Modeling a LOW POLY NISSAN GT-R R35 | Blender 2.83 Complete Tutorial

Рет қаралды 210,728

Күн бұрын

In this video I model a Nissan GT-R R35 in Blender 2.83. Pretty much the entire process is included with a minimal amount of editing to show every move which is why the video is a bit lengthy. I hope it can provide some useful tips when modeling low poly cars based on real life models.
I will be practicing and refining this process myself and my ambition is to model cars at this level of detail in less than 30 minutes from start to finish. I'll make more videos on this topic as I make progress :)
I'll add the blend files (10 versions saved throughout the tutorial) for "Tutorial Tier" on my Patreon Page:
/ imphenzia
(All of the music in this video was composed by me and it can also be downloaded from my Patron page)
Timestamps:
00:00 Intro
00:45 Blueprint Setup
05:30 Blender Addons (Extra Objects, F2, Loop Tools)
06:15 Modeling Start - Side of car
16:25 Hood, Roof, Trunk
23:35 Front and Headlights
27:35 Back
31:40 Colorize Car
34:45 Wheel Arches
35:40 Wing
37:50 Underside
42:05 Wheels
46:05 Rear View Mirrors
48:17 Tail Lights
51:05 Exhaust Pipes
52:05 Detaching Doors, Windows, Trunk
53:45 Interior (approximation)
1:02:40 Solidifying doors, windows and trunk
1:04:00 Splitting doors and windows to Left / Right objects
1:06:00 Pivot points for doors and trunk
1:07:56 Outro
New Imphenzia Merch is available:
teespring.com/stores/imphenzia
Learn Low Poly modeling in Blender - all methods I use in one video:
• Learn Low Poly Modelin...
Official web site:
www.imphenzia.com
Twitter:
/ imphenzia
My Itch.Io page with all my Ludum Dare games:
imphenzia.itch.io/
Imphenzia Discord server invite:
/ discord
Imphenzia Split Left/Right Blender Addon:
www.dropbox.com/s/uxl9vegpikb...
GTR

Пікірлер: 310

@discreet_boson 3 жыл бұрын

Tip: use ctrl alt q for quad view

@Imphenzia 3 жыл бұрын

Argh, why didn't I know that?? Thanks for the tip :)

@discreet_boson 3 жыл бұрын

@@Imphenzia you're welcome ☺️

@codeinclined 3 жыл бұрын

Holy cow! One of the best tips I've heard in a while, thanks!

@antapology4502 3 жыл бұрын

Tip: In 2.79 this asks you to quit Blender

@iamaj7 3 жыл бұрын

@@edh_ he said ctrl + ALT + q, not ctrl + q

@Jaakeup 3 жыл бұрын

that's a great quote at around 25:00, "It's always a compromise, low poly, you can't get every line so find the one that's the most important" I truly believe that learning low poly is a huge advantage for beginners because they can get used to the idea of getting a base shape first before going into detail

@FinalDriveGame 3 жыл бұрын

Gotta learn low poly before you jump to detail. Sure anyone can buy the cgmasters Corvette tutorial series, but it doesn't seem to teach the fundamentals. Just leads to people constantly begging for tutorials

@zackakai5173 2 жыл бұрын

^^^ That in my opinion is the single biggest problem with the way Blender is taught to total beginners. Modifiers like the subsurf are amazing tools for more experienced modelers, but most Blender tutorials aimed at newbies teach them to become over-reliant on the modifiers and they become a crutch to work around a lack of basic topology skills (as evidenced by the large number of help threads around the internet of people asking why the subsurf modifier "isn't working" on their mesh consisting entirely of N-gons and poorly-spaced edges).

@ivan210 Жыл бұрын

This is best tutorial / "copy from me" style Blender videos on whole YT! Thank you very much for sharing! I learn ALOT when watching!

@clivejimenez7596 3 жыл бұрын

Really enjoyed working through that with you. Thanks for taking the time and effort in sharing your experience.

