Miter Saw Station with Storage

Рет қаралды 218,864

Күн бұрын

📽️ WHAT TO WATCH NEXT
Organize Any Shop - • 11 Simple Ways to Orga...
My Secrets for Cabinet Building - • 10 Tips and Tools for ...
How to Build Upper Cabinets - • How to Build Wall Cabi...
How to Build Base Cabinets - • How to Build Cabinets
✅️ GET THE PROJECT PLANS
Miter Saw Station: mwawoodworks.com/product/mite...
Build My Shop Plan Bundle (Save 50%) - mwawoodworks.com/product/the-...
The Whole Enchilada Plan Bundle (Save 65%) - mwawoodworks.com/product/the-...
✅️ TOOLS AND SUPPLIES IN THIS VIDEO
Amana Countersink Drill Bit - amzn.to/3CKp6tL
Centipede Work Holder - bit.ly/bora-centipede
True Position Tools Cabinet Hardware Jig - amzn.to/3g3pgDr
Spectape Two Sided Tape - amzn.to/3wleKh4
Kreg Shelf Pin Jig - amzn.to/2UiK8Pj
Kreg Concealed Hinge Jig - amzn.to/3yNN9X5
Kreg Pocket Hole Jig - amzn.to/2UgpEGU
Mag Switch - amzn.to/3sg6M7H
Bessey One Handed Clamps - amzn.to/2VWftbp
Plywood Router Bit Set - amzn.to/3sj7lxn
Speed Square - amzn.to/3xHGwEl
Fast Setting Wood Glue - amzn.to/2VNIaaF
Paste Wax (for screws) - amzn.to/3AOd41r
Self Centering Drill Bit - amzn.to/3yNNpFx
✅️ LIST OF THE TOOLS I USE IN MY SHOP - bit.ly/tools-i-use
*Disclaimer - As an Amazon Associate I earn from qualifying purchases
✅️ HOW TO SUPPORT MY CHANNEL
Get Project Plans: bit.ly/download-project-plans
Visit My Website: mwawoodworks.com
SUBSCRIBE : kzfaq.info?...
✅️ MWA WOODWORKS ON SOCIAL
Instagram: / mwawoodworks
Facebook: mwawoodworks
Pinterest: / mwawoodworks
---------------------------------------------------------------------------------------------------------------------------------------------
Miter Saw Station with Storage
In this video I'll show you from start to finish how to build your own cabinets including cabinet carcass, making face frames and building cabinet drawers and building cabinet doors!
⏱️ Chapters
00:00 Intro
00:48 Installing Base Cabinets
01:36 Making Counter Tops
05:13 Installing T Track
06:16 Saw Platform
07:13 Upper Cabinets
09:04 Stop Block
10:28 Pull Out Trays
12:08 Fastener Storage
12:36 Saw Blade Organizer
#cabinets#mitersaw#woodworking

Пікірлер: 166

@TheRealMikeD Ай бұрын

I have been thinking of making exactly this project. This video, along with your bottom cabinet video is going to be my guide for building it. Thank you!

@SolaGratiaWoodworks 3 ай бұрын

Working on reorganizing my garage workshop. I'm really liking your miter station and wall cabinets. I think these are definitely going to be useful for me. Thanks so much for posting these.

@terristroh3965 2 жыл бұрын

I have a couple dozen food storage containers labeled and ready too. I even have some of those in a larger shoe bin if they are project hardware etc. You did a great job. And you weren’t kidding about your platform drawers needing to be able to hold weight! Whooweee!

@robertkeeble1854 2 жыл бұрын

Great job making the description of everything you’re doing clear and concise. Super video.

@woodandwheelz 2 жыл бұрын

This is great. It also made me rethink my RAS Miter saw station. 1 - It made me realize I don't need it as long as I was originally thinking. 2 - It also reminds me that I could never afford that plywood, but I can still make it work. I always end up building my shop tables and such out of 2x4's. However, I love watching others build these amazing pieces of shop furniture. Just because mine won't be as fancy, I still learn what to add or take away from my design to maximize functionality. Thank you again for another great video.

@TheBestofBothWorlds28 3 ай бұрын

Currently doing a full renovation to our shop and I'm definitely copying and modifying that blade drawer idea 💡 brilliant brother 👏😎

@MrPatdeeee 2 жыл бұрын

"Absolutely Brilliant!" You are truly a "CUT above!".

