Disclaimer: this video is for entertainment purposes only! Do not attempt repeating any tests seen in this video to avoid serious personal injury and damage to your property! #knife #sharp #edc #mkm
Пікірлер: 68
@CuttingBoardRx5 ай бұрын
My opinion: this is a superb competitor to mini Bugout, Bel Air, Deka, and Kizer. Everything is better! Incredible!
@stewart77195 ай бұрын
i have questions
@luisnouel42685 ай бұрын
I like this little knife. I'm going to buy it. Thanks for the video!!
@CuttingBoardRx5 ай бұрын
I recommend this over BM 537/945, KAI Bail Air, and even Hogue Deka. The only knife that still competes with Yipper is Spy Manix 2 LW
@michaelarellano86325 ай бұрын
The WIUG symbols stands for what is up guys, like Ben Petersen says in the clip you used of him.
@CuttingBoardRx5 ай бұрын
Aha! Thanks! So when I design a knife, I should emboss HTKPHL&G on the blade? 😆
@mel871235 ай бұрын
Ummm...what?
@CuttingBoardRx5 ай бұрын
@@mel87123 hi there, knife people hello Lady and gentlemen
@mel871235 ай бұрын
🤣
@jlogue7515 ай бұрын
Italian 940 designed by Ben Peterson?...I'm in!!
@CuttingBoardRx5 ай бұрын
I hear you! It’s more like a 945 Mini Oz but yeah, it blows Kershaw Belair right out of the water! It’s more like Deka on steroids 😃
@daver65645 ай бұрын
Love the 945, it’s always in my pocket. This looks like a wonderful edc.
@CuttingBoardRx5 ай бұрын
Precisely! It’s been in my back pocket for a week!
@enriquescott29832 ай бұрын
First of all I really enjoy your reviews I have subscribed and yes my Kaiser's look just like that when I received both of my kaisers I had to adjust the Omega springs that's what I do to my lubricating I don't dare to take anything else apart
@bankuei5 ай бұрын
Thank you for this review! I'm on the lookout for 3 inch and under blades so I'll be very interested if you do more videos on office EDC options.
@MrBowser20125 ай бұрын
I really like that one! I have no restrictions whatsoever when it comes to blade length so I’d prefer a bit longer handle/blade but that’s a winner for a small knife. Great review!
@CuttingBoardRx5 ай бұрын
Thanks! It’s been at the office with me whole week!
@Hungrybird4744 ай бұрын
The $129 manix 2 Rex 45 seems pretty good and I seen balde hq has a m4 in mint green handle . Pretty much the same but the acoustics with a tightened pivot are smooth and sounds so cool on my version . I love it . I roll edges all the time when I should have grabbed a utility knife blade and didn’t 😂
@deving33704 ай бұрын
The Sencut Scepter is basically a budget version of this. There is also an Ozark Trail that is a super budget version.
@arg16064 ай бұрын
thanks for the review friend, have seen in some places that the blade has a design flaw because it hits the screw when you fold it strong enough ruining the edge in the long run, is it the case for you?
@sjohnson48825 ай бұрын
Reminds me mostly of a ProTech Malibu tanto style. A bit smaller than the Malibu.
@CuttingBoardRx5 ай бұрын
Malibu is more ergonomic being a mid sized knife. This one is more robust though especially the lock.
@RamZar504 ай бұрын
- Yipper should be compared to Mini Bugout, BM 945, Bel Air and Hogue Ritter Mini RSK. All have the Crossbar Lock. - Yipper is $13 less than Mini Bugout plus it gives you G-10 over plastic and MagnaCut over S30V. - I’ve heard of issues with the Yipper’s blade hitting the barrel spacer and slightly denting the blade edge.
@bearlynormalwetshaver18945 ай бұрын
They state blade steel hardness between 61 -63. I wonder how good its edge retention will be.
@CuttingBoardRx5 ай бұрын
I think it’s actually right at 63 or even harder. Perfect range for magnacut!
@benwatson670017 күн бұрын
Does yours have the issue of the blade contacting the barrel spacer? I have been seeing this being mentioned quite a bit. Not sure if it is all of just some of the the first run.
@CuttingBoardRx17 күн бұрын
Mine had zero issues but they did occur on early knives. The company admitted it. The fixed it by swapping in larger thumb studs.
@benwatson670017 күн бұрын
@@CuttingBoardRx Awesome! I saw where they were talking about that as a possible fix but not that it had been implemented. Thanks for that info.
@Mr.Schmel3 ай бұрын
Hey, I have a question about this knife. I am looking for a new EDC knife, and I can't decide between the MKM Yipper and the Civivi Sendy. I know the Yipper has a way better steel, but would it be worth all that extra money when Nitro-V is fine enough for what I personally need it to do?
@CuttingBoardRx3 ай бұрын
Apparently I lacked out with the Yipper some folks had a major issue with blade hitting the back spacers when flick-closing. I’d stay away from it if I were you.
@Mr.Schmel3 ай бұрын
@@CuttingBoardRxThank you for your response
@sharkbate35 ай бұрын
Pretty sure the mark on the blade is ben's maker's mark, meaning "What's Up Guys"
@Hectorszenshopedc5 ай бұрын
MKM is my bandwagon lol
@CuttingBoardRx5 ай бұрын
Not a bad wagon to jump on!
@mel871235 ай бұрын
How difficult is it to sharpen the curved tip of that little EDC?
@CuttingBoardRx5 ай бұрын
I think it’s actually easier than 945 Osborne bc there’s more space to clamp it into the Work Sharp Precision Adjust that I use.