@yans3113 3 жыл бұрын

Huh, so concentrated and effective! Sometimes learning must go in quick way to avoid hungups and frustrations. Errors in the beginning of learning is not that important. Just polish workflow algorithmically and errors will decrease gradually. We all must seek personal quickest ways to optimise workflows. If you seek u will find! And I find too. Thanks for some impressions u made. This is right way to do everything. U've got subscriber.

@thejonofalltrades 3 жыл бұрын

This really helped inspire me with some of my own projects, great video!

@bogdanboata2836 2 жыл бұрын

I cannot thank you enough for this tutorial. I love this car and being able to make in low poly is really useful for my own projects. Learning a lot from your videos, cheers!

@sean321 3 жыл бұрын

Your videos are fantastic! Not many channels with such clarity & easy to follow steps - on blender & unity. Much appreciated

@Imphenzia 3 жыл бұрын

Thank you, I'm thrilled that you like them :)

@FlamerK6 3 жыл бұрын

I'm currently working on a low poly racing game and these videos are a godsend. Thank you so much for these!

@devex4589 3 жыл бұрын

Thank you! I appreciated this step-by-step tutorial on how to model a low poly car. Followed your instruction exactly throughout the video and modeled a low poly car. I've modeled cars in the past, but definitely NOT as good as this one. I hope to see more low poly car tutorials on your channel! Earned yourself a new subscriber as well.

@gamedevstanislove 3 жыл бұрын

It turned out amazing) with such a low number of polygons, it is immediately clear what kind of car is)

@lesotho886 3 жыл бұрын

Since the last one week of watching your videos i learned so much even made my own 3d models they look epic💪

@ammarwael8993 3 жыл бұрын

yep I was waiting for this from a long time I really enjoyed watching it keep the fun and useful tutorial videos =D and the music is very peaceful =)

@SiMBol10 3 жыл бұрын

Probably the most useful video I've found for what I'm trying to do! Thank you!

@NervusEnergy 3 жыл бұрын

You have excellent technique and great communication skills, I always learn so much from your videos. Thanks for this one; I'm going to do my son's S2000 when I get home today! :)

@andersnissen3062 3 жыл бұрын

Perfect tutorial. I would love to see more of these in depth videos on making more complex models.

@herobrineslayer1585 3 жыл бұрын

You're amazing! This video has taught me so many useful things and I was able to create my own Audi R8 that looks great.

@coreys2686 3 жыл бұрын

ctrl RMB also extrudes and places the element (vert, edge, face) at your cursor. select two verts and press [F] to fill the edge. to fill a face, you only need to select 2 edges and press [F] you can also press [alt RMB] to select the edge loop that goes around the holes for the taillights (using circle instead of cylinder): change snapping to face, and set to project individual elements. then in the viewport, g, limit to y-axis, and ctrl to snap. for the windows: select the windows, the one with the solidify modifier last, and [ctrl L] to bring up the link menu.

@AnatoliiDemianenko 4 ай бұрын

Nice! Thanks for this tutorial, it's very helpful.

@Airtight215 3 жыл бұрын

The new shortcut to merge 2 verts is “M”. Thanks for the longer, more in-depth content. I literally just requested it like 3 days ago. You may have picked up a new Patron.

@Airtight215 3 жыл бұрын

@Rogue Nero That's because you're using an old version of Blender. I'm referring to the newest version. Not sure what you mean by, "what you've tested". A shortcut is a shortcut, no need for testing.

@jonathanthorne8673 3 жыл бұрын

That was amazing. Well done!

@macropsialberto 3 жыл бұрын

spectacular! awesome how you explain the tuto, thank you! greetings from Bogotá, Colombia!

@Josabooba 3 жыл бұрын

(Blueprint Tip) I'm really new to this modelling - but with the few symmetrical blueprints I have used - I first bring it in to something like MS Paint and find the dead centre (by pixel coordinates) and draw a (1px) vertical line down the centre of the blueprint (and a small horizontal 1px line to make a cross-hair) - I find this makes lining it all (front / back etc) up very easy in blender (zoomed waaaay in to line up perfectly).