@MWAWoodworks 2 жыл бұрын

🤣🤣🤣 thanks!

@martymitchell9855 2 жыл бұрын

THIS is my dream miter station! Yours look so clean and very well thought out. Thanks for the inspiration! 😊👍

@strictpress5070 2 жыл бұрын

I'M LOVING THE THUMBNAIL IMAGES LATELY MAN!!!! SIMPLE AND EASY BUT I FIND THAT TO STICK OUT BETTER NOW THEN CRAZY BUSY THUMBNAILS!!!

@MWAWoodworks 2 жыл бұрын

Well thanks!

@makermark67 2 жыл бұрын

Great work. In the midst of building a miter saw station as well and these are some great ideas. Thanks for sharing!

@MWAWoodworks 2 жыл бұрын

Awesome! Glad I can help 😃

@davidcole333 Жыл бұрын

That was exemplary...well planned, well built and well installed. Hoping you get years of enjoyment out of it. Also...thanks for leaving in the router accident, we've all had our little mishaps that cause us to curse and throw things...you handled it very well considering the time and money you're into this project.

@kurtopalka5201 2 жыл бұрын

This is very clean and functional. I love it! Great work!

@chrisbroome 2 жыл бұрын

"These are cheap. AND they're snackable." That got me. 😆

@MWAWoodworks 2 жыл бұрын

STACKABLE, not snack able 🤣🤣🤣 although they are probably pretty snackable

@kevincale1366 2 жыл бұрын

Awesome work, well done.

@SpencleyDesignCo 2 жыл бұрын

Killer job, Matt! This setup is sick!

@MWAWoodworks 2 жыл бұрын

Thank you brother 🙌

@nigelwarner1497 2 жыл бұрын

This is so helpful, I’m about to build a mitre station and have done that ‘overthinking’ thing to the point I don’t know where to start- but this …has inspired me to crack on…many tks

@fdort3971 4 ай бұрын

Thanks @MWAWoodworks...wish I had your shop...still working outside in the freezing cold

@maxeffort4984 2 жыл бұрын

Thanks for the video, especially the mistake. Perfect demos make the rest of us feel like screwups. Glad to know you're one of us! :)

@craigesmith4835 2 жыл бұрын

Those little snack cups are a great storage option!

@goddessofthestars 10 ай бұрын

Wow this was a great video! Definitely inspiring, can't wait to build some of these features into my shop 😍

@Novoboats 2 жыл бұрын

Easy to follow, looks great.

@731Woodworks 2 жыл бұрын

Great job. Love all the organization!

@MWAWoodworks 2 жыл бұрын

Yeah brother, it's a game changer 👍

@BrenQ99 2 ай бұрын

Spectacular job!

@felixfromnebraska8648 2 жыл бұрын

Well thought out and executed. I love the way they came out. Thanks for sharing. Felix

@MWAWoodworks 2 жыл бұрын

Thank you for the kind words 🙂

@LateNightHomework Ай бұрын

Great build!

@MWAWoodworks Ай бұрын

Thanks! And I love that name Late Night Homework! 😁

@philhode5104 2 жыл бұрын

I'm coping this, just finishing 40ftx12ft workshop,can't wait

@MWAWoodworks 2 жыл бұрын

I have plans if you need them mwawoodworks.com

@donnymcarter 2 жыл бұрын

You truly have some of the best videos out there buddy! Always top notch!

@MWAWoodworks 2 жыл бұрын

Awwww man, you're making me blush ☺️ I hope all is well with you brother!

@diyblueprintdiva Жыл бұрын

I had an idea to add the wood stop in my the counterTop because of space and knew someone had to have one and found your video. I watched this on TV but I had to come leave a comment because I received so many other solutions and ideas for different projects I have going on. You showcased so much in this one video and as a new DIYer, it’s Gold! Thank you!

@MWAWoodworks Жыл бұрын

Wow thanks for the kind words!

@christianhelms6676 Жыл бұрын

Got some major "fix this build that" vibes from this build.

@truthserum5202 2 жыл бұрын

Nicely done!

@PeterFreese 8 ай бұрын

I was building a new router table this weekend, and I was nearly done and routing out the inset for the router plate in a really-sweet looking laminated top. I was using a plunge router base, and after I was done, I hit the lever to un-plunge the router and I set the router down on the table as it was still spinning down. Unfortunately, the router didn't completely retract and when I put the router down it made a huge gouge in my nice new laminated top. My first thought was about quitting woodworking and getting a new hobby, but then I thought of the moment at 5:33 where you set the spinning router down on your miter saw station top, and I recalled someone saying the real skill in woodworking is learning to fix or hide your mistakes. I've decided to relocate where I'm putting the miter/t-track on the router table so I can remove the damage with a dado. In the end, no one will know except me, unless they ask about the positioning of the miter track...

