Mod TEST Custom HSS HDPE Chute Deflector Snowblower

Mod TEST Custom HSS HDPE Chute Deflector Snowblower | Honda HSS1332ATD

Рет қаралды 33,341

3 жыл бұрын

Part 4 - Wet heavy snow testing of my new custom HDPE chute deflector i have redesigned for stray discharge control on my HSS 1332 ATD. Part 2 was my original was made from teflon which worked very well.
Part 3: • Custom HSS HDPE Chute ...
Part 2: • HONDA HSS1332ATD IMPRO...
Part 1: • HONDA HSS1332ATD Custo...
Buy MY custom HSS chute deflector here: www.ebay.com/itm/373442763126
+Stay tuned for more videos...every Tuesday & Friday!
+Further SUPPORT the channel by purchasing ANYTHING thru my Amazon links below:
WD40 White Lithium Grease: amzn.to/37hLJbw
Honda spray cleaner: amzn.to/36J5l7h
Husqvarna Drift Cutter Kit: amzn.to/32Q1SCA
Oxford Heated Grips 1" bars: amzn.to/35BOtzR
Honda Poly Skid Shoes: amzn.to/3nAvN9M
Honda Steel Skid Shoes: amzn.to/3pwgZuV
Honda Cold Weather Cab: amzn.to/3lKKM0C
SUB & DONATE Here - / johnfranconh
FOLLOW - / contemporary_homestead
+ & HERE! - / contemporaryhomestead
Contact: JohnFrancoNH@gmail.com
Thank you to the following artist(s) - Music info/credits below:
KZfaq Music Library

Пікірлер: 79

@imdeplorable2241 3 жыл бұрын

It appears to work very well, John. Great job.

@danconlan8735 3 жыл бұрын

Your mod works great John!

@lout8537 2 жыл бұрын

Hi does the machine go any faster ? ? It seems very very slow. I have a older Ariens Pro 26 inch I am looking to get something bigger to get the drive way done faster. But you are barely walking.

@chriswagner6310

Very cool my friend

@user-if9rg5sl8w

Seems like your chute is out of stock? When are you going to be making more?

@normsatv 3 жыл бұрын

Got to love honda snow blowers i have one also only thing can say is which honda made the track machines have lil more speed bit to slow when walk behind .

@jeromeprzybilla9999 3 жыл бұрын

Great job on the chute mod, to me, it looks to be doing what you intended it to do. I often wondered why the snow blower manufactures don't have the chutes set up like that. I took my new Toro 1428 out for the first time yesterday and I got covered as well as the snow blower with fine snow that was being discharged just from the bottom half of the chute.

@rickmuir7616 Жыл бұрын

Enjoyed watching the video about how collar in the chute causes it to plug up. The other video where you added a piece of UHMW to block any snow blow back. Doesn’t it plug up as much under a low snow condition? I was thinking if your just block blow back, would a flap that hangs at the front edge & from half way up the chute. It is allowed to swing free to just above the housing exit. Would be easier to clear if plugging happens. Your thoughts!

@georgekeefe9178 3 жыл бұрын

Like the mods but do you see a problem clearing a clog if it does happen?

@superquig7068 2 жыл бұрын

Nice video! I just purchased a 2021 model. They say it has the fixed chute. I was told by the dealer that the new 2021 1332ATD now has the same chute as one of their other models (I don't recall which, but it sounded like a big improvement).

@Peter-976 3 жыл бұрын

I thought one of the reasons for the redesign of the collar was because it was causing clogs. Have you tried it after you cut the collar without this plastic?

@cabbie1106 2 жыл бұрын

Hey John I have the new chute Honda designed for the anti clog would I have to cut any of that for this deflector to fit in as I see people are selling these on eBay!!

@joeschmitz2790 3 жыл бұрын

Hopefully Honda sees your new design!

@craighamelin Жыл бұрын

What skid shoes are those on that? Does not come with the side ones, correct?

@gabelanger 3 жыл бұрын

Sounds like machine is hunting, carb may need to be cleaned if your using choke to get machine to run smoothly time for small tune up. she's got a mis. The mod came out great may be time to swing into full production ))

@harry100026 Жыл бұрын

Hi John. I just got this snowblower. The manual directs that we use premium fuel only for the engine. From your experience , do we use only premium fuel or is it ok to use regular fuel for the engine? Thanks.

@js-wq6zy Жыл бұрын

Did your chute mod affect the sound harmonics? I find the impeller "fan" noise irritating and it even comes through on your video, although it might be the result of the tiny chute throat from the impeller.