3D printed Star Wars B-Wing scale model build

Рет қаралды 10,204

Күн бұрын

Pre-order the HeyGears UltraCraft Reflex: store.heygears.com/referral/r...
Claim an extra $50USD off in HeyGears IdeaShapers community: bit.ly/3pVBupP
Let's see if it is a feasible option to print models at home instead of buying ready made kits. Cost wise (printer excluded): 3D model 25$, Bandai - 75$ (if you can find one). All said and done obscure or other wise overlooked subjects are now much easier to create... not easy - easier :)
Tools and materials:
-- Glues --
Premium thin CA glue - amzn.to/3lJdMYD
-- Masking materials --
ABTEILUNG 502 Liquid Mask - amzn.to/3LYlnxZ
Modelcraft Masking Tape 1mm - amzn.to/3wJQrMc
Tamiya 18mm Masking Tape - amzn.to/3Gi2un6
Tamiya Masking Tape for Curves 2mm - amzn.to/3z3RwQN
-- Oil paints --
ABTEILUNG 502 - Buff - amzn.to/3NAbcPx
ABTEILUNG 502 - Neutral Grey - amzn.to/3H6GTNB
ABTEILUNG 502 - Starship Filth - amzn.to/3I5RF8I
-- Paints --
Mr.Hobby H54 Navy blue - amzn.to/3wRBnMC
Mr.Hobby H305 FS36118 - amzn.to/3DlkoVo
Mr. Color C72 Intermediate Blue - amzn.to/3Onl42J
Tamiya LP35 - Insignia White - amzn.to/3MXxBqO
Tamiya XF20 Medium gray - amzn.to/3sZuff0
Tamiya XF53 Neutral gray - amzn.to/3z7NtTz
Tamiya XF57 Buff - amzn.to/3lO1Y6Z
Tamiya XF82 Ocean Gray 2 - amzn.to/3DniMuh
-- Primers --
Mr.Finishing Surfacer 1500 Black - amzn.to/3yUrqNG
-- Putty --
Tamiya basic putty - amzn.to/3lO5Hli
-- Thinners --
Mr.Hobby acrylic thinner - amzn.to/38o6GFx
Mr.Hobby Leveling Thinner - amzn.to/34hRkzH
Mr.Hobby Rapid thinner - amzn.to/3wSbWt7
-- Tools --
Budget Airbrush - Sparmax DH-103 - - amzn.to/3LP7QY6
High quality airbrush - Iwata-Medea High Performance Plus C - - amzn.to/38IaIJ3
Silicone Brushes - amzn.to/3wJHouD
Tweezers - amzn.to/3mukZvy
-- Weathering --
AK-Interactive Green & Brown Shading & Effects Set - amzn.to/3aep0BH
AK Interactive Weathering Pencil Box (37 Colors) - amzn.to/3ujmdxV
Prismacolor Premier Colored Pencil, Silver - amzn.to/3Jdtghr
Tamiya Panel Line Accent Color Brown - amzn.to/3u8JGTq
Tamiya Panel Line Accent Color Dark Gray - amzn.to/3GdIEb0
Chapters:
00:00 - Intro
00:35 - pre-processing
01:35 - Printing the model
03:49 - post-processing
07:50 - Assembly
08:37 - Painting the model
14:51 - Weathering the model
23:12 - Final assembly and finished model images

Пікірлер: 47

@apathtrampledbydeer8446 11 ай бұрын

Great paintjob and weathering, I like the somewhat stylized approach and that you can even see into the cockpit as well!

@MMScaleModels 11 ай бұрын

Thanks mate!

@deedevil63 11 ай бұрын

that wet kitchen towel trick for the resin dust is brilliant.

@MMScaleModels 11 ай бұрын

It works nice 👌

@dekon70 11 ай бұрын

Great looking build. You really captured the look of a well worn fighter. The battle damage is very effective. Also really liked the way you created the displays in the cockpit.

@MMScaleModels 11 ай бұрын

Thanks mate, appreciated!

