MKS DLC32 WIFI CNC Control Board Review

Рет қаралды 28,390

Күн бұрын

This is the new MKS DLC32 V2.1 Wifi CNC Control from Makerbase.
this board can be used to control any CNC machine that operates in the XYZ plane using stepper motors.
in this video i have reviewed the board and shown you how you can use the board, how to set it up, install the latest firmware, how to connect the board to wifi through which you can use the board using any device in your wifi network. also you can use the board using the MKS laser smartphone app.
i have set up the board to use with my laser engraver
you can find all the useful links here:
Laser Engraver project: • Converting my 2D Pen P...
MKS DLC32 Github: github.com/makerbase-mks/MKS-...
MKS DLC32: s.click.aliexpress.com/e/_DB5...
#cnc #laser #laserengraving

Пікірлер: 51

@zaffy001 3 ай бұрын

Very nice explanation 👍😇

@Island.dweller 9 ай бұрын

thanks

@Hollywood4Fun 2 ай бұрын

I set this card up with three external stepper drivers for my homemade 3 axis CNC machine. I'm using open builds control to test everything and it seems to be all working correctly. I'm wondering if I need to supply the board with 5 volts if it's not connected to USB? Or does it get all of its power from the 12-volt connector?

@aqwamnasimbada1351 8 ай бұрын

Can we add relay for automatic spindle switch?

@skurniyantomappadang 3 ай бұрын

can this board use for 10 watt optical power for laser diode? thanks

@dacianfd8418 6 ай бұрын

I can use this board with the draw cnc ?

@MineOrebaker 7 ай бұрын

I am having a problem like once I connect my msk laser tool for wifi and after that If I disconnect the power then my board is not connecting again I'll have to connect the board and reconnect for software while plugging so there is any to skip this ?

@douglaslim992 6 ай бұрын

Maybe you can try to reflash the firmware back to 2.10 or 2.08 as shown in the video

@africanhubza Ай бұрын

how do you set a zero point to start from

@user-mq2ws6rh2s 3 ай бұрын

Можно ли подключить к этой плате старый offline contriller с кнопками?

@AbdullahKhan-vb1xr 4 ай бұрын

please can you tell me about the wiring of the nema17 with mks dlc 32v2.1. I am facing issue with the running of the motors with the board.

@sashgorev Ай бұрын

Do you put driver boards on main board? They are sale separately in some offers.If yes check is they right connected to the main board. If yes you need data sheet for Nema motors to see what pin for what is. Good luck 🤞

@roberthosking7524 2 ай бұрын

What is "S" axis? I noticed mine jumped to 50 today. Weird.

@AnzAnnGaming 8 ай бұрын

Can you share the stl file for the case?

@pierpa_76pierpaolo 3 ай бұрын

But here there are two "Y's" and not XYZA . How do I solve on the software? Thank you very much.

@Basement_CNC 2 ай бұрын

you cant, its a hardware limitation, since it only has 3 driver ports, and the 2y outputs are both connected to the same driver, so gantry squaring wont work either

@Hollywood4Fun 2 ай бұрын

Why doesn't the mobile app have z-axis?

@xandi3205 Ай бұрын

would this work for the 2D Pen Plotter with all the same feature or is it just for laser engravers

@sashgorev Ай бұрын

Think yes if you're machine work with G-code commands.

@ytskt 3 ай бұрын

How are you buying it in India?! Or is there any Indian supplier?

@akhmadabai7787 3 ай бұрын

if wifi setting installed are can still use in Lightburn?

@sashgorev Ай бұрын

Yes,go to Lightburn in settings and re-add laser again with wi-fi connection.

@flopesff 10 ай бұрын

I am having an issue using this board. During the milling, the Z axis is going down. Do you know what happening?

@Basement_CNC 4 ай бұрын

it is probably the forces of the endmill pulling down on the z axis, and the stepper isnt strong enough to hold it in place. mayby try a straight flute or downcut endmill, the dont produce that much force pulling down

@DearChina1 2 ай бұрын

Change Your stepper motor ,I got the same issues last month

@flopesff 2 ай бұрын

@@DearChina1 The issue was solved? Did you use some special stepper motor?

@DearChina1 2 ай бұрын

⁠@@flopesffno just replace with the same,yes isssues was solved

@jj8482 7 ай бұрын

does lightburn work with this??

@jwrtiger 6 ай бұрын

The TwoTrees Laser I have uses the same board less the display board. I have no problem using the latest version of LightBurn.

@zaffy001 3 ай бұрын

Hi sir can you please give case stl files. Dlc32 board case.

@venko3211 9 ай бұрын

If possible to use for CNC router

@JuiceWrId_999 6 ай бұрын

Yes

@JuiceWrId_999 6 ай бұрын

It’s labeled as a cnc laser machine you just connenet a spindal to the port that says spindal

@amdadulhaque4625 6 ай бұрын

Does it support Lightburn?

@jwrtiger 6 ай бұрын

The TwoTrees Laser I have uses the same board less the display board. I have no problem using the latest version of LightBurn.

@Robert4390a 6 ай бұрын

my dlc32 v2.1 board does not auto connect to wifi

@JuiceWrId_999 6 ай бұрын

Mine does😂😂

@douglaslim992 6 ай бұрын

Which version of firmware you installed, the latest 2.30 was disable that Wifi autoconnect feature temporarily, to fix some bugs…if you want it back, best to flash the older version, 2.10 or 2.08