Miter joint worktops cutting out sink and hob ,extractor hanged
Пікірлер: 62
@davidcooper14433 ай бұрын
You all pay attention, this man is a master of his trade. I’ve been doing this work for over 40 years and would be honored to become his apprentice for a month, and guaranteed to learn a 100 new things!
@CAVjoinery3 ай бұрын
Hey DAVE thanks a lot for your kind words means a lot to me coming from you as an experienced professional thanks so much !
@davidcooper14433 ай бұрын
Only speak the truth my friend, keep up the good work and the good Lord will reward you for it!
@GrahamG-rm4jxАй бұрын
Totally agree. Another great video 👍🏽
@user-rh7kw9dx9u7 ай бұрын
Είσαι φοβερός τεχνίτης τοποθέτηση.Κάθε φορά χαίρομαι πού Σέ βλέπω νά εργάζεσαι.Είμαι συνάδελφος σου στή Ρόδο νησί τής Ελλάδας
@CAVjoinery7 ай бұрын
Thanks sir for watching my work really appreciate it
@vladanstefanovic6 ай бұрын
I am really enjoying watching your videos. Great work!
@CAVjoinery6 ай бұрын
Thanks so so much !
@michaelhannard734210 ай бұрын
Great video I noticed that when you cut the chimney down on the cooker hood you used like tin snip device we used to cut them down with a jigsaw and metal jigsaw blade but now cut them with a grinder and the appropriate blade we hide the parts that get blued by the heat but too be honest it’s very minimal and on the plus side it cuts one side in about 10 seconds much quicker and easier and just as efficient
@CAVjoinery10 ай бұрын
I know but im so scared to use a grinder as my brother has gotten by the flying blade and jig saw is too rough and flammable thanks for your thoughts
@fishbone45199 ай бұрын
You look like Ryan Giggs, ex Manchester United midfielder. Enjoy your videos. Great work.
@CAVjoinery9 ай бұрын
You think so?🤣🤣I just looked on internet and I don’t think so 😅
@rustameffendy19729 ай бұрын
@@CAVjoinery i retired from part time carpentry due to slipped disc. I had been doing carpentry for 30 years. I have watched your videos repeatedly, everyday. Enjoy every bit.... all the best to you. By the way, those chipboards are very heavy. be careful when lifting the modules. I used blockboards and laminates for my projects.
@salimabenhalima26356 ай бұрын
عمل رائع واصل المزيد من النجاح والتألق ❤
@CAVjoinery6 ай бұрын
I will thanks so much for watching thsi !
@dilligaf238610 ай бұрын
I noticed you screwed the bottom cupboard molding from the bottom and not into the moldings from inside the cupboard is that the best way the fix them. Great video's fella.
@CAVjoinery10 ай бұрын
Yeah when possible i do so no screws being seen,thanks
@alisohailsohail39697 ай бұрын
Nice work sir thank you
@CAVjoinery7 ай бұрын
Most welcome
@miguelcallepena15359 ай бұрын
Excelente trabajo 👍 De que material es la mesada? Y cual es su espesor?
@CAVjoinery9 ай бұрын
Thank you for watching, worktop is laminated chipboard 38mm thick
@stevenshaw97129 ай бұрын
Hi CAV, incredible installation work! Just awesome! I spent 30 years in engineering, I see all your tools and know the brand. What brand of cabinetry are you installing? Thank you greatly for sharing the videos and info.
@CAVjoinery9 ай бұрын
Thank you home design hq kitchens
@stevenshaw97129 ай бұрын
@@CAVjoinery Thank you and keep up the hard work. I just wished that you could have installed all my projects over the past 7 years on three big properties. Cheers and I’ll be watching!
@Rikmayall2007 ай бұрын
Great fitter , what’s the sealant you use for the joints on worktops and cutouts , do you colour code for different worktops , cheers
@CAVjoinery7 ай бұрын
Thanks .i use egger sealant adhesive it came with the worktop
@HarveyJohnWillmott8 ай бұрын
Lovely job. What is that little festool table that you put your circular saw into called? I’ve never seen that before.
