Thank you for your helpful demo. I have a few comments that might be helpful for anyone out there who is interested. I had never used mod podge before, but I have used puzzle glue. I decided to try the mod podge this time, and I was very happy with the results. First of all, regarding durability, I found it to be much better. It takes a lot more puzzle glue to get a sturdy finish than mod podge. Secondly, I purchased a styrophome brush to avoid the brush marks. I also got the matte finish mod podge instead of shiny. it did not leave any brush strokes at all! Lastly, I glued the puzzle on my kitchen floor without anything underneath. There was zero damage to the puzzle, and the glue wipes right off the floor. All in all, the mod podge is great!!

you didn't see brush marks with the puzzle glue....... Because you didn't use a brush!!

ok now apply the mod podge with the spatula

i use mod podge for a lot of crafts and for my cousins birthday this year i found a really adorable puzzle and glued it together using mod podge. with mod podge it is a sealer so it is very thin so it does go through the puzzle easier but if you put down a plastic table cloth the damage to the puzzle is so much less. plus to avoid stroke marks and not getting glue on your hands use a sponge brush instead. I hope this helps with mod podge users!

I generally use foam brushes with Mod Podge and then you don't see the brush strokes.

You can apply the mod podge with the spatula and it will be "smooth and shiny". Also use baking paper underneath to prevent the damage. And knowing that mod podge is nothing but white school glue with water and fancy name you can just glue it with the school glue thus going even cheaper.

For Modge Podge you mentioned it left brush strokes do you thing you could use a credit card to get the same method as the Puzzle Glue?

Now try pulling the puzzles apart. Then you know EXACTLY what’s happening when it comes to how much glue soaks into the puzzle. Also use squeegee on application of both products to be fair on half the puzzle, then on the other half of puzzle use brush on both products. This would net you a real world comparison without bias. Then a person can see if it’s the tool or if it’s the product having better self leveling properties. But what do I know? Obviously nothing otherwise I wouldn’t have watched this video! Lol.

I use a applicator, like the one you used for the puzzle glue, with modge podge and it works the same. No brush strokes it sticks a little but that just like with any glue depends on how much you use.

You can apply the mod podge with the same tool you applied the puzzle glue and end up with the same results. If you put the puzzle glue on with a brush it would leave the same marks. Applicator is the clue.

Thank you, very helpful video! !

Yup. next time use the applicator with the Mod Podge and the strokes will be a thing of the past....

Thank you so much! This video was a big help!

Use an old credit card as an applicator if you don't have one. Won't leave those brush strokes with the mod podge.

Wouldn't using wax paper prevent any damage?

You can also use cheap school glue from the Dollar Store. Just water it down a tiny bit and it will do a great job. I suggest you also glue the backs of the puzzle AFTER you glue the front and allow that to dry. No weaping through and it holds better.

I wonder if you used a scraper with the mod podge instead of a brush it may be different?

is it okay if you use the puzzle glue applicator tool or a credit card to spread the mod podge rather than a brush?

hello there. I have a puzzle that glows in the dark if I was to glue it wouldn't ruin the glow-in-the-dark feature do you think?

Erm... just because a brush is supplied, it doesn't mean you need to use it! The difference of being able to see "brush strokes" is silly - that's comparing the method of applying the glue, not the glue itself.

My modgepodge(not for puzzles) dried white. Is there any way to lighten it or remove some?

thank you!~

If I want my puzzle to stick to a foam board backing will the seepage of the glue hold my puzzle on it with out me adding more glue to the back of the puzzle after it dries?

I had no idea how to glue the puzzles! Therefore, yesterday I went to Michaels & purchased "Peel & Stick puzzle saver & also a frame. Now that I learn how to do it, how should I frame the glued puzzle? Should I put the puzzle in between glass & back cover?

Those puzzles are super thin so this is not a great example for most puzzles. But i did use the mod podge with the spatula.

I use a Plastic applicator with the MOD PODGE. And more glue going onto the underside, I see that as it is simply going deeper into the puzzle. Making it more secure, or GLUED. But that is just me.

Also if you’re trying to send a puzzle that is 500 to 1000 pieces through the mail what is the best way to send it where it will not get crushed

Has anyone tried using contact paper or package wrapping tape on the BACK of puzzles instead of messy glues? Just wondering.

You had brush stokes on the dried mod podge puzzle because you used a brush & you used a scraper on the puzzle glue.

do i use matte finish mod podge or gloss mod podge?

Just use the plastic applicator for either one. Or a credit card, or a cassette tape case. Or the side of a soda can, or any other smooth object.

Is it alright to use PVA glue on a puzzle?

Just buy some school glue from the dollar tree and paint it on both sides. Dries clear and doesnt cost an arm and leg. You can use one of those netspend cards they send in the mail all the time as a “squeegee”.

