No video

Minn kota Terrova trolling motor repair. Steering sleeve replacement. 2022 Model

  Рет қаралды 6,073

steve haddock

steve haddock

Күн бұрын

Replacing the steering output ring on my new Minn kota Terrova trolling motor.
Terrova trolling motor repair.
Link for the part: amzn.to/3LJ9fD1

Пікірлер: 41
@cheechkehoe4039
@cheechkehoe4039 Ай бұрын
Great Video!!! It took me a couple hours and all better now. I look forward to NOT having the slop in the steering. Thank you for posting this video because I would have not have had such confidence going in without it.
@STEVEHADDOCK
@STEVEHADDOCK Ай бұрын
@@cheechkehoe4039 no problem at all, glad it worked out for you.
@davidblanston609
@davidblanston609 2 ай бұрын
Best video for this repair on KZfaq. Thanks!
@STEVEHADDOCK
@STEVEHADDOCK 2 ай бұрын
Glad it helped.
@thejohnsons2444
@thejohnsons2444 3 ай бұрын
Thanks to this video this fix only took around 2 hrs. I was able to go about it like I've done it before. Real good instructional video.
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Glad it helped.
@josemanuelgonzalez2159
@josemanuelgonzalez2159 3 ай бұрын
Un saludo desde Asturias - España , un muyyyy buen video , muy ilustrativo y muy técnico
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Hello back to Spain. Thank you for the positive comments and thanks for watching.
@JTacci1
@JTacci1 3 ай бұрын
I need to do this exact replacement, thanks for making this video, I would not have attempted this without first watching your video.
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
No problem, hope it goes well for you.
@juandieguez543
@juandieguez543 4 ай бұрын
Great video. Just replaced my broken ring this past Saturday. Thank you for the video.
@STEVEHADDOCK
@STEVEHADDOCK 4 ай бұрын
No problem. Glad it helped
@arksoonerfan
@arksoonerfan 7 ай бұрын
Thanks, very helpful. I just replaced my ring as well.
@STEVEHADDOCK
@STEVEHADDOCK 7 ай бұрын
No problem, glad it was helpful. I hope your's went well.
@noahperkins4210
@noahperkins4210 9 ай бұрын
Great video! Great instructions! Exactly what I was looking for to help me tackle this job.
@STEVEHADDOCK
@STEVEHADDOCK 9 ай бұрын
No problem. Glad it helped.
@peterlaniosz6560
@peterlaniosz6560 Жыл бұрын
Missed So much..........Kept looking at the Mustang !!!!!
@STEVEHADDOCK
@STEVEHADDOCK Жыл бұрын
LOL. Still lots to do on the Mustang but it's coming along. 1969 Shelby GT-350.
@JeffBattleFish
@JeffBattleFish 5 ай бұрын
Great idea on how to handle the lift assist spring. A couple months after fixing mine it broke again when I hit a log. Very bad design. I'm not going to fix it again as it still steers just fine.
@STEVEHADDOCK
@STEVEHADDOCK 5 ай бұрын
Thanks. Sorry to hear yours broke again. I agree, crappy engineering. Should have made it a split collar if it’s intended to be the breaking point.
@jeremyking7216
@jeremyking7216 9 ай бұрын
I noticed that when replacing the collier, There is a teflon ring on the top of the collier that you forgot to pull off and place on the new collier. I hope that doesn't cause you any issues down the road.
@STEVEHADDOCK
@STEVEHADDOCK 9 ай бұрын
It ran great all summer. I think the ring you are referring to stayed in the top of the steering box while I replaced the collar.
@caucatieubangfloridaoffici1355
@caucatieubangfloridaoffici1355 9 ай бұрын
Thank you so much for your vid. My shaft spring just came off I try to contact Minn kota tomm. Bc mine just couple months old. Thanks again
@STEVEHADDOCK
@STEVEHADDOCK 9 ай бұрын
No problem. Glad it was helpful.
@michaelwallace7587
@michaelwallace7587 9 ай бұрын
I use spring loaded claps on the shaft to hold the spring and just hook the collar on to keep the spring from retracting. There is tool you can buy to guy the spring back through the housing. I have spare housing to switch out. This happens to me at least one a year. It helps to tape the wires together and guide them back through the head.
@STEVEHADDOCK
@STEVEHADDOCK 8 ай бұрын
Thanks for the suggestions.
@meadrenalinejunkie
@meadrenalinejunkie 3 ай бұрын
I have noticed my Terrova has something yours does not. And I cannot even see it on the parts schematics..... between the connecting collar for the lift assist and the steering box there is a plastic sleeve that is on the shaft and around the metal strip for the lift assist. I find it odd, I cannot find it on anyone elses videos, I have looked at the bottom of the steering box and it is not from there. Maybe just a part they decided they no longer need to put on the Terrova's?
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Possibly so. I don’t ever recall seeing that part either.
