I also have a 2015 dr200s and have been so disappointed that there is such little content on KZfaq about it. Love to see this bro.

Cheers for the vids, enjoyed them all. One of the nicest dr200 I've seen.

Thanks for doing these videos on the DR200!!

Just watched the whole series. Absolutely loved the videos!

DRZ400 with a lectron carb. I have a DRZ super moto and love them DRZ vids!

Instant sub! Cant wait to see what you do to yours

Good job for your bike bro, I’m waiting for mine also, I will make some of that tuning ❤️🏍

Please make more videos on the 200. Great information is really liked. Thanks

Good job keep them coming love the build Im going to have to try that carb on mine.

Love the small bore bikes! Let's see some TW and mini bike vids, then race the 3 of them.

Great job with the video. Keep it up.

Great vid love the bike

Great Job! Helps me with my dr 200 Thank you

I’m enjoying the vids

Great job on the dr200 looks awesome! Are you going to make a follow up video with a review of the nibbi carb you installed? Is it worth buying or have you had any issues with it?

I know you've probably already sorted the air box fitment issue but - if you have some room to play with, and you should, disassembly the carb and get a machine shop to mill down the airbox mouth a few mm. As it's tapered, it'll fit with some squeezing.

Hell yeah your the best man

I already want to build one like that😍🔥

I use 26mm version of this on a pitbike and it really is a great carb I'll never waste money on a mikuni again lol

Hey man, I’d love to see someone put a kick start on the Dr200s I got an 09 Love how good your dr looks man Def future mod ideas

I just wanted to tell you keep up the good work. I think you have an amazing Channel and don't run it into the ground

This carb is one of best mod for dr's/ Also for 125 and 150. I'm tested it too./

Well seeing how well this worked for you I may try the 26mm one for my mod 50 with 108 stroker(wish they had a 24mm though in the pwk style). I saw these but not many good thorough reviews. May try the same one on my 200 as well later.

I've loved following your progress in these videos, and appreciate both the work you've put into the shows, and the info you put out! Thanks for that! Gotta ask...... I have a '97 I got cheap, but other than cosmetics, they're pretty close to the same bike. What rear fender are you using?

i bought a grom clone instead of this, and am amazed at the after market. engine swaps, tons of parts that fit groms works on it with little fitting, i had planned to get a zs 212cc for it, but have since went full yx 140 top end with a z40 cam, nibbi 26 carb,, an exhaust for the grom, i have about 2300 bucks total in my bike and it runs amazing , topping out at almost 70 , i love these little bikes. its too bad there isnt more performance aftermarket for this bike, beyond exhaust , carb and jetting upgrades . i really wanted one for a minute, i seen there are some cam and head swaps for these, but nothing that is a significant upgrade. i have no doubt these are great bikes tho , just if you want to tinker and do mods, it doesn't seem like there is much available. im saving for a 19hp zs212 for my clone, and at sea level with some tuning many have got 20 hp out of it, and this is on a much lighter bike, granted i have no interest going off road or using it as a dual sport. i have no doubt this bike is superior in every way if you want a bike for that purpose though . this is probly the perfect motorcycle if you want a ds , and have no intrests in modding it.

Would love to see what you'd do to the tw200! I wonder if the carb and pipe would wake that motor up like they did with the DR.

Dude just purchased a 2003 dr200se. After ordering a carburetor from ebay for 50 bucks and it was leaking out of the float bowl over flow right out of the box I decided to buy this nibbi from this video. The nibbi carburetor pissed fuel all over. I took the bowl off and the floats wouldn't even shut the fuel from coming out with me holding them all the way up. Poor quality crap that I'm shipping back to Amazon. Good video though.

I'd watch anything, but the mini bike would be sick to see lol

Ooooookaaaaay we need part 5 now

The tw 200 would be fun to watch

Let's see how she runs, I wanna see a from stop, top speed and maybe some wheelie action!! Got an 02 im tryna work on now!!

I tried two of these carbs and they both overflowed as soon as they had gas in them, IDK why, I hooked them up the same as the OME carb. the 32mm fit better then the 30mm, But its a very tight fi to the airbox. great series though!

Thanks man

Hey man, I saw somewhere you could slide CRF 150R fork springs in that bad boy. Also heard that maybe DR650 rear shock would fit too, making the bike a little more firm, nah mean?

Hey can I ask where you would get a service manual or even just a users manual? I just bought a 2018 used and it has no manuals lol

Hello. When adjusting the idle throttle, is it normal for the carb throttle gate to sit about 1cm open?

I'm from hammond La, ,that's where I am, ,,I could tell by the way you talk that you was from here,,,oh yeah I'm running a nibbi 24 mm on my motorized bicycle engine it's sick I'm just under 100cc and I'm in love with my nibbi ,,the hell with the mukini

Hi. How did you get on with that air filter side? Was the carb throat too big for the filter or too small? Did you manage to sort it out. Thanks.

