 drauf sind und bei den alten Mini-Z 2 und bei anderen Autos mit kleinen brushed Motoren nur einer... weiß ich auch nicht. Ein Kontakt soll wohl jeweils auf Erde geleitet werden.
@euroboyrc4 жыл бұрын
donaldsneffe super vielen Dank. Das war eine Frage die ich mir immer gestellt habe.