@neilhaas 11 ай бұрын

❤😊🤗☺️🤩😁💯 I like this B wing Starfighter Star Wars thats amazing.

@johnathan133 11 ай бұрын

Looks like a nice 3d printer. The build quality seems to justify the asking price. Great build btw.

@MMScaleModels 11 ай бұрын

It is a good and well made system. I guess quality materials and cheap do not mix well :)

@tesarus8461 11 ай бұрын

Great build! Weathering and battle damage really help this model to be much more believable. I personally think that edge highlighting is a bit too much for a model so large, but that's just me

@MMScaleModels 11 ай бұрын

Thanks mate, sure everyone can like different things. I myself am not sure about the edge highlights in this application.

@tesarus8461 11 ай бұрын

@@MMScaleModels It is not possible to progress without trying something new and hey, is great regardless!

@erasmosanchezuser 11 ай бұрын

A tip. Paint black inside the joints before glueing. Airbrush can't reach crevises easily. Have a nice day.

@MMScaleModels 11 ай бұрын

Thats why i use black primer ;)

@Chilly_Billy 11 ай бұрын

This was a great introductory tutorial for resin printing models. Thanks very much!

@MMScaleModels 11 ай бұрын

Glad it is helpful 👍

@ModelMinutes 11 ай бұрын

That was a very cool build :D

@MMScaleModels 11 ай бұрын

Thanks mate 👍

@bugler75 11 ай бұрын

Looks so very Star Wars real👍🏼 Using masking fluid before painting to represent battle damage is a great idea, I’ll use that! Have you ever built and painted Gundam? I ve just built one and I hope to paint it with some weathering, damage whilst being attacked by modern aircraft, a what if scenario . Great video as always, Ian

@MMScaleModels 11 ай бұрын

Star Wars real sounds good 😁. Never painted gundam or mecha, should do some day.

@bugler75 11 ай бұрын

@@MMScaleModels I only bought two to build with my son. There is so much you could do with a Gundam😊

@TrayChester01 7 ай бұрын

There are some things that are incorrect, including the X-Wing pilot instead of a B-Wing pilot, but the 3D printed results are impressive.

@MMScaleModels 6 ай бұрын

Probably, I am not an expert... just having a good time :)

@garygenerous8982 11 ай бұрын

There are three ways to insert a USB stick because in reality USB drives are 4 dimensional objects. It’s how they can store so much information but it means you can rotate it 180' twice before coming back to the start.

@MMScaleModels 11 ай бұрын

😄

@neilhaas 11 ай бұрын

I have this starfighter already.

@goforitpainting 5 ай бұрын

Cool paint job 🖌

@MMScaleModels 3 ай бұрын

Thank You!

@WiFuzzy 11 ай бұрын

OK. Cool to watch. But how many models could I buy for the price of all that required hardware and consumables???

@MMScaleModels 11 ай бұрын

Thanks, probably a lot but the right question might be how many other cool things you can make with it :)

@darthhokum 10 ай бұрын

Perfect 👍

@MMScaleModels 10 ай бұрын

Thanks mate!

@ThePlasticModeler 11 ай бұрын

How did you get past the lack of a clear part for this?

@MMScaleModels 11 ай бұрын

Well, I simply ignored that and printed the frame only. Tried to mess around with the stl to make a printable transparencies but no dice.

@Aratondil 11 ай бұрын

Magnificent job, as always 😊 I wonder if there is any chance You'll make a Scythe escort from Battlestar Galactica Online?

@MMScaleModels 11 ай бұрын

Thanks, I really don't know what the future has to offer 🙂

@Aratondil 11 ай бұрын

@@MMScaleModels It's perfectly understandable, especially that there is no Scythe plastic kit model on the market that I'm aware of. Anyway, good luck and I'll be watching You 😁

@MMScaleModels 11 ай бұрын

@@Aratondil which makes it a perfect candidate for 3D printing:)

@Aratondil 11 ай бұрын

@@MMScaleModels Oh, I would love that 😀