Рет қаралды 33,449
ACI-211 METHOD : MIX DESIGN OF CONCRETE
#CivilPositive
#ACI-211
#METHOD
ACI METHOD HAND WRITTEN NOTES LINK:-
drive.google.c...
ACI METHOD PROCEDURE NOTES LINK:-
drive.google.c...
BIS METHOD VIDEO LINK GIVEN BELOW:-
:-CONCRET MIX DESIGN IS 10262-2009 M-35 Video Link:
• How To Do Concrete Mix...
_Concrete Mix Design hand Written Notes link:-
drive.google.c...
SPECIFIC GRAVITY OF CEMENT VIDEO LINK:-
• SPECIFIC GRAVITY OF CE...
LONG WALL SHORT WALL METHOD VIDEO LINK:-
• LONG WALL AND SHORT WA...
STAAD PRO V8I BUILDING DESIGN LINK:-
• Staad Pro Tutorials - ...
• Design of ( G+4 ) Mult...
#ACI METHOD OF #MIX DESIGN - Absolute volume method
#Introduction
--In 1991,the #American Concrete Institute(ACI) published guidaelines for normal, heavyweight and mass concrete mix design. -The absolute volume method of mix design as described by ACI committee 211 is presented.
#ACI Method Of #Concrete Mix Design
It has the advantages of simplicity that it:
Applies equally well with more or less identical procedure to rounded or angular aggregate.
To regular or light weight aggregates.
To air entrained or non-air-entrained
-ACI 211
A Properly Proportioned Concrete Mix Should Posses These Qualities.
Acceptable #Workability of Freshly Mixed Concrete
Durability, Strength and Uniform Appearance of the Hardened Concrete
Economy
DATA REQUIRED
Class of concrete to be designed.
#Fine aggregate:
#Specific gravity
#Fineness modulus
#Coarse aggregate:
#Maximum size aggregate
#Specific Gravity
#Unit Weight (dry rodded unit weight)
#From Code Specifications:
#Cement factor (minimum cement content).
#W/C ratio (maximum W/C ratio)
#Air content (mean air content).
#Nominal Maximum size of aggregate.
The standard ACI mix design procedure can be divided into 9 basic steps:
#Compressive #strength.
#Water #cement #ratio.
#Air content selection.
#Choice of #slump
#Water content selection.
#Cement content
#Coarse aggregate content.
#Fine aggregate content.
#Adjustments for aggregate moisture
#Dry Weights vs. Actual Weights
Batch weights calculated from volumes assume dry CA and dry FA.
Actual weight of CA and FA are NOT dry
Adjustment based on moisture contents for both CA and FA.
Correction for the water content is must.
#CONCLUSION
The mix proportions for the actual #materials to be used must be checked and adjusted by means of laboratory trials consisting of small batches.#Fresh concrete should be tested for slump, workability, unit weight and air content; specimens of hardened concrete cured under standard conditions should be tested for strength at the specified age.
If you have any problem in ACI METHOD COMMENT ON THIS VIDEO or need any help contact with me via *:-mdahedalam549@gmail.com":!