Miter sled - A table saw accessory to make accurate 45 degree cuts - Step by step build
Рет қаралды 28,590
Күн бұрынThis project is a typical example of a tool I needed for another project. Like most shop projects, this took a while for me to actually make. Now that it's done I will get a lot of use out of it. The build process for this sled is inspired by William Ng's video: • 2 Cuts to a "Perfect" ...
If you want a step by tutorial on how to make this sled I would go check out his video, it's really insightful.
On my website, you can find details on this build and many others:
cornerfieldshop.com/?p=1084
I hope it's useful to you, if so please like the video and help me make more videos. If you want to support what I do, you can get my merchandise over here: shop.spreadshirt.nl/cornerfiel...
Follow me on Instagram for more footage from behind the scenes:
/ cornerfield_shop
Thanks for watching and hopefully I will see you again at my channel.
@kenjcm 2 жыл бұрын
This is probably the most complicated build I've seen so far on youtube, lol. Thanks for the video. 🙂
@CornerfieldShop 2 жыл бұрын
Glad you liked it! Thanks for the comment :-)
@WorkbenchWoodworking 4 жыл бұрын
Nice miter sled! I also like the floating frames that you make.
@CornerfieldShop 4 жыл бұрын
Thanks!
@unitwoodworking5403 4 жыл бұрын
👍👍Thanks for useful tips, detailed information and interesting video.
@CornerfieldShop 4 жыл бұрын
Thanks for the comment! You are very welcome 😄
@unitwoodworking5403 4 жыл бұрын
@@CornerfieldShop You're welcome. Take care.
@garagengio 4 жыл бұрын
Well done Rico. Hopefully with my cornerfield hoodie I am able to be that accurate like you are 😄
@CornerfieldShop 4 жыл бұрын
Well if you are not, at least you look good doing it 😎👌 Thanks again for your support Giovanni, I really appreciate it 👍
@garagengio 4 жыл бұрын
@@CornerfieldShop :D
@klinsmann87 4 жыл бұрын
what is the model of freud's saw that you have installed in your Dewalt? please type a model if it's not a problem. thanks in advance!
@CornerfieldShop 4 жыл бұрын
It's no problem. I have two blades from Freud. The one that is on now is used for cross cutting, the type is LP40M. The dimensions in my case are 250x30mmx60T. My other blade for ripping is also from Freud. It's called the LP20M. Dimensions of that blade are: 250 x 2.8 x 24T. Hope it helps!
@klinsmann87 4 жыл бұрын
@@CornerfieldShop thanks a lot
@Frenksel 4 жыл бұрын
Mooi project weer, Rico! Ben benieuwd waar je die geleiderails hebt gekocht!
@CornerfieldShop 4 жыл бұрын
Bedankt Frank! Ik heb ze van BangGood. Kon ze helaas nergens anders vinden. Was een tip van Dennis van Hooked on Wood.
@mathiasbruggeman8886 3 жыл бұрын
Ben je tevreden van deze rails?
@CornerfieldShop 3 жыл бұрын
Zeker, ze werken prima en blijven mooi stabiel ondanks het wisselende weer.
SALEM EPISODES
Рет қаралды 505 М.
CarpenTAK_DIY Woodworking
Рет қаралды 325 М.
Steve Ramsey - Woodworking for Mere Mortals
Рет қаралды 1,6 МЛН
CarpenTAK_DIY Woodworking
Рет қаралды 36 М.