MOST Complicated CNC Machining Toolpaths Saved for Last

Рет қаралды 64,262

Күн бұрын

The art of finishing the beast pump housing on the Heller CP 6000 using Kennametal tooling. We give you the tips and tricks of CNC machining this part programmed in Mastercam.
For more information on Blue Origin:
rebrand.ly/TiBLUEORIGINCNC
0:00 Finish Machining the Pump Housing
1:05 How to Finish Machine this Part
2:00 How to Finish in One Operation
2:18 Using Tool Axis Vectors
3:30 The Angle of the Tool
4:12 Siemens Control
5:00 Mastercam Collision Protection
5:58 Blue Origin
6:25 CNC Machining a Beautiful Finish
Learn more at:
titansofcnc.com
Subscribe to our podcast channel:
@titansofcncpodcast
/ titansofcnc
/ titansofcnc
/ titansofcnc
/ titansofcncacademy
Join our community Discord! / discord
___
THANK YOU to our Partners who make this content possible:
Kennametal - rebrand.ly/TiKennametal
Heller: us.heller.biz/titansofcnc/
DN Solutions - www.titansfordn.com/machines
United Grinding - hubs.ly/Q013zHpC0
Mastercam - rebrand.ly/MastercamEDUTiYT
Horn - www.horn-group.com/us/
Tornos - bit.ly/3MDcqLh
Blaser Swisslube - rebrand.ly/TiBlaser
Siemens - USA.siemens.com/cnc4you
Solidworks - rebrand.ly/TiSLDWRKS20
Markforged - bit.ly/Titans_Markforged
GF - rebrand.ly/TiGF
Tyrolit - rebrand.ly/TiTYROLIT
Mitutoyo - rebrand.ly/TiMitutoyo
Haimer - rebrand.ly/TiHAIMER
Schunk - rebrand.ly/TiSchunk
Kaeser Compressors - us.kaeser.com/titan
#Machining #Machinist #Engineering

Пікірлер: 94

@raymondcampbell929 5 ай бұрын

I love watching your videos. I've been retired for 2 years now and I still like to see all the new maching and all the new stuff.

@theodoreshasta7846 5 ай бұрын

The sophistication and capabilities of these machines and associated controls are remarkable. Really enjoyed the video and the narrative. Thank you!

@IceCreams62 5 ай бұрын

Nice work. But now i'm curious on how you will machine the duct of this pump ?

@J.DiPietro 5 ай бұрын

a long curved end mill. duh...

@lomobster 5 ай бұрын

dremel tool

@danl.4743 5 ай бұрын

@@J.DiPietro That's what I thought too. 👍

@cyber2526 5 ай бұрын

normally it would be a casting, this is just a demo

@k53847 5 ай бұрын

@@cyber2526 I think, in theory, you could sinker EDM it. In theory, no idea if it even possible in reality. I certainly suspect it isn't something that anyone would choose to use as a manufacturing technique except in weird corner cases like a down factory and a 3 month lead time.

@danielstrubel1016 5 ай бұрын

Love the HELLER AND SIEMENS CONTROL

@adamhayes2528 5 ай бұрын

Incredible work Barry, what a process this has been!

@markdavis304 5 ай бұрын

Nice work Barry! Cool to see it go from raw stock to a nice finish!👏

@bikashdadarmbdanger2353 5 ай бұрын

Finishing art of the job is mind blowing🤯

@vonpredator 5 ай бұрын

Awesome finish! on the outside... now... please show how you machine out the housing with that tangential curve... 🤓 I'll pop some popcorn for that video

@benjaminshropshire2900 3 ай бұрын

Actually, what I'm wondering is how valuable all the work on the outside beyond the rouging pass is? Does it actual make the part better at it's job? It's a rocket so weight matters and it's most likely a highly stressed part so sharp inside corners are a no-no, but it would be interesting to see how much the client could have saved by setting the outside tolerance as -0.0/+0.125 or something similarly grotesque.

@johgude5045 2 ай бұрын

@@benjaminshropshire2900 the smoother the surface finish, the more rigid the part will be since cracks cannot start so easily. In technical terms this is called notching effect

@johgude5045 2 ай бұрын

@@benjaminshropshire2900 sure on the inside, tolerances are more critical

@benjaminshropshire2900 2 ай бұрын

@@johgude5045 The stress concentrations that cause fatigue issues are only for notches. If you do a surface with a bunch of flats with convex edges between them that shouldn't be an issue. You could even do a surface with a large diameter ball end mill with large step overs and it shouldn't be a hard fatigue issue to work with.

@shaniegust1225 5 ай бұрын

Love these kinds of videos guys! Nice work 💪

@Metaldetectiontubeworldwide 5 ай бұрын

Nice to see the 'discobal' on your desk, it automaticly lets me smile and remember, The disco extravaganza video 😂😂🎉Grtzz from the Netherlands Johny geerts

@donniehinske 5 ай бұрын

Awesome work Barry!

@wellox8856 5 ай бұрын

amazing work!

