I've worked on a few hundred oilrigs over the years and I have to say your ingenuity is impressive with this design.

I got to help drill 3 water wells in Zambia... We used an LS-100 portable rig from Lone Star Drilling Company out of Texas... this rig reminded me of the LS-100...

Cool machine. Nicely done.

Fantastic build. Thank you for sharing.

It's very nice and simple portable well drilling machine. Bravo.

Muy buena idea y muy bien implementada. Mis felicitaciones y muchas gracias por compartir. Saludos desde Chile

Great build! On the water return. If you keep the intake floating on top , to get less dirt etc . I am sure with your improvements and learning experience. You will have that satisfaction of a clean drinking water well. It is never easy. Good luck 👍

very impressed. very compact.

I've been watching a bunch of these DIY well drilling videos. This is the second one I've seen from Europe and I can already see a big difference between the EU approach and the US approach. There are lots of people in the US who dig shallow wells, but many of them seem to use a lot of water to drill the well. All of their contraptions require a flowing tap and hundreds/thousands of gallons of water to dig a 25-foot deep well. Whereas, the two EU guys who have done it devised these small reservoirs that capture and reuse most of the drilling water. This approach definitely seems to make more sense. Great video!

Well done sir! Nice fabrication

You are a gennie a$$ and I mean that in the best possible way, you are my hero, man, great job!

Thank you for sharing!

Nice simple design. If you can drill rocks. You can drill anywhere

Просто молодец! Буровая ,это инструмент а опыт придет уверен!

Nice Rig by the way. I come from a semi arid area in Kenya and i would like to build me one of these in the near future so that i drill wells in my community as a way of giving back to them.

THats very cool. Overkill if your just drilling one. It’s nice that 240 is your standard.

Keep trying it takes a long time to learn well drilling I did it for 4o years I was still learning only thing is electric an water don't mix dangerous

Красава Димон, ща пойду такую мутить. Спасибо большое за идею.

It is a very useful device, especially in times of water shortage. I wish I had something like this.

C'est inspirant et magnifique 🥰

Perfurador Bom bem reduzido fácil para transportar e instalar.

nice setup

Fajny film 👍👍👍

You tried your best. I know you will do it perfectly next time 👍

Well done 👍 No pun intended.

I would definitely back-ream every joint before I made a connection. It’s just good practice that is worth the extra minute.

Inspirational video actually

Nice job sir

Excelente trabajo felicitaciones!! Quisiera saber de cuantos HP es el motor que hace girar la mecha, Un abrazo desde Uruguay

Great just a question where did you get the motor/gearbox assembly and the connection part water inlet pipe? I mean i want build one my self thanks

Amazing ingenuity and build quality. Can you tell us what brand of electric motor and gearbox you used for this machine? Thank you.

Muito lindo!

Is very good,,,bro....

Que habiloso eres amigo.. 👍

Excelente maquina diámetro de tubería es el adecuado para esa máquina

It's an excellent machine, I want to buy one like it, where can I buy a machine like this

Good jop with good skills

Zo'r ixtiro xalqqa foydasi tegadigan

I think you may have been nearly there. Water settles in the gravel layers, so if you were getting only gravel you were somwhere near the right place. Bear in mind you might have to go through gravel layesrs to reach the right one. Its a good idea to talk to others in the locality and find out if they have a borehole and how deep they had to go.

I ran rigs 40 years ago after a couple of wells you get the hang of it. It’s not that complicated. Especially after you drill wells with a thousand pounds on them.

that model of drill is very good it is well done how can I have all the manufacturing data

Very cool

Great job 👏👍👌🙌 what is the maximum depth & what diameter

Thank you for sharing your project... If you don't mind, the hp of the motor and the gearbox and output speed rotation of gearbox.

My greeting well done

wow veery very nice

I too spend some years on drilling rigs, and love how you managed to get to the core of the drilling process. I think you could use it easily also to make vertical geothermal wells for home use with a heat pump. Can you tell what max depth you reached?