@MWAWoodworks 8 ай бұрын

Sounds like a good plan!

@rushja Жыл бұрын

This is awesome! I've gotta do this now

@bradleylajoie7152 Жыл бұрын

Your channel rules man! Keep up the amazing work!

@bryoncovell6325 Жыл бұрын

Love the build. Thanks for sharing.

@MWAWoodworks Жыл бұрын

Thanks for watching!

@stingk5295 10 ай бұрын

Awesome Job!~

@loveloveiloveuforever7247 Жыл бұрын

*Bought a few months backs **MyBest.Tools** used to cut some 2x4s to make a hanging swing. Cuts were precise and quick.*

@_ErIc1976 2 жыл бұрын

Nice job buddy

@seanbrotherton542 2 жыл бұрын

Nice job man! Always feels good to have some sweet new shop furniture.

@MWAWoodworks 2 жыл бұрын

Fo sho

@rksmith5273 2 жыл бұрын

This was really good. You have earned another subscriber.

@arth.4196 2 жыл бұрын

Great Job 👍

@MWAWoodworks 2 жыл бұрын

Gracias

@mattbowers5342 2 жыл бұрын

Looks great, definitely a few ideas to steal here!

@MWAWoodworks 2 жыл бұрын

Great 😃

@TaylorHubbell 2 жыл бұрын

Gauge looks like a perfect spot for a little logo medallion insert :)

@MWAWoodworks 2 жыл бұрын

You know it! 😂😂😂

@Voltechs Жыл бұрын

It looks so good. I need more time in the day so I can take this project on!

@MWAWoodworks Жыл бұрын

It took me a while to finish it all!

@zachphirman6219 3 ай бұрын

If you strip a TapCon, you can drive a piece of shim in the hole, and it will hold tight if the threads are fresh.

@alanr745 2 жыл бұрын

Good build process and explanation. A simply solution I used when I screwed up (the underside) of a butcher block countertop like you did: Look at the gouge, think of a neat design that you could route/chisel yourself, then route/chisel your desired design/shape, fill with tinted epoxy, sand, finish, be happy. :D

@MWAWoodworks 2 жыл бұрын

Yeah! I think what I'm going to do is inlay a logo medallion

@gordonshute8816 2 жыл бұрын

Congrats on 100K. Great job and keep up the awesome projects

@MWAWoodworks 2 жыл бұрын

Thank you ,Gordon!

@rmyukon 2 жыл бұрын

12:09 - That's exactly what my fastener drawer looks like!

@AngieWilliamsDesigns Жыл бұрын

Yep. I think this is the route I want to go. I have an old miter station that I build from Ana white plans about 7 years ago. Time to upgrade it. It’s too high. And I never finished out the underneath storage. I think this would work perfect.

@markkaes3144 2 жыл бұрын

I am currently building mine - what timing! Nice job and thanks for the ideas 💡

@MWAWoodworks 2 жыл бұрын

Great minds 🙂

@MCsCreations 2 жыл бұрын

Fantastic work, Matt! Really well done! 😃 For my shop I built just a miter kart... You know? With wheels and wings... Because I don't have much space, unfortunately. But it works great for me. 😊 Anyway, stay safe there with your family! 🖖😊

@MWAWoodworks 2 жыл бұрын

That's what I had before I built this! It was great for my old garage shop. 😃

@MCsCreations 2 жыл бұрын

@@MWAWoodworks I bet! My space is around the size of an one car garage, I guess. So it's perfect. 😊

@rudyswoodwork7236 2 жыл бұрын

Good job bro ..

@MWAWoodworks 2 жыл бұрын

Thanks 👍

@sekiwiorydziury1457 2 жыл бұрын

Good job :)

@Free76Thinker 2 жыл бұрын

I just discovered your channel and it's my new favorite wood working channel. And because knowledge is power and you have taught me a lot already, I figured I'd share a useful tip with you: If you do happen to strip out your Tapcon holes, you can easily fix it, and you honestly dob't need a Tapcon screw to do it, you can even use wood screws, even for mounting/attaching things to a cinder or cement wall. Just keep some strands of jacketed wire of various gauges in your tool arsenal and when this happens again, just shove a length of wire in the hole that gives the screw something to bite to. Works great! I can't take this credit though, I learned it from Next Level Carpentry's channel. If you're not aware of his channel, check it out, he's a wealth of great knowledge.

