MK7 Golf R, the quest for even more power.
Рет қаралды 8,237
28 күн бұрынThis MK7 Golf R is back for even more power. We take this stock Gen3 2.0T engine and install rods, pistons, upgraded valve springs and a handful of other items to help support the new EQT Typhoon turbo charger.
Parts list
COBB AP with EQT Custom Tune
Vortex XL
Upgraded MAP Sensors
CTS Turbo VW MK7/Audi 8V direct fit Intercooler (GTI, Golf R, A3, S3)
comotorsports.ca/cts-vw-mk7-a...
CTS Turbo MK7/7.5 VW GOLF R, Intake
comotorsports.ca/cts-turbo-mk...
CTS Turbo Multiport Injection Upgrade Kit 980CC
comotorsports.ca/cts-turbo-mu...
CTS Turbo Stage 3.5 Hellcat Fuel Pump upgrade kit
comotorsports.ca/cts-turbo-st...
Autotech High Volume Fuel Pump Gen3
comotorsports.ca/autotech-hig...
CTS Turbo MK7 Golf R/8V Audi S3 Downpipe
comotorsports.ca/cts-turbo-mk...
CTS Turbo MQB High Flow Turbo Inlet Pipe
comotorsports.ca/cts-turbo-mq...
CTS Turbo MK7 Golf R / 8V S3 Catch Can Kit
comotorsports.ca/cts-turbo-mk...
CTS RESONATOR DELETE KIT - VW MK7/7.5/ GOLF R & AUDI A3/S3 8V+
comotorsports.ca/cts-vw-mk7-a...
APR Subframe Insert Kit For MQB Early
comotorsports.ca/apr-subframe...
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports "It's only money" T shirt - comotorsports.ca/co-it-s-only...
CO Motorsports Holographic Sticker 2 Pack - comotorsports.ca/co-motorspor...
CO Motorsports Pullover Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Zip-Up Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Shirt - comotorsports.ca/co-motorspor...
CO Motorsports Snap Back Hat - comotorsports.ca/co-motorspor...
CO Motorsports Beanie - comotorsports.ca/co-motorspor...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
@COMotorsports 26 күн бұрын
Back for even more power!
@itschefff 26 күн бұрын
Very similar to my build. Stock head?
@COMotorsports 26 күн бұрын
@@itschefff upgraded valve springs
@chadyoung2481 25 күн бұрын
How much did it make this time dave
@Mk7_kev 26 күн бұрын
Not very often you see a manual R going big power, Love to see it ❤
@I_dee_k 26 күн бұрын
I have the tsunami in tank pump setup on my 17 A3 and it definitely fixed my fuel starvation issues. Worth the price compared to the pm4 setup.
@42cuba 26 күн бұрын
Awesome content keep it coming!
@reconbullet5449 26 күн бұрын
Soon to put typhoon on my clubsport
@jameshaulenbeek5931 26 күн бұрын
The video was... *Too Damn Fast* 😂 great video as always!
@prisonr506 26 күн бұрын
Nice
@jg-pt4gu 25 күн бұрын
hell ya
@sf2372 26 күн бұрын
Lot of moving parts to the ol EA888
@COMotorsports 26 күн бұрын
@@sf2372 fo sho
@arsenyrazhkov4559 26 күн бұрын
Which rods and pistons were used and specs ? OEM bearings or upgraded?
@COMotorsports 24 күн бұрын
JE's, I Beams, and Cali Coated Race bearings.
@savagecr-x2438 26 күн бұрын
Yeeehaaaaa
@MauriceEllerbee 25 күн бұрын
Definitely keeping this video in the pocket
@MauriceEllerbee 25 күн бұрын
Also good news, I took your advice and found a tuner that is up for the task I ask you guys about with my Gen3 1.8T Jetta build and you told me before doing anything drastic to find a reliable tuner who can confidently say they can do it. I talked it over with Russell Road and Racing in the UK and he can help me with tuning as well as getting the newer ECU with Simos 18.1 or .2 and make it pku and play to my car. All the big names couldn’t help me whether Unitronic, EQT, TPG Tuning or any other brand. I just want 500-600hp with a low torque so won’t have to go extravagant like this guy is but will definitely take some notes because everything I found was godly expensive and thought I’d really have to go thru JDY Performance for the miscellaneous mods other than internals where now I see EQT has the lpfp I can use. Things are all coming together now and just have to build my spare motor. JDY offers a boot on end kit with pistons, rods, head studs, gaskets and all for like $2500 and they say they are rated for 1000hp. What internals would you guys recommend? I’m building a 2.0T block from the newer MK7.5 GTI.
