Tony Mullins now 52!!!!

54 Prius Owners

Facts bro

70*

Exactly!!

Emp210488 Thanks,appreciate it

Thanks,I watch them too to motivate myself to build another one 😂🤣😂

Anthony Beenham Thanks

Lumumba Kapanga Thanks

Morgan Binch lol..congrats man,you’re gonna love it after your turbo install,so much fun

WhaDatProduction thank you. What do you recommend me to get for a little more then 8psi. ?

best of nick Thanks

Thanks

ya man,its a very nice platform

+WhaDatProduction you have a Instagram bro

+Eddie Morales No I dont

This is a mk4...

@@cvbgbnj6871 clearly. Want to do the same thing with a mark3

Fi real mon,respect sah

😁😁

🦾

Ya man,not too bad..lol

Left this comment here 3 years ago. I now have an s366 on my 335i lmao

SeeTheKarma Thanks

Juan Perez Its the regular ebay cast,watch my build vids,had to do a bit more than hammering to make that turbo fit..lol

Fi real mon,it getting there inuh

***** ya man thanks,thats the best/cheapest way to go,jus buy one that snapped timing chain cause u gonna have to pull the head anyway,replace the bent valves,new chain and install u headspacer and ur good to go again

***** lol..ok boss

+armydawg1292 yes,looks and fits decent too

hey there i just bought a b6 a4. ultrs sport quattro 6spd..hp sucks...cheap route to get to 250-275 flywheel hp

+fastest eaton lightning in socal Not sure how far a flash/tune would take you but i'd start there,along with intake and exhaust if you dont already have those...

SeeTheKarma Thanks,yes alot of fun driving it

yes I did,its straight forward though,once you attempt to do it you'll figure it out

JustinoR32 Thanks man..lol

Ronald Munn Its a tial 50mm bov

bigzgs Journal

Lol..Correct aka s366,However its would be small to be a tractor turbo as I have 171702 on my rig which is also a t6 aka s475 😁..that 6262 mentioned probably would be more suitable for your build as it also would be more responsive over the s366 which comes on later as far as spool time goes

Steering is a momo jet,standard short shifter with an additional 2" taken off and the rear seat delete was custom made by me using aluminum

Awesome car! Thanks for the Info!

+Slammed Whips Ty,np

Thanks

Pyrax Its prettymuch a pieced together kit with some parts being custom made

Joe Mama363636 Had to wire it in,not sure if a plug n play harness is available

WhaDatProduction ok I’ve been calling around and I even got a hold of wolf and might get there newest computer but what all did you have to do to convert your electronic throttle body to a cable? I got the trottle body just not sure with the peddles

Joe Mama363636 Throttle body and pedals were converted to drive by cable ,also my oem tach wouldn’t read the signal from the wolf so i ended up modifying the that guage in my cluster as well,the pedals i had I believe were from 034 motorsports,not sure they still make that kit though

WhaDatProduction yeah I looked and they don’t make it but is it just a pedal, cable and throttle body or did it have some wiring as well?because if it’s just the hardware I’ll weld something up but how did you plug in the cable throttle body?

tru tru

Yunus Rai Custom 3” into a magnaflow muffler

Nelson Reyes Thanks

@@WhaDatProduction i wana do turbo my v5 golf what the best way bro

John Calderon Thanks

My car had a standalone and was tuned by Waynespeed out in queens NY, however I never did a high boost build on a 24v so i really couldnt give you much pointers,as far as personal experience i've mostly dealt with the 12v which can take pretty much anything thrown at it

lol..thanks

thestig572420 Never had a mk3 but with the mk4 Its a file uploaded to the ecm as opposed to burning a chip in

WhaDatProduction Ok thanks. Did you change out the cams in the mk4 12V when running a short runner intake manifold? Did you run the lower plastic mani or use a AAA lower aluminum manifold? Thank you so much for the help !

thestig572420 Yes I had cams with the short runner on boost,never had cams NA though

Its a vr6

Still a VR6 but you have a little more power in yours, parts for the 24v are more pricey than a 12v. Seems like it's easier to source Turbo parts for the 12v than a 24v.

Jordan Raihl Its on a wolf v500 standalone,tuned by WayneSpeed

Fi real war head

Fwd

Buy it,i'll go build another one...lol

Luis Carlos Lozada yes

💪💪

+WhaDatProduction how much were they? I wanna do the conversion

+Mothruh the actual coils were approximately $50each and you need three,can be picked up at any local auto store,autozone etc.

+WhaDatProduction I wanna get these instead of stock, what else would I need? Three of the coils, bracket etc.