@Sara-TOC 4 ай бұрын

It's been fun following the progress of this project. Awesome job, Barry! I most enjoy watching the Heller in operation. 🙂

@TC_Leader_HELLER_US 5 ай бұрын

Nice work Barry

@frankensteincreations4740 5 ай бұрын

This is the exact reason why all pump volutes are sand cast lol. This is an insane amount of work! This is a tiny volute also… I rebuilt a submersible waste water storm pump that had a volute on it about 3 feet in diameter lol. Imagine machining one that big…

@MA-ns5ov 5 ай бұрын

I watched the roughing of this part. cool to see the finish. I'm in Quality (Dimensional Inspector). Depending on the tolerances, this would be a fun part to scan. I'm using Verisurf, and it runs off mastercam. So this is cool. Thanks!

@simsonlaikongleong3785 5 ай бұрын

Sick. I now wonder the snake loop have a big hole?? Seeing the small flange there doesn't have a hollow hole. Is this part of the centrifugal pump?

@julieannepatterson3295 4 ай бұрын

Mate Thats just too good.

@shaneprice2102 4 ай бұрын

Bad ass bro!

@marcin23228 5 ай бұрын

Ok how you drill hole in this Twisted pipe

@challacustica9049 5 ай бұрын

How does this work if it doesn't have a hole in that spiral?

@denverfeuerbach2824 5 ай бұрын

Was wondering this same thing

@texasermd1 5 ай бұрын

It appears these are connections to independent systems in close approximation in this part. Possibly for stability or simply tight quarters requiring these specific connections.

@Tunkkis 5 ай бұрын

I think it's mostly a demonstration part, not a functional one.

@jotef73 5 ай бұрын

I think, the part isn't finished yet.

@nils1953 5 ай бұрын

The inside is just left hollow from the casting. Or not sure maybe this is 3D printed. either way I think the part is already hollow, just doesn't have machined surfaces. Which frankly is stupid as, if anything it's the only surface that should be as smooth as possible, for improved air flow. The outside is just for aesthetics and is a waste of time.

@ludacrips76 5 ай бұрын

Man, that sheet metal on that Heller looks like it's taken a beating.

@deathblowhere 5 ай бұрын

What about internal profiling of the volute?? Really interesting to see how you can reach there even on 5axis..

@jakubhostinsky4482 5 ай бұрын

magic

@superstripes7646 5 ай бұрын

i want to see the flange hole finished

@luckgrip252 5 ай бұрын

This is the part on which you wouldn't want a "unwanted" toolpath to happen. I would babysit the part all the way through from start to finish

@Defender_928 5 ай бұрын

Wow 😮😮

@Mr._Butt 5 ай бұрын

Full runtime of the hole part?

@danhnguyen435 5 ай бұрын

Boom!

@14rs2 5 ай бұрын

Am I the only one who thought this part was way bigger than it actually is because of the other videos?

@nyanlauncher7350 5 ай бұрын

lit

@jakerawls4727 2 ай бұрын

Will there be a video porting it?

@Metaldetectiontubeworldwide 4 ай бұрын

I'm watching the video for a second time , and wondering how the heck you milled the inside bore of the snail ?! I'm breacking my head over it , si plz help 😂 lol.. Grtz from the netherlands Johny geerts

@thetechtipguy9410 5 ай бұрын

just wondering, how much would a part like this cost?

@wellox8856 5 ай бұрын

my guess is probably in the 10s of thousands but idk

@ExplodingPinappleHD 5 ай бұрын

Ya I’d guess north of 10k$

@Wall3ye406 5 ай бұрын

$21,564.32

@adammiller4879 5 ай бұрын

Infinite if you machine the inside of the housing, if it’s just the outside, and it’s a 1 off part, I’d say 20-30k

@benedictchoong 5 ай бұрын

Ok, now my question is how do you drill open the side holes/ports of this part? It's quite deep and its spiral. 5 Axis only can get you so far in terms of clearence

@SimonPEdwards63 5 ай бұрын

When are you going to work on the internal features?

@sergejposejn7167 4 ай бұрын

Think about HyperMill this absolut perfectly for 5 axis and CAD

@vladimirrudnev9643 5 ай бұрын

It's really beautiful... but.. what's the point to make perfect surface on this part)?

@lumpygasinavacuum8449 5 ай бұрын

Work NC CAM is good too and cheap

@apr8386 4 ай бұрын

what about the volute???

@hafizirfanali2498 4 күн бұрын

❤❤❤❤

@kayzejones 5 ай бұрын

What was the total runtime on this manifold?

@mikebrowne5152 5 ай бұрын

Do the bore!🤑

@canadianalabai2836 5 ай бұрын

18 years experience and I’m interested

@chrisbarron6658 5 ай бұрын

will this full program be up for sale? for learning experience.

@Sam-sl1uy 4 ай бұрын

Pretty sure something similar is on fusion 360 for free

@leonschumann2361 5 ай бұрын

somebody tell donny his tornos multiswiss waiting in the back

@brettfafata3017 5 ай бұрын

How much would a part like this run? In my work I've designed small parts that came out to over $500, I don't even want to imagine the cost of this beast.

@pvtimberfaller 5 ай бұрын

Looks like a lost wax casting job to me. We have been casting pumps like this for probably over 200 years and just cleaning up 3 faces and tapping some holes. Crazy work from a machining standpoint but pretty stupid in terms of cost per unit.

@tone3560 5 ай бұрын

roasted

@pvtimberfaller 5 ай бұрын

Jus sayin. Remember the story about NASA spending millions to develop a pen that would work in zero gravity. The Russians used a pencil and until recently their rockets crude and simple did all the heavy lifting.