Monport GI60 JPT MOPA Fiber Laser - FULL SETUP, TESTING & HONEST REVIEW

No video

Monport GI60 JPT MOPA Fiber Laser - FULL SETUP, TESTING & HONEST REVIEW

Рет қаралды 7,075

Күн бұрын

In this video I'll be unboxing, setting up and testing the Monport GI60 Fiber Laser. This is a 60 watt JPT MOPA Laser which puts out a powerful 1064nm wavelength laser beam. It features an F-Theta 200mm lens, Electric Z-lifter, super fast speeds, and much more. This fiber laser can easily engrave, mark and cut metal along with the capability of deep engraving. After testing this machine on various metals I can honestly say that it is by far the best laser I have used for metal and extremely easy to use. It comes with EZCad2 but if you prefer to use Lightburn it is compatible with that as well. Stay tuned for upcoming videos which will show exactly the settings I used for deep engraving along with engraving perfect photos. If you like this video, please give it a thumbs up and hit that Subscribe button for more.
Make sure to ring the bell to get notified of all my newest videos as they come out so stay tuned.
Thanks For Watching!
#Monport #GI60 #FiberLaser
*********Where To Order**********
Monport GI60 Fiber Laser
bit.ly/3MYMgUB
USE CODE "ADROCK10" to save 10 % Off your entire order!
-No Minimum Purchase Required
-Valid For All Store Products
******Graphite Molds********
To purchase the graphite molds as seen in my videos, visit my website at www.ArtByAdrock.com
******MERCHANDISE********
Merch is available in my TeeSpring store as well. Help support my channel by picking a T-shirt and more!
teespring.com/...
***DISCLAIMER****
This video is for entertainment and educational purposes only. Do not try and replicate this at home unless you know what you are doing. Molten metal and Lasers are extremely hot and dangerous so always use precaution and wear protective gear.
****SOME OF MY OTHER VIDEOS****
Casting A Solid BRONZE Katana & Ingot From Scrap Copper And Tin - Monster Bronze Melt - • Casting A Solid BRONZE...
Melting Aluminum Cans At Home - Easy DIY Recycling Process - • Melting Aluminum Cans ...
Casting A Solid BRONZE Dagger - Athena's GOLDEN Dagger - Full Metal Casting Process - • Casting A Solid BRONZE...
Melting Copper Pipes Into A BRONZE Black Prince Dagger - • Melting Copper Pipes I...
Aluminum Casting Khal Drogo's ARAKH weapon - Game Of Thrones - • Aluminum Casting Khal ...
Bullets To Blades - Casting Double Mini Blades Of Chaos (God Of War) - • Bullets To Blades - Ca...
Aluminum Casting Aquaman's TRIDENT - • Aluminum Casting Aquam...
****SOCIAL MEDIA LINKS****
Instagram: / adrock_702
Twitter: / iamadrock
Website: www.artbyadroc...

Пікірлер: 42

@ArtByAdrock 9 ай бұрын

Hey everyone, this GI60 Fiber laser by Monport is absolutely awesome! After further testing this machine, it creates some amazing deep engravings which I’ll be showing in an upcoming video. I’ll also go into all of the settings I use for photo engraving too since there’s just too much to cover in 1 video. If you have any questions, feel free to leave a comment and I’ll try and help out as much as possible. Have a great rest of the week and I’ll see you all in the next one. 👍🏻

@MasterTheNEC 8 ай бұрын

I will take any TIPS..Just ordered this laser.

@galtsgarage5775 6 ай бұрын

I bought this machine last September, haven't put together a review video yet but on the whole I've been really impressed with it. Don't care for the up/down or power buttons because they're too small and it shipped with a bad button but other than that relatively minor complaint this machine has been great. The price has also come down $500 since I bought it, but even at the higher price it's a great value. Their customer service has been great too. A quick word of caution, if you're going to buy a different lens than the 200x200 it came with be aware the thread pitch on this machine is 68x1 not the normal 85x1. I bought a 70x70 for it and emailed them asking what thread pitch it uses and they actually sent me an adapter for the thread pitch I bought without me even asking for it. Anyhow, good video and I hope the machine is as good for you as it has been for me!

