That’s cool, but can you show how you connect all those together. That would be really help
@AguilarAmplificationАй бұрын
Certainly. Aguilar amplifiers can be connected either series or parallel to your cabinets. You can connect your cabinets either way and the amplifier will distribute the output evenly. How you connect depends on if the Aguilar amplifier you have has one or two speaker outputs. When attaching three cabinets we recommend connecting in series: amp -> cabinet 1 -> cabinet 2 -> cabinet 3.
@shigetsanАй бұрын
@@AguilarAmplification thank you
@bflathead Жыл бұрын
I’m running TH700 with 2 SL115 cabs… just awesome. No horns or tweeters to deal with. 😊
@TeepleBass2 жыл бұрын
I currently run two SL112 and one SL115 with my AG700.
@TeepleBass9 ай бұрын
@@godzoo18Fantastic!
@TheGilounet2 жыл бұрын
Love the Poseidon Green series
@billytrance6893 Жыл бұрын
I went into my local guitar shop recently and played the AG 700 through Aguilar cabs (light cabs), it is a BEAUTIFUL sounding amp, much better in my opinion than the Tone Hammer and THE best sounding bass amp I ever heard. However, I was using a Fender Jazz bass (4-string, passive) with no pedals plugged into the AG 700 and I noticed it cut-out frequently. All the videos I had seen on KZfaq didn’t seem to do that. Any idea why it was cutting out when the gain knob was at 11:00 and every demonstration video I have watched on it is at or higher than 11 but I didn’t notice it cutting out. This is the only thing keeping me from purchasing it. If you know why and how it can be prevented let me know. The only thing I wasn’t aware of was whether I had the active or passive switch on, but I was playing through a passive bass. Thanks!
@AguilarAmplification Жыл бұрын
Hello Billy. We're glad you enjoyed the AG 700 and yes, your instinct is right, the amp should not be cutting in and out. When you have a moment could you please email our customer service, support@korgusa.com, to let them know where you demo'd the amplifier so it can be reviewed by a technician. Thanks!
@obidibidou69332 жыл бұрын
Wouldn't it have been a good idea to have sound from all the variations ??? And how do you connect 3 cabs when there's only 2 slots on the Amp .
@PaDamTuts Жыл бұрын
chain connection with TS, I assume
@nicolasbidau83102 ай бұрын
I just bought the AG 700 (old version). I'm thinking about a flexible cabinet combination. If i connect a SL112 (8ohm) + SL212 (4ohm), does it mean that 1/3 of the power goes to the SL112 and 2/3 of the power goes to the SL212? (This way each 12' woofer get exactly the same power... Appeox. 233 watt?). What about connecting a single SL112 (250watt max)... Is there any risk to damage the amp or cab?
@user-mv3mn2xi5w4 ай бұрын
Realign the foot pegs on the 12's so they'll stack on the 10's and 15 better, please? And thank you!
@barisbungybass3577 Жыл бұрын
How are we gonna connect 4 and 8 Ohm cabinets together? Like a chain. or with seperate inputs? Thank you in advance.
@AguilarAmplification Жыл бұрын
Hey Baris! Both are fine options and distribute the output the same with no damage to your gear.
@barisbungybass3577 Жыл бұрын
@@AguilarAmplification THANK YOU VERY MUCH. You saved my life. ❤🙏🙏
@MajorRagerRay Жыл бұрын
What cab pairing would be better for the tone hammer 700 in regard to ohms? SL212 4 ohm with SL115 4ohm Or SL212 4ohm with SL115 8ohm
@AguilarAmplification Жыл бұрын
Hi Raymond. The TH 700 cannot go down to 2 ohms, so one 4 ohm cabinet and one 8 ohm cabinet is the way to go.
@MajorRagerRay Жыл бұрын
@AguilarAmplification awesome thanks! Do you know if there would be any phasing issues if i paired my 212 with a 115? Or would 2 212s be a better pairing?
@travismorton65042 жыл бұрын
Can you mix different ohm cabinets with the tone hammer 500? Like say a 2212 4ohm with a 210 8 ohm?
@TeepleBass2 жыл бұрын
No. One 4 ohm cab or two 8 ohm only.
@daveq2620 Жыл бұрын
can you do the same with th TH500? or should I go for the TH700 to have this feature?
@AguilarAmplification Жыл бұрын
Only our 700 amplifiers have a power handling of 2.67 ohms.
@juunior10 ай бұрын
I believe your DB751 can handle 2.67 ohm as well since its power stage is mosfet. Is that correct?
@AguilarAmplification10 ай бұрын
The DB 751 can handle 2 ohms!
@hamishmccay60084 ай бұрын
@@AguilarAmplification Any chance of a Tone Hammer amp coming out with a 2ohm option?