@MWAWoodworks 2 жыл бұрын

Thank you for the great tip!

@Free76Thinker 2 жыл бұрын

@@MWAWoodworks no problem.

@brennanmoran7990 Жыл бұрын

I have been picking away at building 2 6 foot sections of workbench in my garage based on your design here, and made a similar mistake to your gouge in the top. I was using the flush trim bit to make it flat, and the little wheel at the top of the bit just... came off. And I took a gouge out of the top. At least it's on the side and I can point it to the back... damn it! haha

@MWAWoodworks Жыл бұрын

#mistakesweremade 🤣🤣

@steinbierz Жыл бұрын

Great video! What height are your left and right benches? I am trying to figure out how tall to build mine. Thanks.

@ddhrsa 2 жыл бұрын

Epic

@karenmitchell6814 2 жыл бұрын

Oh the hole! I knew what was going to happen as soon as you picked up the router from the dado. That would drive me 😜. What about routing it out and putting in a medallion with your logo? Very nice work station. 😀

@MWAWoodworks 2 жыл бұрын

Great idea!

@andrewbieger5004 2 жыл бұрын

@@MWAWoodworks Maybe rout out a recess in the area for a Band- Aid (covered with epoxy)?

@dgloo 2 жыл бұрын

Great video. Hi quality build and hi quality cam work and editing. Thanks. The cheap snack containers for nuts and bolts are a great idea. Three suggestions would be to (1) use square containers instead of round to maximize your space, (2) use color coded labels to group hardware of the same size, and (3) put the labels on tops of the containers (not the sides) so the labels are all visible when you open the drawer.

@MWAWoodworks 2 жыл бұрын

Good suggestions!

@FisherCatProductions 6 ай бұрын

Labels on top 👍

@outofmind9222 Жыл бұрын

T track is an interesting idea, I have extended fence pieces running straight w the mitre saw fence for longer lumber, and if I need a stopper I just clamp a block onto the fence extension. Good work brother

@MWAWoodworks Жыл бұрын

Yeah I gave up the long fences. Just need them at the saw. The t track gives you the stop measurement

@nicholasicon 2 ай бұрын

Love this setup. I bought the plans and im halfway through building when i realised my mitre saw wont fit. Its an ozito sliding mitre saw, and with the 600mm deep benchtop, i cant slide the mitre saw back and forth. It needs to basically sit off the bench to give enough room to slide back and forth. What do i do?

@Medickep Жыл бұрын

Put the labels on the top of the lids!!😂

@taffynz90 2 жыл бұрын

I've been watching quite a few of your videoa, especially on the cabinets you build. Fantastic videos? Question where do you get you cabinets handles from and brand? Oh and the drawer slides you use.

@MWAWoodworks 2 жыл бұрын

Cabinet pulls came from home depot. I bought the drawer slides in bulk from my local plywood warehouse.

@dukeengine1339 2 жыл бұрын

Keeping the bit protruding from the router and damaging the brand new working surface: happened to me as well as soon as I finished my router bench... 😄

@MWAWoodworks 2 жыл бұрын

Yup

@jonathanbolding4164 9 ай бұрын

what bit did you use for such a wide track?

@tlough1 Жыл бұрын

I like this set up. Better than having the mitersaw higher up and having to build platforms which wastes the counter space.

@MWAWoodworks Жыл бұрын

Yep

@tlough1 Жыл бұрын

@@MWAWoodworks bought your plans. Very nice

@brianillsley4376 Жыл бұрын

Hi, your skills are awesome, I am new to woodworking and need to make these stations as my workspace is very disorganised. i have a query about your plans for this, does it come with the plans to make the cabinets as well? and as a novice what station would you recommend to start with?

@MWAWoodworks Жыл бұрын

Yes the plans are for all the cabinets that make up my miter saw station!

@rw7532 2 жыл бұрын

Looks great. I finished mine early this fall. I did deep drawers on the lowers instead of cabinet doors with pull outs. Do you plan to move the outlet box this is right behind your miter saw? I thought that was the “mistake” that about “ruined” the project you referenced in the intro.