@stickerchicago 8 ай бұрын

WOW! That was a very cool unboxing and I can’t wait to see what else you make with it. Also. The coin….. SEND IT TO ME!!! 😁👏

@ChatterontheWire 9 ай бұрын

fiber laser is on my future buy list, thanks for the review and vid on it!

@JustinCiriello 5 ай бұрын

I bought this exact laser from Monport because of your review. My experience has been subpar. They sent me a "new" machine with a bent screw rod. I contacted them about it weeks ago. They claim they've issued me a new rod but I have no tracking number or a new rod. Their customer service is absolutely horrible. Not to mention, they did not offer me instructions on how to make this repair either. Also, will they be compensating me for my time lost? No, of course not. Horrible company. Frankly, for the amount of money I spent, I'm disgusted by this company and will never support them again. Run from Monport. Run fast.

@MasterTheNEC 8 ай бұрын

Thanks!

@rssacnavy 4 ай бұрын

So, I have the same machine. but one thing I had an issue with was the initial Lightburn setup for this machine. Unfortunately, you skipped over that part in your video. How did you initially add this machine to Lightburn? My system did not appear when I selected the find my laser button. I see yours says the device is a Monport JCZFiber.

@JustinCiriello 3 ай бұрын

He sure did. Did you get it sorted out?

@MasterTheNEC 8 ай бұрын

Any tips on learning what all the power, time, and frequency settings need to be. I am new to Light burn and trying to learn the settings and what they mean in terms of my engraving. Thanks in advance.

@ArtByAdrock 8 ай бұрын

It’s mostly just trial and error as each machine will have different settings. Lens type, machine power, etc will all account for different settings and results. I have a few more videos on this machine coming out shortly so stay tuned for those. If there’s something in particular you’re looking for let me know and I’ll try and help.

@MasterTheNEC 8 ай бұрын

@@ArtByAdrock Thanks, good for me is I got the exact machine you are testing out now.

@janton58 9 ай бұрын

Thank you for your presentation. I did buy this model and have set it up this weekend but have not mated it to my LB, yet. I also use Lightburn, too. Did LB automatically see the unit? did you have to do any calibration? I also picked up two additional lens (150mm and 100mm) and I purchased the D80 rotor.

@ArtByAdrock 9 ай бұрын

Yes LB saw it right away. All I had to do was install the core file that came on the USB. No calibration or anything else though. 👍🏻

@MasterTheNEC 8 ай бұрын

Hey Fella. When you installed you laser you needed to install files from the USB. Which files do you grab from the USB (ezcad) in Light burn. I didn't see you do that step.

@rmpbrown01 6 ай бұрын

Can you change the lens on this particular machine? Their site shows the GI60 to have a working area of 7.9" by 7.9". I don't see an option for a 12" x 12" config. I also don't see which lens comes with this machine. Your description says yours has a f-theta 200mm lens. Was this the lens yours came with?

@ArtByAdrock 6 ай бұрын

Yes mine came with the 200mm. You can change the lens as well. I just picked up the 70mm lens which I’ll be showing soon. 👍🏻

@rmpbrown01 6 ай бұрын

@@ArtByAdrock So a 70mm lens shows to have a work area of 2.7" x 2.7". My assumption is that you can get greater detail with the 70mm lens at the cost of less work area? I look forward to your next video. I just pulled the trigger based on your review and I also purchased the enclosure and got the rotatory with it as well. I'm super excited!

@ArtByAdrock 6 ай бұрын

@@rmpbrown01 yes that is correct.

