Рет қаралды 36,333
The PZEM004T module is a mains powered module that measures voltage, current, power factor, apparent power and frequency. It has no display but provides these values over a serial interface. In this video, I am going to modify it to measure from 0 volts AC onwards and in a second step to take its operating power from the serial port. This makes using the module much simpler.
There will be a follow-on video, about accuracy and using the software I wrote to use the module.
Note: R18 in the schematic should be 0.5 Ohm not 0.05 Ohm
00:00 the PZEM-004T
01:38 specs
02:52 serial protocol
03:52 wiring diagram
04:49 current transformer
05:16 interface cable
06:23 the PCB
07:49 V9881D chip
09:13 schematic & function
13:45 modification options
14:59 measure from 0V
19:36 ..and power from serial
25:07 modified PCB complete
The x1 / x10 feature is explained here: • Improving the sensitiv...
The schematics and software is here: github.com/TheHWcave/Peacefai...
You can support the channel by becoming a patron. www.patreon.com/user?u=45604138
As a patron you get early access to all my videos as well as exclusive content.