it's great to see an honest review. I really appreciate this, because yeah, all gear videos these days they get sent the product and aren't allowed to give their honest opinions without breaking relationships with the company. Which is obviously fair, but guys like you are what the guitar community needs. What also annoys me a bit about most KZfaqrs, is that they will do one video on the gear, then never talk about it again. There's overwhelming amount of plugins and modelers these days. I wish these big channels would do an ultimate shootout video of every modeler they got sent, I mean they're gathering dust on their shelves anyway.

Okey the tone capture feature is the huge point that makes me want one. No need for the kemper. Fuck yes. Nice video! Also keep your honesty and i agree with the advertisement inside my ones loved KZfaq channels.

Thanks for your honest words! Totally agree! I‘ve purchased this device a couple of days ago. The GE300 sounds so much better with good custom-IRs, you‘re right! Havn‘t tried the tone capture yet, but I will capture my Mesa Boogie Mark IV/A soon... Keep up the good work, dude!

I was really surprised! The captured tone sounded sooo much better than stock/built in fireball. Very very close to the original amp.

One of the better reviews I've seen for the GE300

Man thank you for your stance on sponsored videos. I pay youtube not to have any commercials now all the channels that I've been watching are doing commercials themselves mid video. I am dropping every channel that does that.

Tone capture sounds great, personally I still think helix takes the cake. But for the applications you suggested it sounds great!

If you're more into the tone capturing feature you should definetly check out the Mooer Preamp Live - it is way cheaper and the tone capture is very accurate as well! ;)

500 seemed also okay to me, but considering how good the tone capture is, I would say the price is right. Get this for the tone capture and effects.

Well said sir! I always enjoy your videos and appreciate your honesty

@Soulhenge, would you buy it after 2 years since this review for 450EUR new? BTW great reviews, I love it! Thanks, great job, niiiice playing skills and really honest opinions. I do appreciate :)

At last, someone who can really appreciate the ENGL amps. I see a lot of negativity about ENGL on the internet, which in my humble opinion is totally biased and non factual. Everytime I plug in to an ENGL I am right at home, the heavy channels are always crushing with great bass response and clarity. My next one is going to be the savage mark 2. Oh and there built in noise gates are awesome as well. Great comparison though. Not a bad device

That nailed the tone. That’s super cool.

Your riffing is always so damn tasty!

TONE CAPTURE 95 %

Keep your style in these videos. You do an excellent job telling the truth. Most other objective reviewers are more likes politicians. Fanboys of a brand or are just trying to get free $h!t I suppose. Love your style. Great player too!

the tone capture is superb, yes it lacks a tiny part of the solid tightness and focus the tube power amp kicks into the sound, but all the high mids are there and in a mix dosent shit up the bass players day so superb alternative for everyone, lightyears on from the valvetronix i used twenty years back, good times, good vid bud

Well done sir. First video I've watched of yours and I subscribed.

That's a cool feature. The captured tone seems just a little thinner than the real amp but, pretty close.

great video man!! 100% honest!!! i love watch your honest videos!!

sounds great,could you share the tone capture please..

ENGL FIREBALL !!!

Great review ! Could you compare tone capture and kemper profiling of real amp? I'd like to buy a GE300LT as a backup of my Kemper... I need to know, if GE300 capture the sound as good as KPA.. Many thanks.

love your video and your attitude my friend !

So glad I bought one

Make a video about ge 200 vs ge 300 tone conparison! Greetings

Good video. thank you for your honesty.

I own an ge 200 and can relate a little using IRs changes everything with that unit. I'm just a bit curious as to why you wouldn't use it for recording. The tone capture sounded great man. If you switched back and forth enough I might have not been able to tell the tone capture from the real amp to be honest.

I am quite tempted to get this thing over the helix because of the tone capture feature. I hope the helix will make this kind of technology someday. I love the effects of the helix..

Mooer ge250 is way cheaper, smaller, pretty much does the same things. Less buttons but it's buttons are multi function. It has the tone capture, expression pedal merge, and trails.