@sticustom 9 ай бұрын

The two extra screws. If you spin the vertical arm 90 degrees clockwise could you laser something off the side of the main plate that might be too tall to fit under the laser? It that what the two screws might be for? I hope that made sense.

@ArtByAdrock 9 ай бұрын

I don’t think so as there’s already 4 screws holding it on. 🤷🏻‍♂️ they could just be extra or more to use as tie downs for the included clamps. Good thinking though

@sticustom 9 ай бұрын

@@ArtByAdrock thanks. It just looked like they would align with the holes on the vertical rod. Thank for your reply 👍🏻

@RTCDigitalS 2 ай бұрын

Can that fiber cable be disconnected ?

@Chag69420 16 күн бұрын

This looks a hell of a lot like a ComMarker B4...

@niceguydmm 7 ай бұрын

How you like the laser. I just got a Monport of Amazon. I got the 50w Raycus. It seem to be fine. Shipping was great. I am nervous though since some people said stay away from them.

@ArtByAdrock 7 ай бұрын

I’m happy with mine. Figuring out all the different settings is the tedious part but I think it works great

@MasterTheNEC 8 ай бұрын

Greetings Fella - So, I just ordered this model and I do not intend to use EZCAD. So, do I need to do anything such as pull any files from the USB? I just want to start right away with Lightburn but does it have the settings that are for our G160 Laser? Again, I have the same unit as you so I am watching intensly as I see other videos talking about calibrating, importing drivers and so much that I am a bit overwhelmed. Any advice you can give is appreciated.

@ArtByAdrock 8 ай бұрын

To use lightburn you’ll just need to import the core file that is on the usb. When you’re adding the device in LB it will ask you for the file, just click on it from the usb. That’s pretty much it. Mine was calibrated but there’s always a chance you might need to do some slight adjustments if you change lenses or things aren’t lining up perfectly.

@MasterTheNEC 8 ай бұрын

@@ArtByAdrock Thank You!

@ArtByAdrock 8 ай бұрын

@@MasterTheNEC no problem, if you have any issues just ask. 👍🏻

@user-ff7ds6cs2o 8 ай бұрын

I noticed the machine came with a ground wire but it doesn't look like yours was hooked up. I just got a GP30 and have the same wire but no explanation as to where it connects to on the machine. Did you connect yours?

@phillipjensen4362 5 ай бұрын

Any where on the frame you can connect it to and run it to a ground

@sarreqteryx 8 ай бұрын

Is it possible to make it so it can automatically vary the settings, based on the test grids, so you could do multi-color engravings (in one go) (on a per-medium basis)?

@phillipjensen4362 5 ай бұрын

In light burn and ezcad you can do this . If you doing text lettering . As far as picture. lightburn will make life a lot simpler to assign colors

@tommylth20001 7 ай бұрын

Hi, does it rust and the color de-colorised? I tried mark black on SS304 and it rusted after weeks..

@phillipjensen4362 5 ай бұрын

If you’re making colors or mark on stainless steel. That is oxidation. An oxidation will come off eventually. As forest rust on stainless steel, I don’t think so.

@TheQbigfish 29 күн бұрын

my monport 60w doesn't show Q pulse. Do you know what I am doing wrong?

@ArtByAdrock 29 күн бұрын

@@TheQbigfish if you’re using lightburn, go into edit->device settings and under the “ports and laser settings” tab, click on enable Q-pulse Width Setting on the right. It’s probably toggled off.

@TheQbigfish 29 күн бұрын

@@ArtByAdrock I found it after viewing a few more videos about it. Thank you for your prompt response!!! I stayed up all night playing with it and I forgot I have daddy duties today!!! ha ha.

@phillipjensen4362 5 ай бұрын

So no Rotary axis. It’s probably a good thing you didn’t .because the lifting arm does not go high enough. to get focus when you have the rotary axes .on the table. With the 200x200 mm lens . 20%power / 500mms/185khz/75ns/.004mms for a nice purple