+Mothruh Depents on how handy you are but i made my own bracket

TheMainMan318 Thanks,those are regular msd gm style msd coils retro fitted to my application,they create 4x more volts and are less prone to failure

WhaDatProduction I know a common swap for the coils is using the ford coils, are these as straight up as a set up as the ford?

TheMainMan318 Not familiar with the ford coils but i would assume so as these are easy/straight forward as well

LehDavid Its a .91a/r twin scroll that i knife edged to work with my open scroll manifold

WhaDatProduction what Engineering speed have you full boost?100kmh-200kmh how many seconds?

Thanks

I got a vrt cabby its bad ass to

+nigel alexander Nice,gonna check it out if you got it posted

What part of ny are you in because I'm in jersey

+nigel alexander Westchester

Pog Crohnie i want put turbo on my vr6 too😍

@@cabra_team9378 Its on first start in a week!

lol..I have no idea,I guess it would depend on how parts were aquired,brand of parts,who's installing parts etc..really hard to tell.

Kat9293 Gmk Thanks

ngk brk7e

Alex Melendez any local auto store sells them

Jack Williamson All the questions you just asked is in the title and description under the video

Taylor Mcwilliams stock motor in this clip

DARK PHOENIX HD Pon dis particular setup it wasnt much as it was still stock internals with just basic bolt ons but hard fi put a dollar figure as i kept changing around shit

Wolf v500 standalone

Aman Brar Flange size is 4.1" and a 39mm precision 2 bolt wastegate

WhaDatProduction is it t3 or t4 flange ?

Aman Brar t4

WhaDatProduction did u modify the flange for the turbo ? and what kind of exhaust manifold

WhaDatProduction did u modify the flange for the turbo ? and what kind of exhaust manifold

Blade Trinity I’m not a mechanic,I just do it as an enthusiast so I wouldn’t want to take the responsibility of building someone elses 😁

@@WhaDatProduction what do I need to get, my brother? I am gonna do the build.(or atleast fuck up my car trying to☝️😂)

@@vr6forlife25 😂😂you’ll figure it out just like i did

Ya definitely laggy,but when it hits its like a on or off switch 😁

@@WhaDatProduction yeah I got this turbo in a trade from a friend wasn’t sure about it since it looked massive but fuck it figure I’d try it. It’s going in my mk1 rabbit drag truck. And it’s got massive ported head with springs & retainers DRC 268cams custom Short runner intake by don Octane, bottom end has JE Pistons 3.0 bottom end with IE Rods with Air to water Intercooler, on microsquirt with E85 and 160 shot of nitrous and my truck is full drag set up with lexan windows and weighting at 1520lbs on Bogart slicks and skinnies. I’m about a week from going to tune. So just wanted an opinion from someone that ran this before I try it😁

@@jdportwerks6795 wow..it sounds wild already 😁😁👿👿

Thanks

+WhaDatProduction yo were r u located I am in CT we need to link up I am trying to build my jetta

+Damien Travis NY,relatively near to the Ct border

+WhaDatProduction OK close to me I am in new Haven CT

+WhaDatProduction hit me up on my email damien161984@gmail.com n go from there n c if u can help me finish building mine also

Ricardo Rodriguez No I dont tune it myself and the standalone had to be wired in,wasnt plug n play

Was running a standalone system that required drive by cable so I used the throttle body from a mustang with the setup

@@WhaDatProduction Thanks for your reply, im trying to turbo my vr6 with a SpeedyEFI standalone so id need one too. Did you use the pedal from the mustang as well?

1 no the pedal setup was a kit that use to be sold for this specific conversion however not sure its still available as this a while back but you can search the interwebs🕸 and see what you come up with 😀

xXWeltchXx What engine light 😃😃

+hellaflushhonda well it depends on ur goals and budget,I personally get a lot of parts used from the local forums etc.

just like a basic setup nothing to special

+hellaflushhonda ok,well start by reading or browsing through build threads to see if u find something that fits ur desire and go from there,its really hard to define a basic setup as different individuals applications might differ...but you can probably start with like a stage1 kit

and one more question how did you do the aftermarket shift knob cuz,i know the mk4 jettas is threadless

I wanted to,as i took em down to ad my new intro..seem like i didnt save it on my drive..smh

+WhaDatProduction What wheels are you running?

+SovietsRule 18x9.5 squared varrstoen es2

Penlul stock trans with lsd and all arp hardware however it still break once in. a while

Dottor B I already invested in a twin disc,upgraded axles and lsd so it would be hard to switch over to o2m at that point..lol....I heard theyre stronger though

Its hard to put specific time and figures as i changed my setup a few times over the years but this particular setup was within a week

Thanks,only borg warner I have experience with are the s366 and my present s369