【MJNシステム】マイクロミスティングデモンストレーション

Рет қаралды 188,770

9 жыл бұрын

ヨシムラ独自の開発技術及び精密加工により生み出された「MJN（マルチプル・ジェット・ノズル」。キャブレター内でMJNノズルがガソリンを霧化させる様子をハイスピードカメラで捉えました。ヨシムラの技術をどうぞご覧ください。
詳しい製品情報はこちら！
ヨシムラジャパン：www.yoshimura-jp.com/
製品ページ：www.yoshimura-jp.com/products/...

Пікірлер: 21

@ddiabloll 6 жыл бұрын

Amazing engineering! Never give up on your dreams! I love the fuel atomization. i want to add a longer intake trumpet. this must have been on a 2-stroke or an engine with cylinder ports because the air seems to be pulsing.

@finophile 9 ай бұрын

amazing, thanks for posting

@2vs4strokerzone14 5 жыл бұрын

Nice 🔥🔥🔥🔥

@user-so2ni4os7k 3 жыл бұрын

通氣孔漏油這個是什麼原因如何解決啊？

@cdoublejj 6 жыл бұрын

what a beautiful carb

@OneBiker98 Жыл бұрын

This is a great carburetor, but why is fuel leaking from the left side?

@atulgokuyamaha7 5 жыл бұрын

What carburater mode is compatible for My Yamaha FZ 16 INDIA

@m_zbrv3967 5 жыл бұрын

As long as the intake manifold matches

@Akhilpoomala 4 жыл бұрын

Buy pulsar 180 carb

@taka15790 8 жыл бұрын

３；２５くらいにキャブ左、燃料パイプの奥のパイプから燃料漏れてない？

@k6roadbikers 4 жыл бұрын

以外と吹き返しもあるのね。😃

@partsroz1962 3 жыл бұрын

Hi, just a curiosity question but why is the throttle racing after acceleration, and why is all the unspent fuel blowing out to atmosphere? I dont know what engine you have this carburetor on either, that would be good to know. I am a big fan of carburetor and opposed a little to EFI, so if you want to remain in business you will have to give more than just this!, dont you guys over there at YOSHIMURA know how the internet is working? come now the market is open and its time to share, so we can evolve into the future.

@petestix46 2 жыл бұрын

Just a guess,but I recon its on a dyno.

@xjr2706 4 жыл бұрын

バックファイア火炎放射器作れちゃうぞコレは

@mauricioalfredo83 7 жыл бұрын

not every heros are dead :D

@user-ju2bp3yw2o 6 жыл бұрын

エイプにヨシムラキャブレター新品でつけてる筈なのに燃料漏れが酷くて敵わん両端の目倉からにじむ程度だが確実に漏れているそしてヨシムラに電話したらオーバーホールのメニューが有るがそれをやるより新品を買った方が良いと言われる始末… その新品を買ってこの状態なんだけども… ハイフローの原因も洗い出したが見つからず何をしても漏れてくる(；´_ゝ`)

@akioasakura564 5 жыл бұрын

郷祐平両端のソレはメクラに見えますが真下からのぞいて見るとちゃんと穴が空いてますよ、内径3ミリ程度の耐ガソリンホースでうまく処理すればキャブ本体のボディ「側面や、吉村ロゴのステッカー」が濡れたり汚れたりはしないと思います。参考までに^ - ^

@user-oi3ip9ps1t 4 жыл бұрын

油面調整