@MWAWoodworks 2 жыл бұрын

I do need to move the outlet up, but the mistake was making a huge gouge in my counter top 😜

@robertrys5099 2 жыл бұрын

@@MWAWoodworks install the logo - badge, of your channel (steel / brass - engraving) in the place where the counter top is damaged

@salvatoresalvio204 Жыл бұрын

OTTIMO LAVORO. COMPLIMENTI. SALUTI SALVIO

@stevenmasterson5871 Жыл бұрын

Matt, I have watched all your videos. They are extremely informative and well done!! I am about to build my miter saw station. 2 questions: 1) Why did you feel that the Incra T track with measuring tape wasn't adequate? I was going to purchase and I'm holding off. 2) I have a DeWalt 12" slider. How much more do you like the Festool 10" Kapex? Thanks and keep making great videos that help all of us!!

@MWAWoodworks Жыл бұрын

I did not like the incra measuring tape system and you can't insert any other brand tape into the slot. The kapex is great. I had a 12 inch slider but it won't work with cabinets against the wall so I switched.

@stevenmasterson5871 Жыл бұрын

@@MWAWoodworks Matt, Thank you for the quick response and great information. Continued success!!

@Hundo_Mo 2 жыл бұрын

7:08 Guess for unique adjustments it helps to… have an Ace up your sleeve 😎

@abelthesummit Жыл бұрын

How is that sled that you used made, is it an angle sled also??

@noahunderwood9991 2 жыл бұрын

Quick question. When installing the upper cabinets how tall is that spacer that you placed on the lower cabinets? Thanks.

@MWAWoodworks 2 жыл бұрын

I used 18 inches

@mikebuzz5784 11 ай бұрын

I didn't see in the video but did you route out a groove for the measuring tape on the table top or just stick it on?

@MWAWoodworks 11 ай бұрын

Just stuck it on

@MrLibertyordeath 2 жыл бұрын

My man is throwing around money like a mad man lol what with the plywood spacer thingy. Just kidding it looks great. nice work guy.

@MWAWoodworks 2 жыл бұрын

I'm plywood rich 🤣🤣🤣

@zachgoestoeuro 2 жыл бұрын

Is it possible to install this bench away from a wall - not secured to a wall like you’ve done? I want to build this, but it will be in the middle of the shop. Would not adhering to a wall for support cause structural issues for the bench top, saw weight, cabinet contents weight, etc?

@MWAWoodworks 2 жыл бұрын

Yeah they are free standing

@AndreRiopel 6 ай бұрын

I bought your plans and I have a Dewalt 780 mitre saw. Can the plans be modified for that saw?

@MWAWoodworks 6 ай бұрын

you would just have to make the cabinets much deeper or don't put them against the wall. That style of sliding miter saw doesn't play well against a wall.

@robertdaino3255 3 ай бұрын

What wood cleaner do you use ?

@MWAWoodworks 3 ай бұрын

Usually just mineral spirits is good

@chackett99 Жыл бұрын

How many sheets of plywood are required for this build?

@pitchblaq1368 2 жыл бұрын

If you stripe the hole you can is a piece of copper wire stick it in the hole and then screw the tapcon screw back in.

@prestonbain6670 12 күн бұрын

what t track is that

@mrmyblessednest1722 2 жыл бұрын

Do you have a link for that countersink bit you were using?

@MWAWoodworks 2 жыл бұрын

Just added the link to the video description 👍

@mrmyblessednest1722 2 жыл бұрын

@@MWAWoodworks awesome thanks!!

@deogloriawoodworks 2 жыл бұрын

What kind of mask are you using? I checked out your list of tools and such on your website, but the RZ mask listed doesn’t have the straps I see in this video. I use an RZ mask and honestly don’t like it…it always wants to slip down. Thanks!

@MWAWoodworks 2 жыл бұрын

The M2 has the velcro strap(I agree, not my favorite) the M2.5 has a pair of elastic straps 👍

@deogloriawoodworks 2 жыл бұрын

@@MWAWoodworks Awesome. Thanks!

@user-Derevenskiebubni 2 жыл бұрын

👍👍👍👍👍👍

@MWAWoodworks 2 жыл бұрын

🙌

@clydemoore1582 2 жыл бұрын

Epoxy between the plys.. super strong

@laneaverett2178 Жыл бұрын

Where did you get the t-track

@MWAWoodworks Жыл бұрын

I would recommend kreg t track. Get it on Amazon. I think there's a link in the description

@danielakerman8241 9 ай бұрын

It's gorgeous. Love the ideas. But I really don't understand miter saw stations that don't allow for a full swing of the miter saw blade. You just turned your Festool compound miter saw into a $1600 chop saw.

