I made a Dice from steel and brass leftovers

Рет қаралды 919,190

7 ай бұрын

Your Support makes these Videos possible! Become my Patron here for supporting my work: patreon.com/misterpatina
My other channels:
Facebook: MisterPatina
Instagram: misterpatina
In this video I made a Dice from steel and brass leftovers :-)
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-) Thanks for watching!
I made a DICE from steel and brass leftovers
#dice #lathe #makingstuff

Пікірлер: 753

@misterpatina 7 ай бұрын

It weighs 114gr. (4 ounces; 0,25 pound) 🙂✌️

@fakebobbyhill296 7 ай бұрын

A little tip so that you don’t need a reference for the dots on a die. The opposite sides all add up to seven. 1 is opposite 6. 2 is opposite 5, and 3 is opposite 4.

@Dirk_Mcgurk 7 ай бұрын

ok, but what is to the left of 1. or right. underneath.

@hicham1101 7 ай бұрын

قمة الدقة و الإتقان ، تحية كبيرة لك من المملكة المغربية.

@fakebobbyhill296 7 ай бұрын

@@Dirk_Mcgurk Well underneath 1 is 6. The other four sides are 3&4, 2&5. It doesn’t really matter which sides you put them on because the die’s weight will be balanced, and it can face any direction. So if you turn it 90 degrees a different face will be on the left.

@user-yd2vi7me4n 7 ай бұрын

Надеюсь сталь нержавеющая. I hope the steel is stainless.

@SirWulfrick 7 ай бұрын

4 more of those would make the loudest game of Yahtzee ever.

@misterpatina 7 ай бұрын

Haha, they’d throw sparks while playing 😅

@worldscoolestusernam 7 ай бұрын

You didn’t roll it…why didn’t you roll it!?

@andrewhooper5645 7 ай бұрын

RIGHT?!!!

@Impecable.. 7 ай бұрын

@@andrewhooper5645woah 4 seconds ago

@madmax82988 7 ай бұрын

He might sCrAtCh it

@geraldstamour1312 7 ай бұрын

It's 4 ounces, @worldscoolestusernam! It's more like a paperweight at this point!

@NoReverse77 7 ай бұрын

It won’t roll even, it’s not balanced like normal dice. Just a beautiful,desk piece :)

@nachtdiertje1972 7 ай бұрын

Beautiful piece of work and craftmanship. At last someone who knows how analog machining works. No DRO or other digital gimmicks, just experience and craftmanship. Great Job.

@misterpatina 7 ай бұрын

Thank you so much, I really appreciate! 🙂

@EmckuuAlexander 7 ай бұрын

AMAZING!

@misterpatina 7 ай бұрын

Thanks!

@colinbuck8687 7 ай бұрын

Watching that pressing adapter slip onto the vise was sooooo satisfying.

@thedrakestorm8755 7 ай бұрын

i wish i was properly taught how to use the lathe and mill in my high school shop class, videos like this one would have made great teaching projects.

@misterpatina 7 ай бұрын

Thank you so much! I started with 0 experience, learning by doing :-)

@TheScubaboy56 7 ай бұрын

So cool!

@manmohansingh1642 7 ай бұрын

Dice that not rolled. Great work as always. Masterpiece

@misterpatina 7 ай бұрын

Thanks!

@swenneumann7205 7 ай бұрын

Respect.Worldclass.

@misterpatina 7 ай бұрын

Thanks!

@kingsanta2248 7 ай бұрын

so smooh and shiny..great job

@misterpatina 7 ай бұрын

Thanks!

@icealchemist9122 7 ай бұрын

D20 metal dice. This is the real challenge👍

@misterpatina 7 ай бұрын

Challenge accepted 🙂

@paulinobenito6905 7 ай бұрын

Great job 👍

@misterpatina 7 ай бұрын

Thanks!

@jerryjohnson4618 7 ай бұрын

Magnificent Craftsmanship !!!!!!!!!! Two thumbs way Up !!!!!!!

@sebastiannielsen 7 ай бұрын

A suggestion: Fill the dots with something transparent that have the roughly same weight as brass, so the dice become ultra-fair.

@SuperDavidEF 7 ай бұрын

Ultra-fair would be a good idea. But it doesn't HAVE to be transparent. Black or red would look good, too!

@misterpatina 7 ай бұрын

I will, when I make the d20 dice 😅

@Galerak1 7 ай бұрын

Another suggestion would be to pre-drill 4mm thick brass disk blanks with your hole patterns for 1-6. The pre-drilled side of these disks will then be the side that gets pressed into the steel block so the dimples are hidden (it will be an idea to mark them on the blank side so you know which is which). Once you have them all pressed into place drill the 6 side with 1 dimple, the 5 side with 2 dimples, 4 side with 3 dimples and so on. That way each brass disk will have the same 7 dimple's worth of mass removed. A 3mm drill, sharpened at 118° has a tip depth of around 0.9mm, if the dimples are drilled to 1mm that gives 0.1mm for polishing the sides to a high sheen without leaving a step. Hope that makes as much sense to everyone as it does in my head 😂

@sebastiannielsen 7 ай бұрын

@@Galerak1 Thats a great idea, even better than filling the dimples with brass-weighting transparent material.