Greetings. What are the details on the motor and gear reduction, winch rating etc. Thanks!

Very nice looking drill. I know your first hole did not work, so what about another one ?

What pipe thread NPT or ?. I made mine with an two -person post hole digger. It came with an engine and transmission that help with torque. I had to buy a water pivot but worked down to 100 ft no problems. Most problems occurred with the pipe

Where did you get the water swivel and the motor assembly?

Hola buenas noches, felicitaciones tan bonito invento deseó que me compartas la información de motor

I’d like to build one, can you share the tech drawing please? Also for swivel it should be bought correct?

Design can be little modified to drill fast and in hard or rock strata, just use the rope of winch in loop so driving forward n reverse you can further force the drilling, but in rock you would have to change your drilling bit

Nice

Where did you source the motor and transmission?

Nice sir

Can you share the specifications in detail? I am very interested in making a water drilling machine that is very simple and easy to use Thank you and Greetings from Maluku Indonesia

Nice job indeed. You can get an estimate of the water table anywhere in the world using google map, it requires a bit of ingenuity though

Bravo

Good Job love the skills .. what's the power of the drilling motorgear ? and the pulley one? thanks a lot for sharing such good job sir !!

What we got down there?..Yella nugget??!..😂

Where did you get the gear motor and what are it's specs and partnumber? Same question on drilling pipe?

From Dominican Republic

I made a machine similar to that but I have a problem because where I live is mud (muddy from which the water comes out with a bad smell) I have had landslides and the water is lost I don't know what they recommend to me to be able to make my well I already bought a small window but I haven't tried it yet

Awesome build dude I hope you help people out by drilling some wells for your community, obviously do charge for your work. if I might suggest something similar to a lathe steady hear the bottom to keep the rod spinning true would help keep the hole straight.

Dear brother, can you inform me abou link order Motor 2.2KW includ gear box ???

Asta cuántos metros de profundidad puedes perforar la máquina

Amazing! I would like to build this. Do you have a parts list for this build? Thanks!

The design is really cool.. did you make the water swivel as well ??

nice job my friend!i would like to ask you:are you sure that rpm is 60?i count 120rpm,secondly what is the size of the pipes??thank you!

how much can that installation cost? I'm interested..

what depth can be drilled, how much does it cost and how to order from Indonesia

What kind of pipe is used for drill stem can regular steel water pipe be used

does anyone know what that engine is called?

Did you buy this motor ready? You made it with your own hands...a good and beautiful job

What are the specifications of the motor and gearbox?

Kada dodjes do tvrdog tla, stene, umesto vodenog pritiska koristi vazdusni od copco kompresora, jeste skupo ali takvo je resenje.

Nice work, could this setup be used to drill solid bedrock? Rotary hammer?

Put a link to all the parts needed for the build

Класс . Хорошее решение

Great Build, but how much can drill the machine? If you can guides me with the max capacity of drilling can be great. Thx for the guides

muy bueno

Where can I buy a machine like this

Do you have a drill kit or materials list with links to make or buy the drill used? What was the final cost?

What is the power of the engine you used

Very impressive. Is that 3 phase motor? If it is what generator you will recommend to run in USA ? Thanks .

How did you build the drill stem water port

How many meters does he dig? And how many inches of water does it take out?

You need bentonite to stabilize the hole

buenas tardes desde colombia como puedo conseguir informacion sobre esta maquina precio y si perfora rocas

Amigo qual à redução do motoredutor falo aqui pelo Brasil Araruna Paraná.

Is machine se 260 foot boring ho jayegi Ki Nahin

Good idea but if Rock stone will be there what you do how to drill the Rock 🪨

How do we get this device?

Any chance showing us the water swivel build please.

i like this product of water well drilling rig in tanzania, can i get it ?

GOOD

good job! can you tell me what kind of drill you use when you get to a layer of gravel? thank you

How do you make that water swivel?