Most EXPENSIVE Tiny Boat Build offs.
Рет қаралды 86,033
3 жыл бұрынCheck out our website: TBNation.net
Alumacraft Parts & Cost List:
________________________________
Electric:
6 awg duplex 50ft - 142.00
8 awg duplex 50ft - 82.00
10 awg duplex - 100ft - 75.00
12 awg duplex - 100ft - 65 00
14 awg duplex - 100ft - 55.00
Marine connectors 150.00 +
Heat shrink 30.00
Fuzes: 20.00
Breakers 100.00
Batt selector switch 35.00
2nd switch 25.00
Wire ties and looming : 50.00
Switch panel 45.00
6 gang block: 40.00
6/6/12 split: 60.00
Braided sleeving 30.00
In line fuze holders, 20.00
Total = 1,019.00
Framing & deck - 2,000.00
Fasteners & hardware = 200.00
Channel lid supports - 50.00
20oz Carpet - 150.00
Orthodek sheets 150 x 3 = 450
Amazon foam 80.00 x 2 = 160.00
Blacktip foam = 80.00
Gatorskinz soft touch = 139.00
Black Nonskid = 139.00
Gray Nonskid = 179.00
Cam latches 50.00 × 10 = 500.00
Pull latches = 20.00
Struts & joints = 60.00
Total = 3,928.00
Livewell box = 100.00
Flow rite premium kit = 360.00
Oxygenator = 130.84
Bilge pumps = 70.00
Thru hull fittings = 50.00
Bilge hose = 26.00
Total = 736.00
Total = 5,683.00 Estimated Raw Materials
_________________________________
Battery charger: 470.00
B.O.S system = 247.00
Fuel Gauge (Lythium) = 249.00
Dakota Lithium 100AH = 3,000.00
CMC power tilt -649.00
Two Solex 10" megas - 5,000.00
Garmin Echomap 106SV - 1,700.00
Garmin Panoptix - 1,500.00
Humminbird Mega 360.00 - 1,100.00
Minn Kota Ultrex i-pilot link 3,100.00
Yamaha F25 - 3,800.00
Alumacraft V14 - 4,00.00 plus
24,806.00 External
5,683.00 - Raw
30,489 - TOTAL COST
________________________________________________________
Blue Diamond TinCanCrew Official Build
________________________________________________________
Aluminum kit - Framing, lids, welded boxes, livewell, cooler, sheets, rivets & powder coat.
4,500.00 for framing
700- 1,000k for wiring
240.00 in Cam Lever Latches
200.00 Gatorskinz
350.00 Flow-Rite
100 - Underwater LED's
65.00 Bilge Pumps
300.00 - Three kits of Pour Foam
15.00 - Cup holders
1000.00 in Hydro Turf/ 8 sheets.
300.00 - Flow Rite
120.00 Custom Nav Lights
649.00 -CMC Power tilt
SS hardware and fasteners - 100.00
Decals - 100.00
9,039.00 - in raw materials estimated
______________________________
4-bank Minn Kota Precision Charger
- 400.00
4 Batteries AGM/lead acid batteries.
- 600.00
Three 7" G3N helix with RAM mounts
- 2,300.00
Ram phone holder
Motorguide 80lb thrust trolling motor
1,700.00
5,000.00 in external mods
Total cost - 14,039.00
Aa
________________________________________________________
General Parts Lists - Linked to our Website:
________________________________________________________
Livewell Systems tbnation.net/collections/mari...
LED Light Kits tbnation.net/products/led-lig...
Nates’s Dry Hatches tbnation.net/products/dry-sto...
Aluminum Build Kits tbnation.net/collections/alum...
TBNation’s Web Store: tbnation.net/
TBNation’s Amazon Store: www.amazon.com/shop/TBNation
Check out my new channel! / @mikedoesdiy
Aluminum DIY Kits: tbnation.net/collections/alum...
EVA foam: tbnation.net/pages/search-res...