@Tasarran 7 ай бұрын

Or not transparent... Filling them with solder would make them silver...?

@mistert2421 7 ай бұрын

Nice work 👍🏼

@misterpatina 7 ай бұрын

Thanks!

@Danandvikki1 7 ай бұрын

I love your work!!!

@misterpatina 7 ай бұрын

Thanks! 🙂

@ScottDBarrett 7 ай бұрын

Well done

@misterpatina 7 ай бұрын

Thanks!

@mohammedkharem 7 ай бұрын

Amazing work as always

@misterpatina 7 ай бұрын

Thanks!

@quartzlierquartzlier 7 ай бұрын

Cool 🎲🎲🎲🎲🎲👏👏👏👏👏 Like 👍👍👍👍👍

@user-gw7km6tq9y 7 ай бұрын

That's great! He has good taste and clearly proves his high technical ability.

@misterpatina 7 ай бұрын

Thank you so much!

@Drankoii 7 ай бұрын

That's so cool! Amazing.

@misterpatina 7 ай бұрын

Thanks!

@nyernga 7 ай бұрын

Mister Patina never fails and never lets me down.......therapy for the soul

@misterpatina 7 ай бұрын

You’re welcome!

@plumtree7973 7 ай бұрын

Awesome.... love your tools as well ‼️

@misterpatina 7 ай бұрын

Thanks! Iam glad you enjoyed!

@shawnstamp1635 7 ай бұрын

Super sweet

@CoolAgainRestoration 7 ай бұрын

I love it 😍 great project Kai 👍

@misterpatina 7 ай бұрын

Thanks a lot! Iam glad you enjoyed 🙂

@ajipo 7 ай бұрын

Great job!

@misterpatina 7 ай бұрын

Thanks!

@franksando635 7 ай бұрын

Super cool 👍🏆

@matthewalexander2436 7 ай бұрын

As a superrealist oil painter, I really do appreciate perfection and attention to the tiniest detail. Your work is exquisite bro. You got quite a pair of hands on you sir. Well, well done... And please keep em comin! ❤💪❤

@misterpatina 7 ай бұрын

Thank you so much! I really appreciate the feedback of an expert 🙂

@Crazyclay78YT 2 ай бұрын

i dont think ive ever heard exquisite and bro in the same sentence before lmfao

@vinceianni4026 7 ай бұрын

Hello mister Patina beautifully done

@misterpatina 7 ай бұрын

Thanks Vince! :-)

@spaceden 7 ай бұрын

Magnifique 👌

@MrNizamusa 7 ай бұрын

Right tools right people' The result is perfect job,

@misterpatina 7 ай бұрын

Thank you so much!

@The_HillPeople 7 ай бұрын

"sup" LOL Very nice job!

@misterpatina 7 ай бұрын

Thanks! 😅

@tarts9767 4 ай бұрын

Well spent 14 min. THANK YOU ! 👍👍👍🙂

@misterpatina 4 ай бұрын

Thanks for watching! 🙂

@mark2tech 7 ай бұрын

Work of art

@Lewellfouch 7 ай бұрын

Wow beautiful work!

@misterpatina 7 ай бұрын

Thanks!

@a.p.a.woodmetal3412 7 ай бұрын

Brilliant work, excellent result 👌👍👍👍

@misterpatina 7 ай бұрын

Thanks!

@ratroddiesels1981 7 ай бұрын

that is a beautiful piece of art work suitable for any museum.

@airwolf1 7 ай бұрын

magnifique, bravo

@bernardjoly7248 7 ай бұрын

Magnifique réalisation

@n01celticfan18 7 ай бұрын

TURNED OUT WELL LUCKY DICE

@jamesniess2485 7 ай бұрын

🤯👍👏👏👏you are amazing the work you do is amazing 👏 👍🇺🇲

@misterpatina 7 ай бұрын

Thank you so much!

@SkillfulMan 7 ай бұрын

Nice work

@Dirk_Mcgurk 7 ай бұрын

wow! looks amazing 👏

@misterpatina 7 ай бұрын

Thanks!

@dougieranger 7 ай бұрын

That is absolutely beautiful.

@misterpatina 7 ай бұрын

Thanks!

@pascaldespinois9722 7 ай бұрын

Super idée d’usiner un dé en acier et laiton imbriqués. Ce dé est splendide !!! 👍👍👍

@misterpatina 7 ай бұрын

Merci! Je suis content que tu l'aimes :-)

@petercozzaglio6070 7 ай бұрын

I really love the ” PATINA “ of the finished dice

@claudiaramos3840 7 ай бұрын

I liked that steel cube, very unique.