@haterdesaint 2 жыл бұрын

This is a great tip!

@craigberry5713 3 жыл бұрын

Awesome! Thank you for making these! Would be very interested in the whole character entering/exiting car process if you decide to stream / make a tutorial of that part. Thanks again!

@joe_fabricator 6 ай бұрын

Great tutorial, thank you. Quite enjoyed it.

@nove1398 3 жыл бұрын

I cannot do much in blender but your videos really inspire me, this was great work for low poly. Keep it up

@Imphenzia 3 жыл бұрын

Happy to hear that :)

@mohammadsabri5611 3 жыл бұрын

i liked it so much. few tips: 1- don't select edges one by one, select 1st then ctrl the last edge 2-you can use (local view) for small objects in scene for easier navigation

@RossTownsend 3 жыл бұрын

Low Poly to stylized tips/methods would be good to watch. I have only just discovered you and your tree (island and rock) look great!

@hamidreza6392 3 жыл бұрын

THANKS Man, really great tutorial. I created a BMW M3 E30 and it looks amazing

@alastoirdefaruh6094 3 жыл бұрын

Thank you, Imphenzia!

@ChrisAllenMusic 3 жыл бұрын

Great content, as usual. Thanks!

@trturki252 3 жыл бұрын

MODEL YOURSELF IN LOW POLY

@thelastenvoy8690 3 жыл бұрын

good idea for a 10 Minute challenge :)

@joshuanebeker4511 3 жыл бұрын

Just Yes

@MighyMi124 3 жыл бұрын

Nice and helpfull tuts! more please!!! :) Thanks for uploading those!

@MartianGopnik 3 жыл бұрын

Overlaying blueprints, ingenious! I feel like a bit of an idiot for working off of reference images alone, until now... Lol. I think I might just scrap my model and redo it this way. Thanks for the helpful tutorial!

@jessepitman2994 Жыл бұрын

Best low poly car tut so far. Even if it wasn't, this video is worth it just for the snipping tool lol life changed

@Nitinkb 3 жыл бұрын

did you read peoples mind you always drop right tutorial at right time

@3DPDK 3 жыл бұрын

I used to do this for Flight Simulator aircraft, except that I didn't use Blender and the models were definitely not low poly by the time FS9 came out. I couldn't possibly give you any useful tips on Blender techniques, but I can tell you that being able to tell what 3D shape is represented in the "3 view" image is an insight that takes time to master. It's not that the line drawings aren't accurate (well ... that depends on where you got the drawing), it's that line drawings don't always indicate compound curves too well. Having a few photos of the subject (as you did with the spoiler) can sometimes help ... sometimes! This was entertaining, as usual, but in this case I'll stick with my tried-n-true methods I've been using for 15 years and then import the model to Blender as an OBJ. P.S. The way you built the brake light is how I build entire aircraft, one section at a time.

@kgfkdjgfodkjopkfg Жыл бұрын

Thanks for the tutorial.

@premyadav-pu3cb 9 ай бұрын

thanks for this car toturial 😀

@longpinkytoes 3 жыл бұрын

add -> image -> reference, instead of as background, then drag to middle of mesh front-to-back and it auto-hides the verts you would select -> h for clarity

@pv8685 2 жыл бұрын

if you want to keep your quad topology and also want to create a triangluar shape, try pulling one vert onto an edge. this way you get an triangular shaped quad.

@nmz61 3 жыл бұрын

Thank you very much man, this was amazing 👍

@cristianangelo9240 3 жыл бұрын

Una vez más extraordinario 😉

@zacsamuel7295 3 жыл бұрын

Thank you, great tutorial!

@discreet_boson 3 жыл бұрын

Wow, what a great tut

@h0x91B 3 жыл бұрын

40:17 when you saving you can press on "plus" button near "save" it will increase the number automatically... All you need that save the file in the form "something_00" then "plus" will work.

