hello sir, breach , catch and spring for retaliator elite link can't be found already , any new updated links? thanks,, ( get well soon my friend ).... : (

Time really flies doesn't it?

Thanks, I figured I'd have a bit of fun and the thought of joking about smashing open a blaster hit me, lol. Now on a serious note, if you're going to mod your Retaliator, you can do this, and then add Worker's expanded plunger tube and plunger rod (the ones for the Prophecy) and get serious performance without going broke. The expanded plunger tube would require some cutting of the shell, so if you don't want to do that, this quicker mod will consistently get you around 120 FPS.

MongooseJake Once again, thanks Snake man. Looking forward to your future content.

Those simple mods really help, but whenever you can, toss in the Worker breech. It has better contact with the darts and provides a better air seal. Great gains for only a few bucks!

Rewatched it and you talk about that. that's what I get for skipping parts xD

@@kittenclaws5775 No worries, I figured that people would have that question, and that's specifically why I decided to show the difference. If you resealed the stock breech, you'll gain performance, but the extra contact that the Worker breech has with the foam dart makes a huge difference. Keep in mind that the Worker breech is under $3 and takes just minutes to install. It's worth it alone even if you're not doing any other upgrades!

Just a mag adaptor really. Once you get rid of the stock breach you remove the issue. Half lengths won't touch the AR, so it stays closed when using a stock blaster. Using a aftermarket or custom made breach gets rid of the AR altogether, so no worries!

A better option is to replace them with the Worker stock attachment point. A bit sturdier and only a couple of bucks most places.

Glad to help!

​@@MongooseJakeNerf​im going to try it out but orange mod works is out of spripns i think but 5kg's

@@owwwgaming978 You can always run a different brand of spring. Any 7 or 8 kg Retaliator size spring will do the trick!

Most Worker parts retailers should have them, NFStrike just used to be quite a bit cheaper but had longer wait times on getting your parts. Out of Darts is an option.

Absolutely, as they take the same springs due to near identical internals. The Recon MkII is quite simply a variant of the Retaliator. It just happens to be my favorite over the original.

I personally also use Worker's version, it's a bit lighter but works well.

​@@MongooseJakeNerfwhat sort of lubricant can i use ??

5 or 6 kg would do it.

Yes, the BlasterParts kit would be my go-to for the Rampage. Planning to do one of them myself sometime this spring.

So can you do a video on the eat, it’s not buzz bee but it would be cool

@Barry Keating I guess I did lol

Well, both internals are 99% identical. Only real difference is the Recon MkII has holes in the breech to reduce FPS, but the Worker breech is superior vs both the Recon and Retaliator. Dart fit is hugely improved, which helps the efficiency of any other mod you plan, even if it's just a spring upgrade.

@@MongooseJakeNerf thank you very cool!

@@MongooseJakeNerf hello sir where Can I buy the worker breech?

@mongoosejake looks like links are all dead and nfstrike no longer sells the parts do you know where we can get these parts now?

Yes, completely cross compatable.

Not right away, but it can become a issue down the road. Eventually a replacement bolt sled as well, but not needed right away.

@@MongooseJakeNerf OK thanks a lot

You remove the locks specifically so you can de-prime the blaster manually to avoid dry firing (firing with no dart loaded). It also helps you if you have a jam and need to manually cycle the blaster in order to clear a jam. The only reason to ever leave locks in is on stock blasters that kids are going to use.

7 KG

Sadly NFStrike stopped selling most of the parts for modding Nerf, but Worker still makes them, just have to search for other sellers such as Amazon, Monkeemods.com, outofdarts, and lots of sellers on ebay or etsy.

@@MongooseJakeNerf thank you. Still loving this video... Been looking at metal barrel extension with a cs-6 barrel, but what is the best size piping ?? Please

Thanks for watching Gabbi!

+MongooseJake You're welcome brother!!

Thanks, I haven't used that one much, but I'll keep rotating it in once in awhile.