Doing some research it seems a lot of tuners are settling on the 26mm PWK carb on these

I tried pwk flatslider 28 mm carburator with 62mm bore . Issue is twisting throttle it's boggs. Jets using mj 115 and pj 32

You should do a top speed video I would definitely watch a ride compilation if you put one out

just find your channel, great job!, Would you evaluate to adapt a diferent mask to that dr200? Regards from Perú

Hey man just got this whole set up on my Dr200 how did you end up getting it to fit the air filter side Did you have to take the screw mounts off of the air box and move the air box 1/2 inch up ? Mine seems to be running a little short and really want to keep the air box’s on instead of a pod filter

You went 13/45 sprockets in the beginning. What was your top highway speed before any of the other upgrades? I'm trying to set mine (01 Dr200SE) up for trails but want to be able to reach 70. Please lmk, thanks! The DR200 community really appreciates these vids.

Can anyone tell me where the break line ends up going?

Honest question for an honest answer - I have a DR200S I take out on less travelled goat roads and use it to flat tract at practice days as well. (I've lightened it up) *My question is in hindsight was there much difference in your first Jet mod with CV Carb vs the Chinese Nibbi mod ? Also be awesome to do an update on your changes, even if you have sold it. Thx for the Vids - wish you would pump out a few more. Hope all is well!

I have a 125cc ice bear and just ordered a 26mm nibbi carb, what jets should I use?

Do you need the new cable? Will the standard cable work on the nibbi throttle? Can’t find a nibbi cable in the UK

Just found your channel! I noticed you have street tires on your bike. What size and brand are they? I am buying a 2015 this weekend and might go with street tires too.

anyone know how to make that seat more comfortable and wider?

Hello friend, I ask you, do you think a 30 mm carburetor or the 32 that you use would work?

When is the next DR200 owners convention? Was actually looking at that carb on amazon, but one slightly smaller like the 30. I'll be interested to hear your experiences with the 32! Subbed

Hello, your old carburetor didn't have a plug that went to the control unit?

Amigo que marca es la pieza que usaste para el aselerador la de darle gas qie marca es ?

What throttle did you use? with the original carburettor to make it shorter, ... regards

Will it work for a 1998 Polaris trail boss 250

You have the link Where you take your chain guard

Where did you hook up the gas to?

Are you done posting videos? How bout a follow up on the dr200. Good video thanks

Would you do a rear disc conversion??

where did you get the plastics from?

Donde puedo traducir lo que dices y donde puedo comprar esas modificaciones

Can you use that slip on muffler on a 2001? And if so what is part number

How did that particular carb work out for you after riding it some time? Those Nibbi carbs are super hit or miss - their quality control has been suspect in my experience.

Do a nibbi on a drz400s. It is a much more popular bike and greater video potential. Nice job!

Will this carb fit an 08 model?

I run 130 with rod, cam, an heavy springs

BONITO DISEÑO, PERO NO ESPLICAS COMO TIENES LA LAMPARA DE ADELANTE EN MODO OSCURO ME GUSTARIA PONER LA MIA DE IGUAL FORMA.

Hey what petcock did you use

Hello friend, I ask you, do you think a 30 mm carburetor or the 32 that you use would work? Te felicito. Tienes una dr preciosa

how about making the bike lighter and adding an oil cooler. thx great video.

Waiting to see where you are at on the fine tuning.. Debating on Getting that carb instead of a rebuild kit

from toronto canada how it the nibbi is a good one

Do something with the forks or a big front brake kit. Our brakes suck😩 i have an 2005 dr200se

Need a video of this on the street.. Hope you are ok

Ya. Pod filters suck if you go through water puddles.

Any follow up riding videos with the nibbi?? I’m very curious as I’m not impressed with the cv with the mods on it.

Помогли ли проделанные в крышке отверстия???

How much of a power difference did you get with these mods.. night and day difference ?? I love your channel hope you get more content out !!!

What headlight is that? Or is it in a previous video

What kind of top speed to you get out of this with the exhaust and carb upgrades?

Muy bueno

Awesome videos! Am I write to assume that I couldn't use the existing throttle cable? Replacing that and the grips seems like a pain. Thanks again.

Let us know how it does on the highway

What tail bag to have on your dr

Nice build, do you think that nibbi carb/cable and throttle was worth the price?

Hey Caustic what jets did you settle on in the 32mm carb?

Bro great videos with good info on the Suzuki Dr 200’s , I have a 2009 dr would that new carb work on mine?

Did you record removing the exhaust baffle

Where do you get your plastics??

COME BACK!!!! Newer riders need your assistance!

It needs a digital speedometer next bro

Great vid 👍, is that oem plastic or aftermarket?

friend greetings from Venezuela, I want to know what are the codes of the things you have mounted if you can help me, for example the handlebar, and if it is worth the change of the carburetor for enduro use. I am going to change the exhaust, I want to know if the holes made to the cover helped too. Thanks, very good bike.

Put Hyosung 4 valve head cylinder..

Milwaukee drill 😁

Since there isn’t a follow up video I’m guessing he blew it up

Put a kick start on it

Updates!

Im so gutted this man has not posted in over a year, WHERE ARE YOU :((