@adrivd_ 3 жыл бұрын

Wow im early! Nice job imphenzia ;)

@MrTakeshi763 2 жыл бұрын

Great video for teaching beginners to model. Liked and subscribed 👍

@fumieshi3071 3 жыл бұрын

Thanks for uploading this!

@Imphenzia 3 жыл бұрын

You're welcome =)

@martingomola7900 3 жыл бұрын

10:24 To make edge between vertices select vertices and press F like at making faces by selecting edges.

@Lee_Hall 3 жыл бұрын

Another great tutorial. Nice to have another one at a slower pace as much as I do like seeing your 10 minute challenges. Couple Q's:- You mention about making things into quads, however in computer graphics things are rendered in triangles so would it not be better to model in tri's rather than quads or does Blender handle this under the covers? When you did the tail lights you modeled them as separate objects rather than adding extra geometry to the main car body. Is there any advantages to doing this as surely at the end of the day you still have a similar amount of verts to render. Love to see more of these longer slower paced tutorials. Are you planning on modeling some other cars? Keep up the great work!

@Satabol 3 жыл бұрын

It is finished. Thank you.

@lil-jeppy-_-4123 3 жыл бұрын

Tjena Stefan!!!!!

@mkgames7608 3 жыл бұрын

Thank you !

@fearcry 3 жыл бұрын

Learn a lot, thank you for the tutorial :)

@Imphenzia 3 жыл бұрын

My pleasure!

@manjunathsutar6483 3 жыл бұрын

Thanks Man, really appreciated

@Slacker333666 3 жыл бұрын

Love your videos and would really love a video of your background and how you gotten into blender and unity and how long it took you to really understand the basics of them and maybe like things you practiced to get better

@SuperIceteapeach 3 жыл бұрын

Pro-Tip: listen to Lo-Fi music while watching this, than this video only feels like 15 mins! :D Awesome Video my man, learned sooo much and took so much with me!

@ai_and_chill 3 жыл бұрын

awesome tutorial thanks!

@jehangunatilake7315 3 жыл бұрын

Well this is nice good job mate

@romakii7601 3 жыл бұрын

Speechless..

@kailed 3 жыл бұрын

well done that was a nice tutorial !

@Imphenzia 3 жыл бұрын

Glad you liked it!

@julies5094 3 жыл бұрын

New blender badge in the thumbnail PogChamp

@wernergraaff785 3 жыл бұрын

For your merch, I think the lava monster you made would look great!

@ahmadresham3786 3 жыл бұрын

Awesome thanks

@BeRaikwal 3 жыл бұрын

MANNNNNNNNNNNNNNNN! !!!! SICKO MODE ON!!! NISSAN GTR MY FAVORITE!!!! I SUBSCRIBED!!!

@Imphenzia 3 жыл бұрын

Glad you like it, thanks for the sub :)

@RJLpt 3 жыл бұрын

16:27 Here's the Auto-mirror part, I was looking particulary for this after watching the whole video. If you can't find the Auto-mirror panel, go back to Preferences - Add-ons - search "mirror" and check "Mesh: Auto Mirror".

@MHKaruno 3 жыл бұрын

A little tip: for the tail lights i loop selected the outer edges and searched for "circle". That way you automatically align the vertices into a circle. EDIT: I should watch videos until the end before commenting. You used circle for the steering wheel ;)

@BF3_Gamer 3 жыл бұрын

Nice!

@joeleldo5064 3 жыл бұрын

You can use ctrl + alt + Q to get that quad view........ atleast in 2.79 good workflow by the way 👍

@SalvatoreAntoine Жыл бұрын

amazing

@nox3051 3 жыл бұрын

Thank you

@areebiqbal4831 3 жыл бұрын

Thanks!

