MINIWARE Motion Control Electirc Screwdriver ES15 Open Box & Review

No video

MINIWARE Motion Control Electirc Screwdriver ES15 Open Box & Review

Рет қаралды 15,533

MINIWARE

Күн бұрын

More information:
www.miniware.co...

Пікірлер: 43

@nilomyki 2 жыл бұрын

Hi there. How about a proper stand for the TS100 and TS80P (I've had loads of accidents with the TS100 burning everything due to lack of a proper stand and non heat-resistant stiff power cable). And perhaps a new mini Hot Air Gun/Station?

@michaeldewitz1940 3 ай бұрын

Why is the Run Button not 3 way? Right, left and middle? Would allow forward and reverse motion in manual mode, without entering any menue. In fact it already feels like a 3 way button. 🤔 Being able to adjust torque and/or speed, by the angle of rotation in auto mode (or even manual mode) would also be a nice feature for a firmware update. 😉

@BeefIngot 2 жыл бұрын

I really like this screwdriver and motion control is cool for screws that aren't very difficult to remove but I wish there were still 2 buttons just so that with 8 harder to remove screws you could use the screw driver like a ratchet.

@S-I-R-E 2 жыл бұрын

Why did you guys decrease the torque from 2.5 Kgf/cm in ES120 to 1.6Kgf/cm in the ES15

@TheBrenoMac 2 жыл бұрын

Obviously, because speed

@ChaiZhenZhe 2 жыл бұрын

这个螺丝刀工作状态下，可以连续打紧多少颗螺丝？

@alexandruradu655 Жыл бұрын

I also bought one last week, I like it but how you can switch it off??

@miniware Жыл бұрын

You can lock the keys, or you can also enter the storage mode

@tannerbass7146 2 жыл бұрын

Fantastic work 😁 An word on an electronic load for those mdp things?

@lamb1228 5 ай бұрын

請問....ES15太久沒用，沒電，充電完，沒畫面，沒螢幕怎麼辦？可以送哪裡維修嗎？沒想到....久沒用就掛了。

@miniware 5 ай бұрын

请发邮件至 service@minidso.com

@VanDuc1126 2 жыл бұрын

Nam châm của đầu bit thật tệ, sau khi bắt vài con vít nó đã mất từ tính, không thể hút được các con vít.

@RicardoCooper 2 жыл бұрын

Hi would it be possible for you to create a attachment / bit that would act as a Grindr for PCB solder mask

@Doubles_Advocate 2 жыл бұрын

As a what? 😳

@RicardoCooper 2 жыл бұрын

@@Doubles_Advocate kzfaq.info/get/bejne/prmllLZilrfJh40.html

@mikevanin1 2 жыл бұрын

@@Doubles_Advocate According to Wikipedia, Grindr is "a location-based social networking and online dating application for gay, bi, trans, and queer people". So, I guess that this requirement is from a homosexual who wants to locate, and assemble or repair, circuit boards for others of the same persuasion?

@BeefIngot 2 жыл бұрын

I really wish the where links to where you can officially buy this. I have looked for a while and am not sure where to go/which sellers to buy from. Are their official links to purchase anywhere?

@miniware 2 жыл бұрын

www.aliexpress.com/item/3256801685886890.html www.amazon.com/YKEY-Upgraded-Screwdriver-Rechargeable-Cellphone/dp/B07952N5PH/

@bowang9032 2 жыл бұрын

hi how to engage in lock mode?(just like when it first arrives) I don’t want the screw driver to engage during transport. Thank you

@miniware 2 жыл бұрын

Turning on the battery management mode will lock the keys, but will also discharge to 50% for easy storage.

@shenlun 2 жыл бұрын

Can you fit the extension bar to this, for when you are working on a pc within a case?

@miniware 2 жыл бұрын

You can use standard 4MM extension bars.

@greenone41 2 жыл бұрын

Loved this so much that I decided to buy one. After receiving it went for a firmware update but that then corrupted the firmware. Anyone knows how to fix this?

@miniware 2 жыл бұрын

You can download the user manual and new firmware: www.minidso.com/forum.php?mod=viewthread&tid=4611

@greenone41 2 жыл бұрын

@@miniware The issue is that the device is now showing up as unknown, so I can't install any firmware anymore. I've sent you guys an email, but I didn't get a response there yet

@miniware 2 жыл бұрын

@@greenone41 Please email to service@minidso.com

@Giddykippa65 2 жыл бұрын

hi wondering if you can help me i just bought a ES15 Miniware screwdriver and tried to do a firmware update i switched off screwdriver plugged into my pc opened it in my pc tried to drag update but it says there isn't room only 8KB available and update file is 142kb what did i do wrong ? any help appreciated paul

@miniware 2 жыл бұрын

You need copy to the DFU disk, Hold "set" key and plug in the usb cable to computer, You will see the dfu disk.

@Duraltia 2 жыл бұрын

Can someone explain to how you *_Lock_* the Device? I keep pressing the SET Button, but nothing happens other than either toggling between Torque Modes or bringing me into the Settings Menu? 🤔 Or is it only meant to be unlocked once after you've received it? 🤨

@miniware 2 жыл бұрын

Turn on the battery management mode in the menu, you can lock the keys, but the ES15 will automatically discharge to 50% to save. This is not recommended if using ES15 every day.

@mikevanin1 2 жыл бұрын

@@miniware How does discharging the battery to 50% create any advantage?

@miniware 2 жыл бұрын

@@mikevanin1 The best storage state of the battery is at about half power.

@CoopzVideo Жыл бұрын

@@miniware if it's a lipo battery, is the optimum storage voltage not 70% (3.8v)? I'd suggest battery management could be renamed to make it clear that this setting is only for storage - I think a lot of people will misinterpret battery management as being a power saving mode that reduces screen activation time to conserve battery. (Perhaps that could be added as another option.) And perhaps a simple button lock feature would be good to stop the device from activating accidentally whilst in a tool bag or pocket.

@maxfoxed 2 жыл бұрын

Could you send me one to germany for german product review?

@ivanpapaccio1745 2 жыл бұрын

Che differeza c e fra questo e il sequre

@ftt2757 2 жыл бұрын

Mine es121 broke so soon :( [*] some electronics died from doing nothing

@ftt2757 2 жыл бұрын

@Stas Prokofyev nope, battery is good :(, no support :(

@Sebastian-Florin Жыл бұрын

Hello, give me more details about the soldering device because I want to buy one just like it. Tell me if it's worth it, tell me what you don't like about it, and what you like.

@icesystem7 2 жыл бұрын

too much menu fiddling, there should have been buttons/rotating knob to change the settings

@nossal Жыл бұрын

I'm very disappointed. My unit's battery doesn't last a day. Every time I pick it up, I need to charge it, even when the last charge happened less than 24 hours ago without using it.

@miniware Жыл бұрын

Did you turn on the "BATTERY-M" storage mode? After turning on this mode, ES15 will automatically discharge to 50% to protect the battery when it is not used for a long time.

@nossal Жыл бұрын

@@miniware No, the "BATTERY-M" options is turn off.

@miniware Жыл бұрын

@@nossal Please email to service@morningtools.com, we will help you.