See this stuff is outstanding. I could never modify anything. But by watching you , just maybe I’d have confidence to try . Good video
@NilsKall3 жыл бұрын
Thank you! Its really fun to modify and invent new ways of using stuff. I highly recommend trying! Thanks for your kind words, really appreciate it!
@ArcticExploring3 жыл бұрын
I see you have the same Biltema plow as me, but you had really much work by modifying it. Atleast you have the tools and skill for doing it 😀 Subscribed to you, and will watch all your videos.
@NilsKall3 жыл бұрын
Yes its the same type but from another company, but I think mine is more narrow, 120cm. It was way too much work to modify it, I should have just made a different mid mount but OK, you learn all the time! Thanks for subscribing, hope you like the content. I subscribed to you as well. Have a great day!
@ArcticExploring3 жыл бұрын
@@NilsKall Yes it looks just the same as mine, identical that I could see. When we mounted mine, we had to scratch our head for a long time before we found a solution. But atleast we save a little money by buying cheaper, but a little more hazzle.
@NilsKall3 жыл бұрын
@@ArcticExploring yes that is true, I actually got mine with another ATV. BUT I think this is exactly the same as Warn Value Line that cos 2x more.
@ArcticExploring3 жыл бұрын
@@NilsKall Ah okay, I never heard about that brand before.
@NilsKall3 жыл бұрын
@@ArcticExploring Warn is a big manufacturer of winches and Off-road equipment.
@charliebeck14482 жыл бұрын
You should maybe use 2 springs or maybe 1 spring and along one hooked together that’s a lot of tension on your blade and a long way for your spring to stretch
@NilsKall2 жыл бұрын
I change springs in the end of the video to the ones that are supposed to be on this blade. It worked great since then.
@pricetag30 Жыл бұрын
a lot of work when the correct mount would be a lot better!
@NilsKall Жыл бұрын
There are no front mounts available for this ATV. It is too old. I have used this a lot for the snow plow, a front rake and a front trailer ball so it was definitely worth the effort. Thanks for watching!
@mikesworld603 жыл бұрын
Did the spring kit you put on at the end help with the premature trip the plow had. Would it help if the plow had the shoes on it to keep it from going to deep so you could just set it down all the way and it would stay off the ground a little bit.
@NilsKall3 жыл бұрын
Hi! The springs sure did help, it is working the way it should now. Perhaps the shoes would help but it wasn’t an issue once I got the correct springs there.
@tadaskabliukas27976 ай бұрын
does the Honda hold up well? Did you need to repair the motorcycle?
@NilsKall6 ай бұрын
Motorcycle? Do you mean the ATV? The Honda still works great! I need some new gaskets for the carburetor as it is dripping a little bit of gasoline but it is 24 years old so I guess it’s OK. Parts are still easy to find.
@danewert23062 жыл бұрын
You need stronger springs. go to Koplin web site under plow parts. just ordered some from there. good luck.
@NilsKall2 жыл бұрын
Thanks! In the end of the video I install springs that is meant for this snow plow and it works much better.
@soulis10003 жыл бұрын
En billigare mig med flusstråd kanske vore nåt :) Vet inte riktigt hur bra de funkar, men det borde vara lättare att iaf fästa ihop grejorna med.
@NilsKall3 жыл бұрын
Hej, Har redan en mig/mag svets med gas och en utan men föredrar pinne. Blir mer fart o fräs. MIG/MAG är så klent på en fas. Sen så var de här pinnarna lite gamla men jag är för snål för att slänga så det får bli lite svårsvetsat 😁. Flusstråd funkar Ok men en del av de här plåtarna/rören var över 5 mm så då behövs kraftig/bra svets alt pinnsvets. Min trälada är inte heller optimal att svetsa inne i så vill gärna stå ute o då går MIG/MAG med gas bort. Tack för rekommendationen, kanhända ett bra tips för nån annan. Mvh Nils
@soulis10003 жыл бұрын
@@NilsKall Aha då förstår jag. Hjälper det att köra pinnarna i ugnen tror du (de suger väl åt sig fukt va?) eller passerar de sitt bäst före datum ändå?
@NilsKall3 жыл бұрын
@@soulis1000 ja det finns metoder för att torka men jag kör bara och byter när det djävlas för mycket. Kommer köra med 3.2 mm nästa gång, de här var lite klena. Har svetsat ett winchfäste på den där frontplåten/plogfästet men det kommer i nästa video.
@Koivumaa943 жыл бұрын
Du behöver ju knappt ploga eller skotta. Brukar ni inte ha mer snö än så?
@NilsKall3 жыл бұрын
Jodå har varit mer snö sen dess. Kommer fler plogvideos, det här var bara ett första test.
@NilsKall3 жыл бұрын
Jodå har varit mer snö sen dess. Kommer fler plogvideos, det här var bara ett första test.
@Koivumaa943 жыл бұрын
@@NilsKall okej. Vi fick ca 15cm inatt/idag och det ska snöa imorgon också. Jag använder både fyrhjuling med plog och slunga.
@NilsKall3 жыл бұрын
@@Koivumaa94 det är för att du bor i en vettig del av Sverige! Kan du inte filma lite när du plogar?
@NilsKall3 жыл бұрын
@@Koivumaa94 antar att du plogar med Suzukin?
@StephenMortimer3 жыл бұрын
Try SCRATCHING for an arc
@NilsKall3 жыл бұрын
I am. The rods are a bit old, some work great, some not as great.