Love your reviews!!! Honest it is 😎🤘

Great video, thanks. I get the LED's are a problem, easily fixed I'm sure. Biggest downside for me is latency between preset changes. Other platforms have eliminated this by using snapshots or scenes. Mooer needs to do the same. Does anyone know if you can import tone captures from other sources, like you can import 3rd party profiles on Kemper?

Thanks man. I seen 7-9 videos and they all = shit. you give me what i want. ENGL

Hey Soulhenge, i've seen the review of the ge300 and tone capture... the price is a problem, and the pause between switchs being pressed too. So, i was thinking, did you tried the Mooer Preamp live? and the mooer radar? Those are simplier solutions.

Because I am impressed with this unfairly valued processor Mooer GE300, since it is a super processor and I do it to the best, you have to know how to program this in a professional laboratory, and super friendly ..And it is so good because it has 2 SHARC processors the same as it has fractal

Let's summarize: tone capture, amp sim, IR and lot of effects, synth and too expensive? I do not think so. Mooer Preamp costs close to 400 €. When we subtract the cost of Mooer Preamp, the cost is much closer to Mooer ge 200. The price seems good, especially since it offers something different than the competition, so it's difficult to compare it to Line6. Of course, I would like the equipment to be cheaper, but if we approach it as I described earlier, it makes sense.

Ooof, i may have to sell my soul for this...

after I was looking for rk 5 fly rig (not on stock 2 weeks), by mistake I saw a review on youtube...than I bought Pl 1 fly rig...and it is all what I need: analog, clean, distortion, boost, tunner...small, xlr out, 1/4 out, headphones...

GE-300 Lite today is only around $450 !!!

Done on the point

great review!

The captured tone was a big improvement over the preset. Now, if Mooer had a central platform to share presets and captured tones....

Share tone capture?

Can captured tones be exchanged with other users or downloaded off the net?

their website has more amp profiles than you can shake 2 sticks at.

Good review but HOW did the sustain, dynamics, articulation etc compare to the real amp?

I have some questions. Can you put different amps and effects in the left and the right stereo fields. ex clean ampw/ chorus on right channel , a little distortion and delay on the left ? Is there a limit to the daisy chain of effects or their order ? I have a Boss synyth and most of the instruments sound the way they are supposed to after some eq tweeks. However the demos I have seen on you tube of this unit have failed to demonstrate that. Ola Englund has one and the flute doesn't sound like a flute, nor the trumpet. He however, isn't changing his playing style and that could be a part of the problem on his video. Your opinion or even a video on the subject , thanks. Is the expression pedal when used as a wah, programmable ? Does it have several types and can you control their range . I use a GT 100 by Boss and a problem was it had too much wah roll over, but I changed it at low to 20 instead of 0 all the way up and 80 instead of 100 all the way down and it allowed for a much more subtle wah that I can also use as a tone control to some degree as well. Thanks.

Hi. I found you awhile back...The tone capture does sound great I'm old and trying to figure out a way to record and play live with the least amount of equipment. That said, I don't think I would use this. Not because of the tones but partially, but also because of the fact it's too hard to get good tones without trouble. Have you tried the Theta, or the Atomic preamps modelers? Just wondering. Oh, I watched your video on the model 200 and you seemed to like it. What model Ibanez was that?

I know that with the 4 cable method the ge 300 can only "listen to" or rather analyze the preamp of an amplifier but with the new tube amp expander which has an fx loop basically after the poweramp section of the amp you're using you could probably make the ge 300 analyze the whole amp right?

Thats so cool!

Can't you just download the effects package of Helix to your Mooer?

omfg that sounds eerily close

In a mix you can't fell the difference

No shade on the last video either really liked it and the objectiveness but it is a cool concept (capture), pedals/guitar as well as amp/cab ^^ Haven't watched the video yet so I don't know if it's good either xD

Great vid as always. Any chance of sharing the tone capture

Can it capture tones like the GE Labs from Kempler? Or can we find Kempler profiles for this?

