Tech talks with George. We like those a lot here. The chicken and rice looked on point. Digging the look of the Cupra. It has come a long way. Mods for the win.

I think you nailed the camera settings, looks even better!

The first half for me was more like the science of motoring, very well explained Geroge! In my 35 years of driving I never knew what was meant my cast but consider myself schooled.

To answer your question Misha, pretty darn perfect!! The car, the video and the double food shot. Pretty awesome, thanks!

Nice video Misha, looks like Marta is finding her place in the team, that’s good, About the car it looks like you’re less fighting it than before, it does more what you ask it to do, good job George !!

The increase in castor , gives more dynamic camber, ie. more camber in the turn without having more static camber, witch is not wanted under braking or acceleration. This results in better turn in .

The quality looks great and makes you feel like you are right there in the car. Also the lap is great.

So many modern cars have these massive bushings in the front arms, I get that the average owner doesn't want to feel the road through the wheel but we all do! Powerflexing the front arms on my car is one of the best pound for pound suspension mods I did. Way better feel through the wheel and more precise handling too.

The POV view was amazing!!! Nothing better then cars disappearing in the mirrors

Saw you out there today blasting around doing taxi laps! The new livery looks awesome!

Yay! Gopro improvement! Also very confident on foxhole at 218km! Mind blowing! 🇵🇷

The Cupra looks really good fun to drive, such a cool build. I think someone should treat George to a tabletop hydraulic press. I have one I got second hand for cheap, so handy to have with its 10 tons of pressure 👌🏻

Die Euphorie nach der Runde sieht man dir an 🙏🔝

Nice Video. Love the combination of technical Information/Vlog and a beautiful Lap.

I like how George is explaining. He can be a good teacher. For the microwave - 2 minutes for this amount of food coming from room temperature is really too long (if you use the 100% power). Something like 45s. or up to 1 minute (when coming from the fridge) will be good but it depends from the temp. of the fridge. p.s. damn I'm obsessed with microwave ovens...

Hells yeah, green hell yeah, I got a moar! You are a rock star bro! Handles have been my focus and a great payoff over straight away speed. I dig. 🤘🔥😎🔥🤘

Proud to see spanish people working at Apex! Also, amazing video quality on the lap!

tech talk with George is always interesting n for those less mechanical ur understanding has increased(like me), thx George. Misha u have the helmet cam pov is really sorted now.

Lovin' the view from the helmet-mounted GoPro ...

That camera and positioning was perfect Misha. Brilliant vid as always.

Polybushes are the best value for money mod when it comes to handling 👍 good tech vid with George as always 😊

2160p@60Hz is a great improvement, instruments become readable. In a perfect world, a fixed camera on the instruments would improve sharpness. Great job. The suspension mods, for all George's clowning around seem to be really worth it. I guess you guys now have a target on your backs. :-[]

the POV footage looks great mate

That was a rock solid run Misha.. you do your best driving in that car.

Amazing lap. Its nice to see you pushing

saw you flying past me on sunday... damn fucking fast!!!!!!

Like the video, i see the Cupra gets better and better. Great job !!

Misha, if you're going to put 993 on a car lift - it would be perfect moment for a short tech talk on how does heat exchanger work (the one for interior heating), and how exactly you don't get to breathe exhausts in case exhaust manifold cracks. I know that old Soviet back-engined air cooled 3A3 had separate gas/gasoline heater - and I did wander how Porsche did overcome "interior heating problem".. just to find out this simple yet elegant solution they used. But is it really that "bulletproof"?

I wish George was my mechanic.Essex❤️

Look forward to seeing you out on a lap to see how the car has changed!

Nice lap, the car runs alot better !!!

great view. just seeing your eyes so far in front of you ( looking at next corner etc)

I love this cars and the build u made 😍

Maybe the leftfront is ffkd because its a clockwise track? Idk, thinking out loud.

Came for the double food shot. Wasn't disappointed.

i hope you had a beer with that chicken

Hey George, for the big bushing, I just use an air saw with a saw blade that fits into the bolt hole and go straight through the centre aluminum sleeve, rubber, then outer sleeve. Make two cuts, tap that "pie" out, and the rest of the bushing should fold into itself enough to drop right out with ease! As for the upgrade, are you guys allowed to switch to full bearings?