@vanpenguin22 7 ай бұрын

I love polished metals as it is but the contrast between the steel and the brass is just stunning. Now i want a pair of those. But with copper inlays.

@RustyDockLight 7 ай бұрын

The two metals and surface finish are beautiful!

@misterpatina 7 ай бұрын

Thanks! Iam glad you like it! 👍

@brachinusGT 2 күн бұрын

The hole for 1 should have been bigger than all the others, the holes for 6 the smallest. To have a near perfect dice you want to remove the same volume = mass from every side. This dice will fall on the 6 more often, because the side with the 1 is heavier than every other side. Don't get me wrong, I love to watch your work, I really enjoy it. Keep going!

@user-wl3wy4wv9c 7 ай бұрын

Мастер!!!Молодец!!!

@misterpatina 7 ай бұрын

Spasibo!

@Godric_71 2 ай бұрын

A full set of Dungen & Dragon dice would be awesome.

@dixonqwerty 7 ай бұрын

Looks amazing!

@misterpatina 7 ай бұрын

Thanks!

@moomae1 7 ай бұрын

That's a piece of art! Well done

@misterpatina 7 ай бұрын

Thank you so much!

@JoriDiculous 7 ай бұрын

Nice and shiny. I really like brass, looks so good when buffed

@chrissyjay100 7 ай бұрын

Amazing skills, including the video editing 👍🏼

@misterpatina 7 ай бұрын

Thank you so much, glad you enjoyed!

@masby.gaming 7 ай бұрын

what a beauty of a dice! very satisfying!

@misterpatina 7 ай бұрын

Thanks a lot my bronaldo ❤️

@tcjnr82 7 ай бұрын

That pressing tool is a great idea. I'll be making one of those 😊

@connavargt6068 7 ай бұрын

That is awesome! Now please make a D20!

@misterpatina 7 ай бұрын

Funny, right in the moment iam searching for inspiration/images of a d20 😅

@RapNu 7 ай бұрын

Nice work MP🙂

@joshuaortiz5204 6 ай бұрын

I love these little items made from steel like the eightball I saw on another channel. They come out looking great.

@mr.garden7626 3 ай бұрын

Надо было отверстия просверлить чуть крупнее и и вставить туда деревянные прутки черный дуб или ещё какой нибудь ценной породы дерева. Было бы ещё лучше. Поставьте лайки что бы он увидел.

@user-wj2qj1sq3k 3 ай бұрын

Или сталь

@mr.e574 7 ай бұрын

I love and respect that you gave respect and love to "my mechanics/cool again restorations" No one knows it all Nonetheless.. Perfect, amazing work

@misterpatina 7 ай бұрын

Respect is the thing 👌

@frankturner9791 6 ай бұрын

That was so cool to watch I need a mill and a lathe

@Sharkdisplay 7 ай бұрын

Good work, u should change the thambnail and show the beauty of that dice of video 📸

@npfrestoration 7 ай бұрын

отличная работа

@misterpatina 7 ай бұрын

spasibo!

@CoolIdeasDIY-qv1nz 7 ай бұрын

Great job, colleague👍👍👍

@misterpatina 7 ай бұрын

Thanks buddy!

@Godric_71 2 ай бұрын

The precision of these machines can not be overstated.

@SethKotta 7 ай бұрын

Nice! Looking forward to all the other die types

@Giuliano3722 4 ай бұрын

Complimenti per il lavoro👏

@katesterner 7 ай бұрын

very pretty!

@misterpatina 7 ай бұрын

Thanks Kate!

@ScrapRushUK 2 ай бұрын

Simply amazing, you must have the patience of a saint making things like this.

@7.62x39Boogaloo 7 ай бұрын

WHY YOU NO ROLL!!? Dice have only one job!

@Chevymacjr 7 ай бұрын

Amazing as always! Excellent work!

@weedwacker1716 7 ай бұрын

That is pretty cool. Now you need to make one out of brass with steel inserts to have a pair.

@misterpatina 7 ай бұрын

What a nice idea! 🫢

@freshcoastdrifttracks6074 7 ай бұрын

I was going to suggust inserting copper or steel into the divits before drilling. But this is also cool!

@kanal_Zhizn_Invalida 7 ай бұрын

Моё почтение за видосик. Жду каждый с нетерпением. Я и сам являюсь автором, люблю ваши видео! Снимаю про быт свой, простого парня инвалида детства, своих зверят, и свой дом. Сложно мене даётся контент, стараюсь ровняюсь на вас!

@misterpatina 7 ай бұрын

Спасибо брат! Я желаю тебе всего хорошего!

