More Fanuc Robot handling of the Shear-Hog inserts
Рет қаралды 810
7 жыл бұрынThe old robot video was too small since I took it from instagram so I shot another one and added cheesy music. I was asked after a post on instagram how the inserts are held down during grinding. It's all in the pin and collet system.
@Thunderbelch 6 жыл бұрын
Too cool for words; thanks for sharing! I really enjoyed John's tour because it showed the full range of your tool grinding operations from manual jig magic to full robot overlord 5 axis awesomeness! I'm always happy for any peek into that world...
@alfredlyon27 6 жыл бұрын
Thunderbelch Thank You 🙏🏻
@Max_Marz 7 жыл бұрын
What is your current bottleneck in the process? Is it the grind time or is it the handling?
@alfredlyon27 7 жыл бұрын
Max Maruszewski there is no bottle neck currently. I have the robot running at 30% because it takes just under 4 minutes per insert which plenty of time for the robot to drop off a finished insert and load an unground one. We are making approximately 350 inserts per day and can't keep them on the shelf.
THE PROCESS ザ・プロセス
Рет қаралды 138 М.
Asian Process X
Рет қаралды 6 М.
Immersed
Рет қаралды 121 МЛН
TechFreeze
Рет қаралды 23 М.
Fantastic Machinery
Рет қаралды 522
Alan Baker (founder of AB Tools) tells me how excited customers will be when they receive our tools.
Alfred Lyon
Рет қаралды 292
Teaching Tech
Рет қаралды 340 М.
Pochinka_blog
Рет қаралды 4,4 МЛН
Rj Mobile 01
Рет қаралды 11 МЛН