Modern-Day, Butyl Sound Dampening 101- An Overview of the First Stage of Sound Deadening

Рет қаралды 49,532

3 жыл бұрын

Car Builders runs you through what stage 1 sound deadening is, how it works, how it is applied and what tools you'll need.
Remember, stage 1 is used to dampening sound generated from panel vibration. For external noise, you will need to look at the stage 2 products, which replaces the factory cotton jute or shoddy.
Materials used in this video:
Stage 1 Sound Deadener
www.carbuilders.com.au/soundd...
Install Kit
www.carbuilders.com.au/sound-...
Feel free to contact us at sales@carbuilders.com.au to answer any of your questions.

Пікірлер: 18

@ivareskesner2019 2 жыл бұрын

Can you help us out with an answer, mate? Would these butyl sheets be any good for sound proofing a grow tent or is the idea that they're in contact with metal and absorb the metal vibrations?

@T8ersalad Жыл бұрын

I cant disagree with "make sure not to touch the sticky butyl layer." Although butyl is self adhesive and self healing and absolutely is not at risk of a little hand oil keeping it from making bond. So I agree and disagree at once. 😂

@harrisons62 3 жыл бұрын

Bought a pack put as much as I could into the doors makes a load of difference, had to use my mum’s face roller lol because I forgot to buy the roller.

@carbuilders1 3 жыл бұрын

😆 👍

@0qatarqatar 3 жыл бұрын

Keep them up buddy, awesome

@carbuilders1 3 жыл бұрын

Thanks for the support 👍

@jeffreyeiford2750 3 жыл бұрын

Hello , I have a 92 Dakota . I was going to put -POR 15 45404 rust prevention coating on the metal first . My question is will your sound deader stick to this ? Thx Mouse

@carbuilders1 3 жыл бұрын

Hi Mouse. Yes, it will. The best way to test if anything will stick is to test it with sticky tape. If the tape sticks down firmly so will the sound deadener 👍

@jeffreyeiford2750 3 жыл бұрын

Thank you

@adrianp2007 Жыл бұрын

G'day, I'm about to lay some deadener in my 1997 Holden VS Commodore. Should I remove the original bitumen deadener first? Why? What if I don't? What's the difference? Cheers mate!

@luqmanhakim6432 3 жыл бұрын

Hi, just a quick question. Does your products certified safe i.e. have ROHS, ISO?

@carbuilders1 3 жыл бұрын

Hi Luqman. Which country are you from? These meet all Australian safety/health requirements 👍

@luqmanhakim6432 3 жыл бұрын

@@carbuilders1 Thanks. Glad to know that. I'm from Malaysia. You got dealer here or ship directly from Australia?

@nt4409 3 жыл бұрын

u should do the before and after thing. Starts the engine, turn a decibel meter on before deadening and after.

@carbuilders1 3 жыл бұрын

Ni Nate. We did this in another video kzfaq.info/get/bejne/ert9nZynlc_Zen0.html check it out at about the 20:30 minute mark of the video 👍

@brettbarker8444 9 ай бұрын

@1:10 “That’s not a knoife.” 😂😂 Sorry.

@RYAN-ms1mr 3 жыл бұрын

are air bubbles an issue with these pads? how do you avoid air bubbles

@carbuilders1 3 жыл бұрын

Hi Ryan, when using a roller its quite easy to roll out any bubbles. If you get a stubborn one, just a small slit with a knife, roll over it and you are sorted.