Boat Carpet tbnation.net/pages/search-res...
__________________________________________________
Check out my new channel! kzfaq.info/love/p03... & Merch* tbnation.net/collections/tbna...
Check out our full website at tbnation.net/
* GET EXTRA HIDDEN VIDEOS OF THIS BOAT PROJECT:* Patreon.com/TBNation
High-Quality EVA Foam tbnation.net/pages/search-res...
Full Amazon Store: www.amazon.com/shop/TBNation
* TBNation's SOCIAL MEDIA platforms*
_______________________________________________
*Instagram link:* / tinyboatnation
*Instagram: Handles*
@tinyboatnation
@tincancrew_official
@Fireant_official_1
@tinyboatnation
@titan_of_DIY
@KayakDIY
_______________________________________________
*Find us on Facebook
Our Official Page: / tinyboats
Our Group Page: / 1705177409792306
______________________________________________
Music:
From KZfaq Free Creator Library.
or Art-List.
______________________________________________
Recommended Channels:
@fireantfishing
@AnthonyJonesBrigadeBoats
@JDSOutdoors
@KayakDIY
________________________________________________
Disclaimer: I am not a professional fabricator or builder.
I am a DIY Creator supported by this channel's audience
to put out concepts for people to view.
Modify your boat at your own risk.
@jeSuperfly 3 жыл бұрын
Sweet builds, no doubt about it. Don't forget about your average Joe viewers though! How about a budget challenge build? Maybe you and the crew square off with like a $1500 budget or so and poll your audience for the winner!
@skeeteronthewater1568 3 жыл бұрын
Thats my thing with these ones he's building is like your putting 30k into a 14 foot boat like I thought he was doing this to compete against the big ones and while yes 30k is less than the 60 to 90k......its still not reasonable....if I have 30k I can buy a full size 6 year old bass boat with all the bells and whistles it does seem kinda strange lol
@iwantosavemoney 3 жыл бұрын
@@skeeteronthewater1568 even at 10k you can buy a pretty nice bass boat.
@ertren6 3 жыл бұрын
@@iwantosavemoney at 10k you can buy a brand new one with a 50 hp motor, fish finder, trolley motor, etc.
@smithhomestead1589 3 жыл бұрын
Yea I mean he said $3-6k you can do a good build on a 16’ deep v. You can also look at paying by the hour, plane tickets expenses. That can be $3k-8k. So over all you’ll pay $6k-14k in a boat to be done in 4days? Like my boat an 1987 v has Johnson 15hp motor limit is 900 ish pounds. Just me and maybe my young kids. But I want it for bow fishing also.
@xxxxxxx3760 3 жыл бұрын
It would be nice to see something like that diy is made for the people that don’t have much money to blow on brand new stuff that’s why it’s called do it yourself when he said how much it cost it’s a big turn off for me to even try to do one
@davidfarley145 3 жыл бұрын
This was awesome! I love honesty! You get what you pay for and your boats are awesome. Worth every penny. I’m self employed and also building a boat that should be finished in a couple weeks. I think when you add up your hours of putting one of these things together I would have been money ahead to have taken it to you and had you build it! I commend you and your group for the quality work and products your sell.
@mulespur4806 3 жыл бұрын
It don’t take long to add up, I bought a old 16’ aluminum boat for $600 and old 40hp, now have $7,000 + in it after I-pilot link and finders and cmc tilt. New deck and paint the works. And did it all myself from watching your vids!
@kenmccarthyfishing 3 жыл бұрын
The whole team is awesome and I greatly appreciate all the inspiration,you’ve given me the “confidence “ to be able start my 1436 Tracker Topper and one the best parts is the Amazon store where I bought everything I needed,thank again TBN Team ❤️👏💪
@a7xmyfist 3 жыл бұрын
You are great at what you never stop. Just got a fiberglass boat needs lots of work. Hope to see you work on one to see the possibilities
@jskipperddg80 3 жыл бұрын
I swear if this guy starts a boat company. Selling complete boats. He’d definitely get my business and I’m sure lots of people.