Hey man, how bad is the latency between patch switches REALLY? I saw that you said something about it in your first impressions video I believe but if you could rate it Useable/Non Useable for live situations that involve distorted guitars to clean guitars and back. How bad is the drop out? Thanks man! -JDD

Can you share this setting?

@Soulhenge: Thanks for your demo man! Are there any news about that gap between switching Presets? I really want to buy the ge300 😉

Hi, great video. But I have a doubt. How do you get the Drive or Gain of your amp only pressing the B button (Source)? I was following the same procedure, but I only got the clean sound.

Is the fireball 60 the same size as a fireball 100?

I was wondering... Can you Tone capture then export the patch and import the patch to the GE200?

From the price point of view, how do you compare this to Kemper?

Holy shit lol I'd take that to GC and take whatever amps I wanted lol bada bing bada boom

Damn that was so close. I'm seriously interested in get one of these. Do You think there is a noticeable difference between the ge300 and the ge250? Well done buddy! 👌

Is this unit worth 550 euro? I have the chance to get the mooer for $799 CAD which converts to that. A helix lt is $1400 here. Opinions? I’d mostly be using the tone print function as I have actual amps too

What would you use for recording besides a tube amp?

Duuude can i please have your impulse response that you used haha. The tone is so clear and not fizzy at all holy crap. I tried tweaking my IRs in Archetype Plini but my sound is so shit XD

milian is that can be using for bass ? let me know

Did you share tone capture? I would like to try it.

Hi how does the GE feels compared to the real amp?

Did they fixed this light thing??????

Hi friend, please check out GE300's newest firmware updates(1.2.0 beta), thanks for your suggestions & opinion

think you could play live with the GE 300 using something like the Seymour Duncan Powerstage or an Orange Pedal Baby and a 2 x12 cabinet? and how is your guitar build coming along?

The original is more fat and roundy, but in blind test/recording don’t care.

Hi, SoulHenge! Just a question. Do you use LUT filter or manual color grading?

Nice one!!!!:) Again, what cab ir was that?

Fiddling, tweaking and every other knob f****** sucks. Every digital odyssey ends with a Kemper. Every other "analog" downsizing rig solution ends with a Bluguitar Amp1, imho. I claim to have tried and tested almost every modern solution but for me... as I said.

And I still dont know how its done

Hey bro... u can load IRs in boss gt1000 also... 😁

It does seem like a good product overall but it just still seems like it's too expensive. The tone capture is cool but what happens if you don't have access to a good amp? Then you're stuck with crappier tones, right? I still feel like Mooer just doesn't have the reputation to charge that kind of money yet. If you are already within reach of Line6 or something else established, why go for second or third best? And what happens if you're on tour with the Mooer and it dies? Line6 or kemper or axefx are not too hard to find, but what about this thing? It could be a big problem.

IS THAT A GAMEBOY ADVANCE?!?!?!?

Hey. man ! Pod hd500x or mooer ge300?

2023 ???!!!

I like his playing

Гармониками в нём и непахнут

captured tone sounds quite similar to the original. still, price is too high for a chinese processor.

Seems to me you just wanted to pick on this product to make a point and prove you were impartial and then realised you picked on the wrong product, and that it is awesome.

Any way l could tone capture a guitar plugin with this ? 😂

Lol. Doesn't we all want the best sound AND having the smallest price? Hahaha. $700+ is really not bad at all when you're comparing Helix, GT1000, or Headrush, etc.

want to sell it to me???

Sorry Hunter

Can the captured tones be shared (like IRs)?

If you don't think it make sense to keep it, give it away😬😬

8:10 That's why I stopped watching other guitar-related videos (Except for our lord and saviour, Mr. Wibblespoon's nephew)

I never hear clean or edge of breakup, like what a gigging guitarist uses 90% of the time... only pointy guitars with metal tones by bedroom players. I would love to hear what the tone capture does with a cranked blackface princeton *sadface

"KZfaq is just Advertisement"....Yes. Get yourself an Apex preamp and try to say something nice about it.

Jesus Christ your videos are less exciting than a drive through Saskatchewan.