Great lap, looks like the chassis is well sorted! When you stop talking, we know you’re really on it, and it shows! Helmet-cam worked really well too. Is it on your forehead? And the little red Peugeot at the Karussell made me as nervous as it did you!

Nice video misha

Very good Misha, the best way to overcome the fear of Nur and your driving is to do what you do, little by little you will gain confidence. The Porsches await your return.

Amazing camera setup

Nice, meanwhile I just bought new rubber floor mats for my Up for the winter!

muy rapido y bastante estable si quiere Marta puede saludar a los españoles que vemos este canal buen video Misha saludos desde Tenerife

Camera angle is looking great!

I've heard the term caster a few times. Now I actually know what it does haha

De kip met rijst deed het hem deze keer, gelukkig ook een lekker rondje Nordschleife!

Love the helmet cam view

Good times. George's bushing removal tool reminds me of my own! LMK it he's for hire and a what rate!

Dang man when you try something out you try it out. Hahaa. Pretty impressive I must admit. Keep on keeping on. Doing a great job. Very entertaining.

Good video

That control arm looks exactly like 9th gen Corolla arms

when you realize your Cupra out handles a 993. 0.0

Cool video 👍🏻

Slight correction. The wheels want to go towards the rear by brakeing NOT at acceleration like it was told here.

The footage now seems to show real world pace and does the car feel more planted or is it the footage anyway great content as always...

OEM aluminum subframe and a Tyrol Sports Deadset Kit would be worthwhile mods also. Ok

You can see the difference of the car (understeer less) and the quality of the footage ! btw where is the gopro on your helmet now ? view is better ! almost remind me AC1 view lmao

🤩

Just did powerflex all over on my 997.1 Carrera S it's like going to heaven

Hi Misha , have you looked at the Verkline products for the Cupra ? Cheers Mal

Sieht super aus, die Qualität vom Video ❣️ U filmed with your new GoPro❔😅

Shame that poly bushes are not allowed for public roads here in Belgium. I would love to try them. But changing the controls arms every time I would have to go to the Belgian equivalent of Tuv/apk is just to much hassle.

That looks like it was really on rails

I do NOT care what car you drive. as long as it is fast and sweet. Canada - :)

Hi Misha, what happend to the M2? I saw it in the back on car stands. Super nice upgreats on the Cupra.

Have you made a decision on whether or not you are putting a wing on it? Worth it? Not worth it?

Going forward this shall be known as “the chicken in rice” vlog …

Really nice lap to watch! That situation in the small carousel was a little bit tricky… is it possible to add a speedo cam for these kind of runs? When will the next official race be?

Rimac ON NURBURGRINGGGGGG

19:55 flexing with your new microwave I see

I'm literally making rice and chicken.

10:14 f*ck the Nurburgring, it's delicious food by misha time.

✌😊 good Drive

#techtalk: Did George align the car again after replacing the bushings?!

Where the ring tractor btw ?

I am too slav not to point it out but ... I do wash any meat before cooking it. It has some manky goo when you unpack it :D

Misha Cooking Tips lol

No alignment after fitting bushes 😱

Install mods. Go test track new mods on one of the most amazing track on earth just a few minutes away. 👌 Life is good

where is the mk4 anyway? Update is long overdue!

Did you change sway bars?

You should do a workout video since your eating the same meal 86 times a day like a guy I work with, LOL!

So whats up with the M2?

🤘😎🤘🇬🇧

Man that Seat seems to be going really nice! Hmmm I wonder who the two nutjobs that hit thumbs down is :D

Hey Misha, kannst du uns vielleicht ein deutsches Video machen mit den ganzen Einzelheiten vom Leon? Ich verstehe nicht immer alles und es würde mich sehr interessieren. Grüße aus Stuttgart ✌️

Oh my god why don't you use Superpro bushes everyone knows those are better / why don't you buy a rice cooker, it is so much easier. - there, no need for these comments, just upvote this.

19:20 wow you lost so much weight. 😯

Где так английский выучил?)