@fifthepisode7986 2 жыл бұрын

learnt a lot from you

@jonatascostameira9241 3 жыл бұрын

very nice

@handlehaggler 5 ай бұрын

bro casually knocked this out in the time it took me to make a coffee

@martinhoneves 3 жыл бұрын

I learn so much techniques here, I am still a newbie, but this is perfect and those 10 minutes always remind me of MATRIX - I know Kung Fu - No you don't!!! - No I don't! Thank you for your time and patience!

@YungAsger 3 жыл бұрын

Good work :D

@shawngrignon4020 3 жыл бұрын

Thanks a lot for making these videos! Full of helpful tips for any project. Where do you sell your games? Do you have any on Steam?

@retikle5651 3 жыл бұрын

good content

@ArtofWEZ 3 жыл бұрын

Thank you very much!

@lautarolavecchia5995 3 жыл бұрын

great video

@Imphenzia 3 жыл бұрын

Thanks!

@CobnutVTS 3 жыл бұрын

im gonna give this a watch!

@Imphenzia 3 жыл бұрын

You'll probably find loads of things I could improve on, tips are welcome :)

@CobnutVTS 3 жыл бұрын

@@Imphenzia we will see xD

@thebarnowls7805 Жыл бұрын

Fantastic guide. Me and a friend of mine are working on a low-poly racing game, and this really assisted us. Thank you!

@user-ow8uu1st6g Жыл бұрын

So am I,Just like you

@user-ow8uu1st6g Жыл бұрын

but I don't have friend

@juicycubetv9339 3 жыл бұрын

this blows my mind. and still a LOW POLY

@artandelectronics9905 3 жыл бұрын

Bravo 👏👏👏👏

@Ferenc-Racz Жыл бұрын

Most interesting parts for me. :) 00:00:43 : Placing the reference image. 00:05:45 : How to add a single vertext (if you are not able) 00:31:39 : Car painting from color palette. 00:52:05 : Dethatching parts. 01:05:55 : Openeable door.

@whynotanyting 3 жыл бұрын

10:20 You want to use f as in "fill" to connect those two vertices. j joins them, but I think that only works if there's connected faces.

@IngSpendlik 3 жыл бұрын

Thank you!!!!

@iangraham6730 3 жыл бұрын

I used to transport brand new GTR's, still in their wrappers, from Newcastle to Belfast in my last job . . Still regretting never pushing launch control into the back of the truck 😄😭

@ImComiz 3 жыл бұрын

You need to try Lightshot! It is a snipping tool that you will love! Thanks for the video :)

@Imphenzia 3 жыл бұрын

I'll check it out!

@YourMentalHealthGuy 3 жыл бұрын

wow thank you for this sifu

@Imphenzia 3 жыл бұрын

My pleasure

@camdengonzales4352 3 жыл бұрын

Great tutorial! Was haflway through and Blender decided to crash lol.

@muhammadzulhusni2895 3 жыл бұрын

The car was cute 😊😍

@vladimiradushkevich4178 3 жыл бұрын

How make the reference box is transparency? Your videos are amazing! Keep up the good work!

@oozly9291 3 жыл бұрын

Amazing but will you ever continue your game tutorial?

@sepehr-9210 3 жыл бұрын

You know that extruding and filling it is very hard choice, If you watched cg geek vids ,he making it with a cube and adding loop cuts

@ICEMANZIDANE 3 жыл бұрын

i ALWAYS have the same issue and its making me crazy ! The sideview of the blueprints not only have the sideview, they also have quite a bit of depth so you can almost see to the "center line" of the car. And when you have a blueprint (a car) with many sidelines, its almost impossible to see the sideview only.

@Injabsful 2 жыл бұрын

Nice video man , iw been learning a lot from your videos . i get confused sometimes ,what is considered a low poly mode l? some forums i read its up ti 15k verts at some it says under 100k :D

@falconeer4382 3 жыл бұрын

Hey! just wanted to tell you if you didn't know you don't have to press Ctrl+E, then click, then Ctrl+S, you can just Ctrl+E and then directly press Ctrl+S and it will have the same function.