@Hungrybird4744 ай бұрын
Fixed angle all the way for a perfect “v” edge . Hand sharpening tends to convex the bevel and probably tougher for sure actually . I like covex edges on my thicker cold steel type blades
@ninemimesleft3 ай бұрын
Are there no lefties in Italy or something?
@RyanWaldroop3 ай бұрын
The Yipper is ambi
@bill64gr5 ай бұрын
Mini bugout is better overall as light hard knife except the fragile to lower angles S30 and price...
@CuttingBoardRx5 ай бұрын
Good points!
@mel871235 ай бұрын
Gondolier🙂
@GerstBladeworks2 ай бұрын
I love the Italians style , like really really love it but their execution on heat treats with some modern steels, specifically Magnacut is subpar. Also, I don’t think I have ever had an Italian knife with *wonderful* action, only mediocre. How do you like the action on the yipper?
@CuttingBoardRx2 ай бұрын
My and your lucky day: I got two questions for the price of one, and you got a hardness test on a portable tester that I just got yesterday! 59.6 HRC 😁 So about the action: mine is just perfect. But! Read some of the comments below. There was a bad batch. MKM fixed the issue by enlarging the thumb studs to serve as the stop in closed position.
@GerstBladeworks2 ай бұрын
@@CuttingBoardRx That’s cool you got a hardness tester! I have to go down to the local machine shop to use my friends, luckily I have a “hook up” because he works there. Also, I don’t know if you saw it or not but I left a comment on one of your other videos about what pants you were wearing , I know it’s a bit odd to ask lol 😝 but the ones that have the pocket protectors in them, what brand and model are they ? I’m looking for something just like them .
@CuttingBoardRx2 ай бұрын
@@GerstBladeworks I replied to your question, but KZfaq has a known issue with comments being delayed. Wrangler Technician $28 Walmart. I have 4 pairs now 😁 Works best with Ozark Trail knives 😂🤣
@GerstBladeworks2 ай бұрын
@@CuttingBoardRx 😆 apologies then, I didn’t see it or get a notification for it. I appreciate the reply !
@richardvirchow33905 ай бұрын
That’s a very desirable knife, I like the blade shape and knife’s silhouette..!
@CuttingBoardRx5 ай бұрын
It’s very easy to carry and use especially around non-knife people.
@stewart77195 ай бұрын
I have questions
@CuttingBoardRx5 ай бұрын
Ask away!
@stewart77195 ай бұрын
@@CuttingBoardRx how can i contact you
@CuttingBoardRx5 ай бұрын
@@stewart7719 email in channel description
@stewart77195 ай бұрын
@@CuttingBoardRx I did. Read it
@CuttingBoardRx5 ай бұрын
Are you the one asking about Medford?
@ElonaldTrusk5 ай бұрын
Inheriting a job/destiny does NOT mean someone will be passionate about the work... It can often mean quite the opposite. Id prefer to buy from people who SEEK the craft and DESIRE to be great at it. The only knife ive bought from maniago was a lionsteel/spyderco collab called the lionspy, and i was disappointed. I think ill pick up a yipper though... Being a fan of the deka, this looks like something I'll definitely carry often!!
@mel871235 ай бұрын
That is an interesting take and a good point. Generational experience likely provides a huge benefit to those who inherit a trade from ancestors...but only if the pride, talent, and work ethic are there. Lack of experience often shows in newbie designs. Sometimes the design is innovative but the engineering and execution are crap.
@CuttingBoardRx5 ай бұрын
I don’t entirely agree. If somebody’s father is a great fisherman, that person is very likely to be a good fisherman as well. That’s part learned behaviour part genetic. Obviously not every sibling in such family, will inherit the skill and passion for fishing, but some transference is very likely. Besides, to work in one of these shops, a kid would have to go through full up apprenticeship, unlike somebody hired off the street at a minimum wage.
@CuttingBoardRx5 ай бұрын
The more I think about your point the less I agree with it. I’ve been to Italy several times I visited a city that is specialising in carving cameos. I did not notice anybody being disappointed in their jobs even though they carve cameos days in and out. Hereditary pride is nothing to sneeze at. Something American knife makers should be considering when selecting location And training their workforce. Example: the shitty craftsmanship of Medford knives vs. CRK guild-level perfection
@ElonaldTrusk5 ай бұрын
@@CuttingBoardRx I'm speaking from experience. Passion will always be a better motivator than "well, my dad and his dad did it". Yes, growing up with accumulated knowledge being dropped in your lap is an advantage, but it doesn't improve ones natural skill or passion to be great. Is a person inherently better at clock making because they're swiss? No... But the accumulated experience and knowledge is available to them if they yearn to learn. We have KZfaq now ... And China has cnc tech.... Saying a knife is better than another because of a country of origin is beyond ignorant at this point.
@ElonaldTrusk5 ай бұрын
@@CuttingBoardRx btw Id rather EDC a boat anchor while underwater welding than carry a Medford.
@21_Cabbage_5 ай бұрын
Pretty boring design, but that is exactly what I expect from Ben Peterson
@CuttingBoardRx5 ай бұрын
It is a traditional design for sure! Yet the execution leaves all of the US companies that make xbar locks in the dust. They should apprentice in Maniago
@Hungrybird4744 ай бұрын
I wonder if the yippur is short for yom kippur? It’s a Jewish holiday I believe .
@CuttingBoardRx4 ай бұрын
Yom Kippur is the Day of Atonement, the Highest Hebrew holiday of the year and the most somber one. I doubt there’s any connection.