@CAVjoinery8 ай бұрын
Scs 55 table saw
@jamesccart7 ай бұрын
please what was the purpouse of marking the worktop 3times with the router on the scribe joint was that to position your worktop bolts ? and how come you cut the male section in one pass of the router ?
@CAVjoinery7 ай бұрын
Hey there were 3 pasess but did not filmed all on both male and female joints ,from front 100 mid 300 and at the back 480 to be able to tighten the back as well as the cabinet back panel is in the way thanks
@nicklyons-killey191710 ай бұрын
What fixings did you use for drywall?
@CAVjoinery10 ай бұрын
Hey I use RAWL setting tool and anchors
@nickbridgman670110 ай бұрын
Hi great job , what is the joint in compound on your worktops.
@CAVjoinery10 ай бұрын
Hi on the jig 135 Thanks for watching
@thomassampson35178 ай бұрын
Hi is the dust extraction good on this router? Been looking at getting it for a while as my makita one throws dust everywhere
@CAVjoinery8 ай бұрын
It is although has to do with using empty dust bags and the technique of routing Thanks
@akamarudesign741210 ай бұрын
Hi what material are you using for the countertop?, it looks like plywood, but like plastic, but like marble, please where I can get that?
@CAVjoinery10 ай бұрын
It laminated chipboard and splash backsplash are compressed laminate MDF thanks for watching
@tanhussain40539 ай бұрын
Excellent work. I love watching your work, exceptional fitting. What is the tool you use at 4:33 for 'shooting' screws into the wall please?
@CAVjoinery9 ай бұрын
It’s called rawl tool here ins my amazon link www.amazon.co.uk/shop/cavjoinery
@tanhussain40539 ай бұрын
@@CAVjoinery thank you
@user-ev9gs2ek9l8 ай бұрын
😢мороз ТТГ ТТГ ТТГ ТТГ то тд БД БД ИТ ошолльором рож ид ми ми СИ чит сб сб сб сб сб..... Сб сб сб сб мб со со аш кеш кеш под титанического мят ИТ ИТ ИТ тттть
@neilhowarth936210 ай бұрын
Do you not fix the units to the wall
@CAVjoinery10 ай бұрын
They are
@tomasrdms270711 ай бұрын
Hi. Have a older model of wall detector, totally crap. Newer model any good? Thanks
@CAVjoinery11 ай бұрын
I have used it for 4 years and im happy with it
@TheSicosi11 ай бұрын
What make is it please
@CAVjoinery10 ай бұрын
@@TheSicosi have a look here 👉amzn.to/3QJio1h
@borissblinov118110 ай бұрын
👌👌🔥🔥🔥🔥
@CAVjoinery10 ай бұрын
Thanks 🙏
@farouklounissa234311 ай бұрын
Bonjour peut tu nous faire une vidéo sur tout ton matériel merci
@CAVjoinery11 ай бұрын
English please thank you 🙏
@Martin_Ptacek6 ай бұрын
What is that glue and spray?
@CAVjoinery6 ай бұрын
Here is amazon link it is actually CA glue and accelerator amzn.to/3S8HW8a
@Martin_Ptacek6 ай бұрын
@@CAVjoinery thanks a lot.
@borislazarenko920410 ай бұрын
Small, green appliance.What is it?
@CAVjoinery10 ай бұрын
Is called margin marker you can hav alook on my amazon link www.amazon.co.uk/shop/cavjoinery
@LexaSc8 ай бұрын
Вы используете жидкость-спрей при склеивании листового материала. Что за спрей?
@natekelsch32517 ай бұрын
I don’t know if you’d be interested, but you should post some tip videos. I learn a lot from your vids but fast forward is too hard to watch sometimes haha
@CAVjoinery7 ай бұрын
Sorry they are shorts video and they have to be under 1 min and i am so glad to hear that you like my content. Thanks for sharing
@farouklounissa234310 ай бұрын
hello can you make us a video on all your equipment and its features thank you
@CAVjoinery10 ай бұрын
I rather don’t as people will think I’m showing off and get a lot of hate but I consider it after doing o bit of research thank you