Molex - Glow Wire Connector Testing

No video

Molex - Glow Wire Connector Testing

Рет қаралды 17,587

Күн бұрын

Molex glow wire connectors address a series of design challenges that many manufacturing companies often run into. Molex Glow Wire connectors are manufactured to meet the needs of global manufacturing electrical standards such as GWEPT IEC 60695-2-11 and GWEPT IEC 60335-1
Learn More: www.molex.com/GlowWire

Пікірлер: 4

@prodtpe9695 2 жыл бұрын

What the best material of plastic can be a good test for glow wire ?

@danpascoli1358 3 жыл бұрын

Do cable side housings need to have their crimp contacts populated for 60695-2-11 testing, or is it optional? Thanks for posting.

@mcvangils 2 жыл бұрын

I don't think it matters. It's about flammability of the resin. The crimp contacts are metal and won't catch fire...

@BlackCrusader 2 жыл бұрын

@@mcvangils This falls under GWEPT. Since you also would need to test if there are any effects on heat transfer throughout the connector due to the crimps in place. It is also possible (Not in this case) that the crimping or installation of the part in end product modifies the part itself (For example, a LAN connector has a part that gets bent as a form of standard installation/mounting). You are never 100% sure how the part will behave after installation/modification untill you test.