@kanal_Zhizn_Invalida 7 ай бұрын

Обнял@@misterpatina

@Foxianna24 7 ай бұрын

Beautiful

@dougidoug 7 ай бұрын

It is a wonders work of art. You have an amazing talent for creating stuff

@misterpatina 7 ай бұрын

Thank you so much!

@maxim_izhevsk 7 ай бұрын

Спасибо за работу, отличная игральная кость вышла! 😊

@misterpatina 7 ай бұрын

Spasibo!

@user-pi8xt2kr2u 7 ай бұрын

Imagine that you are in a casino and a fight occurs near you. The fighters throw steel dice at each other instead of bullets and chairs 😂

@misterpatina 7 ай бұрын

I instantly thought of „matrix“ when neo dodges the bullets in slow mo 😅😅

@user-pi8xt2kr2u 7 ай бұрын

@@misterpatina 😂😂

@Texno_Login 7 ай бұрын

Старания человека достойны уважения. Но можно было время потратить на что то более стоящее

@grumpyone5963 5 ай бұрын

Awesome job and with great focused shots of everything. Loved it.🇬🇧

@ionvasile1533 7 ай бұрын

Ciulo ciulo ben trabajo👍💪👏👏🤚

@anthonyshiels9273 7 ай бұрын

my mechanics made an 8 ball from steel and brass. He said that the ball would be affected by the different densities of the materials used.

@BabaG 7 ай бұрын

a loaded dice.. nice :)

@bobsbillets 7 ай бұрын

Clear coat it so it stays shiny and doesnt rust!

@Vickie-Bligh 7 ай бұрын

Really well done, great filming, Mr. P.

@misterpatina 7 ай бұрын

Thanks a lot Vickie! :-)

@Alex_science 7 ай бұрын

Very nice!

@jerrylitchfield4111 7 ай бұрын

Oh man! That dice is beautiful! Much better than any bought in the store. Very well done!

@misterpatina 7 ай бұрын

Hey Jerry, thank you so much!

@jerrylitchfield4111 7 ай бұрын

You're so welcome!

@jerrylitchfield4111 7 ай бұрын

You're so welcome

@NapierNimbus 7 ай бұрын

Fabulous, great coverage. Awesome machining and measuring for the placement of the dots just amazing. Excellent final finish.

@misterpatina 7 ай бұрын

Thanks, iam glad you enjoyed!

@HogartTheRogue 7 ай бұрын

awesome! how about full set from d4 to d20?:)

@misterpatina 7 ай бұрын

Haha, that would be my 2024 project 😅

@HogartTheRogue 7 ай бұрын

@@misterpatina this made me realize that we, viewers, do not fully understand and appreciate the time required to make something like this. Partly because you make it look... well, not easy, it's obv a hard work, but kinda quick, in-between thing.

@misterpatina 7 ай бұрын

@@HogartTheRogueyou’re right. Making this piece was around 2 weeks. I made a prototype at first to check out which tools/adapters/settings are necessary. After that I could make the 'real' die. But it’s real fun 🙂

@HogartTheRogue 7 ай бұрын

@@misterpatina oh, it shows through your videos that you like this work and are having fun:)

@g40will 23 күн бұрын

Beautiful.

@stevenbrown8857 7 ай бұрын

That is a real object of beauty. I don't have the knowledge or skill to make something like that but I am in awe of those who do.

@misterpatina 7 ай бұрын

Thanks, iam glad you like it!

@garymclay9885 4 ай бұрын

That is so cool. Good job man

@misterpatina 4 ай бұрын

Thanks a lot!

@r9eaper 7 ай бұрын

That's one beautiful Dice!! Great job mate! 👍

@misterpatina 7 ай бұрын

Thanks mate!

@komo128 7 ай бұрын

Love watching these, very cool! Keep up the great work!

@misterpatina 7 ай бұрын

Thanks, I will! 🙂

@user-pi8xt2kr2u 7 ай бұрын

When I was a child, I used to make professional dice without stone tools. I would sculpt them accurately, make them square in shape, and put numbers on them. It took some time.

@jon7371 7 ай бұрын

Love this. I'm wondering what a full set of dice ranging from d-4 to a d-20 for us nerds would look like in this style. If you need a challenge that is.

@misterpatina 7 ай бұрын

I could use 2024 for this project 😅

@bradencutter 7 ай бұрын

a d20 would be siick. id use it for my magic games

@iimditton 7 ай бұрын

if you choke up on that boring bar it will be much more rigid and give you much cleaner cuts because of less chatter. It will also increase the lifespan of your tooling. Awesome work! Would you consider doing a video where you cover the actual polishing process? Your steps on how you go about getting a nice polish or what you may use?

@misterpatina 7 ай бұрын

Thanks! Oh, I just sand to ~2000 grit, after that i polish with white and blue compound. Nothing special.