@MWAWoodworks 9 ай бұрын

I can rotate my saw 50 degrees in both directions. Which is complete range to the left. The right side goes to 60 degrees. I've owned the saw 2 years and never had a need to go beyond 50 degrees but all it would take to use that is to clip the corner of my counter top a few inches and problem solved. I just haven't done it because I haven't needed to.

@zachgoestoeuro Жыл бұрын

How is the “cleat” for the tray holding the saw created? Is this a “French cleat”?

@MWAWoodworks Жыл бұрын

It's just two pieces of scrap screwed together in an "L" shape and then screws to the side of the cabinet. No, not a French cleat.

@AudioTones67 Жыл бұрын

Playing cards eh?. Genius.

@jareda5597 2 жыл бұрын

What brand of t track is that? I didn’t see it linked in your description.

@MWAWoodworks 2 жыл бұрын

The t track I used is not ideal. I should have used standard t track which is what I put in the description 👍

@jareda5597 2 жыл бұрын

@@MWAWoodworks thanks! Great build btw. I just moved, and am in the process of designing my new miter saw station. Will definitely be using some of your ideas!!

@vickempA321XLR Жыл бұрын

What do you not like about the Incra track? I was planning on using myself. What did you discover that makes you think that?

@Cleatus25 2 жыл бұрын

What happened to the dewault miter saw? Too big in the back to make for a good miter station?

@MWAWoodworks 2 жыл бұрын

It was a back slider. Won't work

@pingpong9656 2 жыл бұрын

9:20 Is there not a high risk of kickback when cutting such small pieces between fence/blade?

@MWAWoodworks 2 жыл бұрын

Not with a riving knife installed

@ZaheerBaber53 11 ай бұрын

Can we get the drawing

@MWAWoodworks 11 ай бұрын

Mwawoodworks.com plans available for this and many other projects

@haroldhughes2097 2 жыл бұрын

I have similar drawer pulls. They catch on my pants and hammer loops EVERY time I walk past them. Need to spend $$$$ to replace them. Anyone else???

@bobziroll 9 ай бұрын

Your concern about the water in the glue warping your benchtop is well founded. I added too much glue to a layers MDF + plywood workbench top I made last year and the whole thing has cupped slightly upward and has no good flat surface now. Eventually I'm going to have to remake the whole thing, to the tune of a couple hundred dollars probably 🤦🏻‍♂

@brucelavis4934 Жыл бұрын

Nobody but nobody addresses the issue of shop dust covering the French cleat items. Cabinets with sliding doors will solve the problem. Use lexan for visibility. Your thoughts. Better yet build one and make the video!!!! Thx

@Adam-fj6ls 11 ай бұрын

You would sell a lot more plans if you sold them in metric too lol. I just went to buy them but I don't want to try to learn imperial and build at the same time lol.

@MWAWoodworks 11 ай бұрын

I don't have enough demand for metric and I would have to pay double the price to have my plans in both measurements. Not worth the cost yet. Sorry.

@Benakuzo2 10 ай бұрын

Superb quality throughout, easy to assemble. I found the saw to be highly accurate and a delight to use (I am a homeowner using this saw for various projects). I attached the saw to a folding mobile stand to save space and that works great kzfaq.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe as well. However, you have to be sure the saw is securely locking in position before collapsing the stand. I've had many of the brands over the years and have come to point where I only buy Bosch, the extra money is a small price to pay for the quality and ease of use. Treat yourself to the best.

@TinyWorkshop 2 жыл бұрын

You cannot use all the angles of the kapex...... not even 45°...

@MWAWoodworks 2 жыл бұрын

I can use 45 from both sides 👍

@christopherschuster8657 2 жыл бұрын

Why cut the height of the saw table just lower if you were gonna use cards to shim for the height difference? That makes absolutely no sense. Had you just made the height difference the exact amount you wouldn't have had to do that!

@MWAWoodworks 2 жыл бұрын

Because nothing ever works out exact.

@darthr01g41 2 жыл бұрын

Great video! Except for the annoying background "music" which adds nothing and wastes your time. It sounds like the neighbors are listening to awful "music" too loudly. Very annoying and amateurish! Other than that incredibly annoying thing, everything was GREAT!