Do a third test with less expensive "white glue".

Isn't Mod Podge much less expensive than puzzle glue?

why not glue the back?

I just use my hand to spread it around works perfectly

You can get good Jigsaw puzzle glue at Dollar Tree for $1.25 (Canadian).

you have sturdy puzzles because that’s a smaller puzzle but the puzzles that my daughter does are 500 to 1000 pieces and we were told on KZfaq to use school glue because it’s cheaper but it doesn’t give you that sheen…

I would’ve thought it was common sense to put something protective under the puzzle to protect the surface and apply more than one coat so it could be really strong. That seemed kinda flimsy.

Quit using el-cheapo puzzles for demonstration!

She must have been a Hillary supporter.

Hi and thanks for the great video. I used Mod Podge 'Matte' and a credit card for application. The result I got is amazing! I'd say it is as good as yours with the Masterpiece glue. A very good alternative if you're after a matte and virtually invisible finish. I'm framing mine so I didn't want it extra shiny as the glass will be shiny enough.

This was super helpful! I'm about to glue and frame my first puzzle and your video really helped! Thanks!

A foam brush works with mod podge and wont leave brush strokes either. Often, brush strokes are visible due to the layer of mod podge being a bit thick, or if you brush over an area that has already begun drying and become tacky. That issue is totally fixable. The seepage through is interesting to see. Perhaps because mod podge is a bit more of a liquid consistancy than the jigsaw glue?

Thank you, I wanted some clarity on these glue.Nice art puzzle for kids room.

Great tutorial! I'm glad I stumbled upon your video because I was wondering the same exact thing because I'd rather buy mod podge than a specific glue but wasn't sure. Thank you :)

To get the Modge Podge even, I like to apply the layer then go over it with a old credit card to completely smooth it out. Pretty much how the applier tool works for the Jigsaw puzzle glue.

If you don't use the same method for application, it is not an accurate comparison.

I use mod podge with a sponge tip brush. It doesn't leave any strokes that way.

very good comparing video

thank you ! the mod podge is easier to apply because you can use a brush (more control)i've used both and i prefer the mod podge

Would you rather use the clear puzzle glue or mod podge for a 1,000 piece puzzle? I've heard you can see brush strokes with mod podge, so would it be best to use a card to spread it?

And also put wax paper underneath when you apply the glue and nothing will tear off the bottom of the puzzle.

Why didn't you use the applicator tool for the mod podge? I feel like its possible to avoid the brush lines if you used a strait edge like the applicator.

Hi. Have you tried using Elmer's glue in gluing down puzzles? Also, what's the title of the song you used in between your video? thanks

WOW, it's harsh in the puzzle world. Some people must've been exposed to the Vapors of the Glue. ha ha. informative tutorial. thank you

awesome thank you...i wont how the mod podge would hold up on a glitter puzzle?? I have a fairy puzzle that has alot og glitter on it and i wont if it will still look nice and glittery...or will the modpodge take that glitter away....

If you used the spatula on both it would of been a better comparison. But I believe you would get the same result if you were to use the spatula with the mod podge as well. I prefer to use school glue (white or clear) slightly watered down. Same results as if I were to buy Mod Podge for $5+ & it only cost me $1.50 max.

Why can't you use the applicator on the mod podge? I mean you don't have to use the brush and the result would be almost the same if you used the same tool.

What type of mod podge

put the puzzle on Wax Paper, use the flat applicator for both.

if you had brushed both on or use the spatula tool on both it would have been a better comparison ( no reason u cant brush the "glue on" and no reason you can not "spread the mod podge on"

So is it ok to use mod podge

you are supposed to do both sides as well. thanks for the video. And don't pay attention to the haters on comparing brush vs applicator.. you were just using what came with the kit or was instructed. thank you for the video

First of all,, Mod Podge does have a specific "PUZZLE SAVER" liquid! So why use Regular Mod Podge? Why not use an applicator tool [or Palatte Knife] with the Mod Podge? Had you used the brush on both, they BOTH would have had brush strokes. Why not simply use an applicator tool on them both so there would be an equal balance? OR why not use some kind of an Art Resin to preserve as an alternative. Lastly, why not use a high MIL plastic under the product instead of a paper product? When using a good MIL plastic, nothing will stick to it, and can be reused over and over again.

I love the puzzle.I will buy Puzzle Glue and Mod Podge soon.:-):-DThat is very interesting.:-):-DWow!! I'm not sure wich look I want more.:-(:-)Hmmm!!

It looked the same I didn't see anything wrong with either

2:56 I had my phone at full volume and this scared me.

Maybe you should of used a foam brush

The best way to glue a puzzle is to turn it upside down and spray it with SPRAY GLUE. Then you glue a thick paper on it and it's ready!

You are supposed to put wax paper underneath the mod Podge and use a credit card🤦🏽‍♀️