@RoryTobias_ 26 күн бұрын
How long did this entire process take you guys? great work btw!
@andyid26 25 күн бұрын
Id love to build a setup like this for my MK7R. What is the ball park cost for something like this? Rebuild and turbo setup?
@burb17 26 күн бұрын
What pistons? They seem nice and quiet. My Mahles were loud as hell until it heated up. Sounded like a rattle trap.
@CliffB5A4 26 күн бұрын
💪
@JusDitty 24 күн бұрын
RINGER RACING!!!!!! TBE
@gabeallen1212 26 күн бұрын
very exited to see the HP numbers for this one. will you be running pump gas?
@COMotorsports 26 күн бұрын
@@gabeallen1212 pump and E
@steveallam 26 күн бұрын
What was the purple bottle you were using to on the bolts?
@COMotorsports 25 күн бұрын
@@steveallam purple bottle was assembly lube. Used on bearing surfaces, not on bolts.
@DS-ed9nn 26 күн бұрын
piston to wall clearance? new rings on a factory hone?
@COMotorsports 26 күн бұрын
@@DS-ed9nn new rings so of course honed.
@shiftyeyes67k 25 күн бұрын
What is the modification required to the fuel tank to accommodate the EQT Tsunami fuel pump? Looking to get this installed soon, but want to give my shop a heads up. Can you drop a link to the mod needed for the fuel tank? Thanks!!
@COMotorsports 24 күн бұрын
@@shiftyeyes67k just google the install. There's a complete video
@dwvw 23 күн бұрын
Basically there is a plastic clip that holds the tubes in place, You have to cut the end of it off so the new "basket" will fit all the way down. Very easy, and EQT has a video on their youtube channel.
@shiftyeyes67k 20 күн бұрын
@@dwvw Found the vid. I appreciate the explanation! Thx!
@myrx2 26 күн бұрын
Ever used galano engineering software?
@COMotorsports 25 күн бұрын
@@myrx2 negative
@cebiondark 23 күн бұрын
Manual trans is going to blow in 3,2,1....
@joewontwice 25 күн бұрын
What does my mk7r need for 500 hp
@dwvw 23 күн бұрын
Hybrid turbo, MPI and a LPFP would do it.
@jonxero7241 25 күн бұрын
I have a manual mk7 gti with a gt2260s running the 93 tune from IE (About 440-460 whp). I want to do watermeth and eventually e85. I have 52k miles on stock bottom end. At what point should I crack it open to upgrade the rotating assembly?
@forestmetten870 25 күн бұрын
Did you dyno the car? Cause those numbers are very impressive for pump gas and stock fueling…
@jonxero7241 25 күн бұрын
@@forestmetten870 I have an apr stage 3 high pressure pump coil packs and plugs
@forestmetten870 25 күн бұрын
@@jonxero7241 MK8 here with this turbo with low pressure fuel pump and MPI Kit installed running Flex Fuel Sensor for Ethanol the power you claim to make on Pump Is not right my friend ur probably more like 385-400whp👍🏼
@silentvalue 25 күн бұрын
Yeah mine on a good day using 93 is probably 400 whp.
@forestmetten870 24 күн бұрын
@@silentvalue exactly! Ethanol is where we see the big gains in power. My car on E60 and up makes 440-460 whp.
@TheNelson456 26 күн бұрын
Another junk typhoon that’s not gonna out up any good times. Dyno queen for a number and done lol
@boostkash2640 25 күн бұрын
Show more car and less face less talking boring bl bla
@COMotorsports 25 күн бұрын
@@boostkash2640 it's easier for you just not to watch.
@jaxxone4907 26 күн бұрын
I hope you guys dont tune it with that air intake on🤣🤣
Mighty Car Mods
Рет қаралды 570 М.
Dave's Auto Center
Рет қаралды 140 М.
Мотомалышка Алина
Рет қаралды 6 МЛН
Les meilleures astuces de Fabiosa
Рет қаралды 10 МЛН
Had to have high, high hopes😅🥰 #viral #funny #motovlog #trending #top #motorcycle #shorts #superbike
Ximei Jo
Рет қаралды 4,5 МЛН
Fabiosa Best Lifehacks
Рет қаралды 2,3 МЛН