@gregdodds4017
@gregdodds4017 5 ай бұрын
Could you have left mounted it on the boat and replaced that coller?
@STEVEHADDOCK
@STEVEHADDOCK 5 ай бұрын
I don't see why not. As long as you can get to everything. Mine is mounted on a quick disconnect plate and that makes it much easier to take on and off.
@phillamoore157
@phillamoore157 8 ай бұрын
My god...what a nightmare for a part that's $1.00. My Terrova Riptide (2023) just had this happen. It makes a really high-pitched squeal when ran at full throttle. I don't know if this is the reason, but I did notice it was cracked. Got two of these on order, just in case it breaks again (which is likely given how many people are having to replace this)....but, this puts a really bad taste in my mouth with Minn Kota. If they're going to use parts this fragile, I just assume they make the unit easy to repair. This is nauseating.... That said, I'm grateful to you for posting how you did this. And, my motor has only been on the water 5x's. I believe mine cracked when I hit a stump...going fairly slow (flipping speed). Guess, I got a nice little job in front of me. I need to shorten the shaft, as well, so I guess I'll tackle everything at one time. Thanks again for taking the time to show how you did this.👍
@STEVEHADDOCK
@STEVEHADDOCK 8 ай бұрын
I agree, pretty ridiculous amount of work for such a small part. They should have designed it with a break away piece that could be easily replaced. Good luck your repair.
@phillamoore157
@phillamoore157 8 ай бұрын
@@STEVEHADDOCK Thank you Steve. Picture me with my laptop pausing your video every 3sec trying to follow along for 5hrs when these parts arrive...lol. What a mess. I've never been bad with a screwdriver and can handle most repairs thrown at me. But, this is a mess. I can all but guarantee that this is the last Minn Kota I buy. Thanks again for the video, it will be my guide when these parts come in. 👍
@meadrenalinejunkie
@meadrenalinejunkie 3 ай бұрын
mine broke and now the spring lift assist is messed up. I will need to replace the lift ugh. I am trying to find the part number for this sleeve. Mine was also a 2022, i am wondering how many ppl have 2022's that this has happened to.
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Hey bud, I was out of town last week. Did you get that part number you were looking for? I think it should be in my links on this video.
@josemanuelgonzalez2159
@josemanuelgonzalez2159 3 ай бұрын
Alguien me podría decir un lugar hay en EEUU donde comprar repuestos de minn kota , ya que aquí en España no se encuentran fácilmente , un saludo.
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Here is a link for the manuals. Hopefully you can find the part numbers there. minnkota.johnsonoutdoors.com/us/support/manuals
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
I just spoke with Minnkota here in the U.S. and they are going to send me a link that I can post here and they said it should give you a place where you can type in your local post code and it will give you the closest place for you to buy parts. You could also possibly find a lot of the parts on Amazon if you can order from there.
@STEVEHADDOCK
@STEVEHADDOCK 3 ай бұрын
Service providers locator minnkota.johnsonoutdoors.com/us/support/service-providers/locate
@kyleveitengruber2368
@kyleveitengruber2368 Жыл бұрын
Mine is starting to get some sloppy steering and I checked mine same thing is broke . I’m guessing that the reason. Thanks for the info.
@STEVEHADDOCK
@STEVEHADDOCK Жыл бұрын
No problem. Yeah, the steering will get pretty sloppy if it’s broken.
How to fix a Minn Kota Terrova steering housing assembly for $2
13:11
Blueberry Ridge Outdoors
Рет қаралды 20 М.
Oh No! My Doll Fell In The Dirt🤧💩
00:17
ToolTastic
Рет қаралды 10 МЛН
Bony Just Wants To Take A Shower #animation
00:10
GREEN MAX
Рет қаралды 7 МЛН
Dad Makes Daughter Clean Up Spilled Chips #shorts
00:16
Fabiosa Stories
Рет қаралды 3,1 МЛН
2019 Minn Kota Terrova Steering Box Repair
27:24
beowulf77
Рет қаралды 36 М.
Minn Kota Trolling Motor Tear Down and Repair
29:48
The G Automotive And More
Рет қаралды 75 М.
Minn Kota Ulterra Servicing Tips 1
11:21
Spear N Tackle
Рет қаралды 2,9 М.
Minn Kota trolling motor shaft replacement
13:38
Pro Wrenching
Рет қаралды 55 М.
MINN KOTA Ultrex Steering Issue | They FIXED it for FREE
13:21
Red River Living
Рет қаралды 2,1 М.
Minn Kota Terrova Control Board Replacement // Step-By-Step Guide
11:04
Trolling Motor Parts
Рет қаралды 3,8 М.
4 Inch Trolling Motor Lower Unit Disassembly & Assembly | Minn Kota
12:26
Minn Kota Tutorials
Рет қаралды 31 М.