Monitoring Multiple Bands with SDRuno (AN007)

Рет қаралды 34,098

SDRplay Software Defined Radio Receiver

Күн бұрын

SDRuno comes with easy to use "band buttons" enabling quick and easy access to amateur and broadcast bands. However when you want to monitor more than one band at a time, this video by Steve Brightman shows you how. See the catalog link below for an accompanying application note.
SDRuno is a Windows application but this demo was made using Parallels running on a 2011 Mac Mini.
This is one of many video guides from SDRplay - makers of the RSP family of SDR radios. See the full list of SDRplay videos and applications documents on: www.sdrplay.co...
The RSP family of SDRs from SDRplay cover 1kHz to 2 GHz with no gaps and give up to 10MHz spectrum visibility.
SDRplay is a UK company. The RSP SDR receivers are made in the UK and can be purchased for worldwide delivery directly from www.sdrplay.com/ (click on purchase and select your country to view shipping costs) or you can buy from any of our worldwide resellers listed here: www.sdrplay.com... Many of the resellers offer local free shipping and/or local language technical support.
The SDRplay KZfaq Channel is: / sdrplayrsp

Пікірлер: 31

@kxkayser 6 жыл бұрын

I just wanted to say how great the support from SDRPlay in general, and Steve in particular has been since I purchased my first SDRPlay device. It will certainly lead me to purchase more from this company in the future.

@Caprica-Approaches Жыл бұрын

Extremely helpful in many ways for understanding, and using the system - thank you (belatedly)!

@derekthwaytes4689 4 жыл бұрын

very useful on the SDR uno, thank you for taking the time to explain some functions, I found it very helpful.

@geralddoherty1640 6 жыл бұрын

Keep up the good work my friend I find it very rewarding thank you for what you do in the work you put into it can’t be easy until next time

@krb35krb Жыл бұрын

Very well explained, nice and clear speech, thank you.

@K1QS_Radio 6 жыл бұрын

Thank you, The videos are very helpful. Good support tool.

@ManuelPinner 2 жыл бұрын

Thank You for Showing Me How to It use this Method to Listen to Two Ham Repeaters,

@subzerolives 5 жыл бұрын

One important thing here is you need a decent pc for actions like this, the pc in this video is running at it's limit.

@stevebrightman2309 6 жыл бұрын

I didn't specifically mention it in the video but if you want to use one VRX for the panadapter and another VRX for independent monitoring it will only work if you have a broad range RF input to the RSP. So if you have an IF out panadapter setup it will not work.

@kxkayser 6 жыл бұрын

Hey Steve. Great video explaining all that you taught me last week or so. Eagerly awaiting the new release so I can save the settings. I notice that there is some instability in the setup. Sometimes, the SPX 2 loses sync with VRX 2 and I have to restart the App. Don't know if you've sen that. Anyway, I'm sure going to bookmark this video. 73's.

@stevebrightman2309 6 жыл бұрын

Ken, can't say I've seen that in my testing, unless you mean that sometimes you set a freq in the VRX and it doesn't "take" in the SP1 window? That happens if you try and input a frequency outside the range defined by your LO and Sample rate. The fix is to turn off LO lock! However, if you did the sums right you shouldn't have to do this.

@kxkayser 6 жыл бұрын

Hi Steve. That may be what I did. I also note that if you manually input a frequency in the VRX window, if removes the LO lock just as if you use the Band buttons. Thanks.

@stevebrightman2309 6 жыл бұрын

Yes, that's why I specifically said click! You can still use the mouse wheel in the SP1 window for tuning at the step size, or hovering over the frequency digits.

@26TM034 Жыл бұрын

any to monitor 2,3,4 frequency s in the same band digi, voice, etc etc.. is there a walkthru for that

@SDRplayRSP Жыл бұрын

take a look at kzfaq.info/get/bejne/pMqFg9Bns8nHkmw.html

@anonymous_friend 7 ай бұрын

Can you listen to 2m repeaters with sdr uno that require a tone?

@SDRplayRSP 7 ай бұрын

SDRuno plus an SDRplay RSP are purely receivers. Transmit tones are needed to activate certain repeaters. With SDRuno you can receive any transmissions from a particular 2m repeater that is in range.

@glenngoodale1709 6 жыл бұрын

have you made a book or worksheet for beginners like me ??

@haskellnj 2 жыл бұрын

U never say what a VRX is?

@SDRplayRSP 2 жыл бұрын

Apologies. It's a Virtual RX or Virtual Receiver. (RX is an abreviation for receiver). There's a description on page 53 of the current version of the manual: www.sdrplay.com/docs/SDRplay_SDRuno_User_Manual.pdf

@BenBeath 5 жыл бұрын

Ohh, @ 1m42, what was the rising frequency transmission?

@SDRplayRSP 5 жыл бұрын

Probably an Ionosonde: en.wikipedia.org/wiki/Ionosonde

@Fat-lads-Reviews 5 жыл бұрын

Hi Steve great video. im trying to monitor two frequencies and my second sp although is showing, there is nothing in the waterfall unless I click the RSYN1 on the second VRX. your video is showing signals on both at the same time. am I missing something? if I switch between the two I have signals on both bands.

@SDRplayRSP 5 жыл бұрын

RSYN1 is only used to allow sync with your rig via OmniRig. You should be seeing signals on both bands at the same time, assuming both are set to frequencies within the range of your SR/DEC values. If you continue to have problems please go to sdrplay.com and open a support ticket.

@RuVi78 5 жыл бұрын

Multi Band with RSP1A or only Duo ?

@SDRplayRSP 5 жыл бұрын

Rui Vieira Any RSP can show multiple bands provided they are without n the maximum 10MHz sampling window. The RSPduo allows two bands more than 10MHz apart.

@antalperge1007 Жыл бұрын

@@SDRplayRSP Thank you for your answer, love the RSP1A, the BEST SDR FOR A STARTER ! 💖

@fundacionmaximorendimiento5477 5 жыл бұрын

Hi Steve, base on 10 MHZ BW limitation , the example in the video 40-20m, as 30m is inside,no problem to display three band at same time. For the case if I want to sample 40m-80m and also 10m band , which is your suggestion if I want to monitor activity in all three band , as 10m falls outside . Is there a way to show ? SDR RSP1A Thanks in advance, Fernando

@SDRplayRSP 5 жыл бұрын

If the bands you want to monitor fall outside the 10 MHz window then you have to switch back and forth to look at each band. You can still use multiple VRX and use the Band select buttons to frame the band of interest - but you won't be able to monitor simultaneously. However, if you have an RSPduo you can monitor 2 widely spaced bands simultaneously, it offers two independently programmable 2MHz windows in 2 tuner mode.

@glenngoodale1709 6 жыл бұрын

Nice job 😂😂