@tbnationoutdoors-nateeckhold 3 жыл бұрын
🤔
@royquinn2319 3 жыл бұрын
Awesome video brother. You do amazing work! Just picked up an older tracker 170 Tx and hope to get the decking and hatches re worked. I’ll be wintering in Havasu this year and leaving the boat with a buddy on the River if I decide to travel again next summer. I’ll bring my boat by to get an estimate for work on what I mentioned, and possibly some suggestions on lighting. Stay well and take care, hope to meet you sometime mid October when we get to town.
@4ryanthomas 7 ай бұрын
You all did great!! Mike I appreciate your breakdown and walkthrough!!
@Matthew4Nineteen 3 жыл бұрын
You're an inspiration dude, never stop!!
@pspD1 2 жыл бұрын
Awesome vid bro! Keep em coming. Just picked me up a new 14 footer just to mod it as a tiny boat! Itll be my winter project! Respect bro!
@jjmcg9688 3 жыл бұрын
I did get the Johnson lower unit repaired, starter replaced, and electrical replaced. I also bought the BOS and fuel gauge afterwards. You guys are the best. Thanks again @tbnation
@grandtheftundead6634 3 жыл бұрын
I love the break down videos! keep it up champ!
@benhightowerv 3 жыл бұрын
I'm getting ready to do my 14x48 but I'd be down to build a wooden skiff. Let's go!
@561arcadia 3 жыл бұрын
How much does all that weigh?? If a boat has a 800 weight limit would all that kill the ability to have more than one person on the boat
@jjmcg9688 3 жыл бұрын
I had more weight on that boat in its first edition (lots of wood, too much foam) and with 3 adults and 2 kids it still went 19mph.
@561arcadia 3 жыл бұрын
@@TinyBoatNation either one.. I got a 1985 Crestliner commodore 14ft with a 800 lbs limit. I weigh 375 and my son 100..so just wandered how all that affects weight limit
@lmt-adventures620 2 жыл бұрын
I bought a 14’ Gregor v shape for 300. Home built a trailer for it. Picked up a 89 Evinrude 35hp short shaft 2 strokes for $50 in unknown condition and fixed it up as a rookie boat mechanic (tons of research). Ran like a champ when tested it did 32mph but boat is empty just a temporary center console for testing. Next up imma DIY a cheap version of what these guys do for under 1k. Plan to repurpose a lot of materials and minimize purchases. Goal is overall cost under 1k and I don’t need advance electronics just my motor and trolling and lights.
@chrisroberts3963 3 жыл бұрын
A lot of comments on here about it costing so much. Well how much do people out there spend on their dogs and cats? How much do people out there spend on their sup’d up F150 or other vehicles? It all depends on if you, yourself, want to spend the money. You can’t buy these elite tiny boats at a dealer. You either have to do it yourself or get Nate (maybe another Tin Can crew member) to do one for you. For the price you get custom and high functionality. Just go to bass pro and really look at what you are paying for. Most of them are crap until you get into the big bucks boats. They have no storage, live wells are small, the layout is crap. If I had 20K to spend would I go with a plane Jane bass pro boat or a fully decked out elite tiny boat? Another factor is durability. These elite ones are all aluminum, you never have to worry about rotting wood underneath. And if you don’t have the money then do it yourself and on your timetable. Mike’s non-welded lid system is killer for a DIYer.
@silas5483 3 жыл бұрын
Question: if you were to do a 14’ boat, but, it would only have a front and rear deck, no middle, and it’s simple, not too many hatches, simple drain, and a small platform for a trolling motor up front, how much would it cost?
@garagedoortec4083 Жыл бұрын
dude we got burned a few months ago from a guy who sold us a bass tracker with stress cracks and leaky rivits!! I was so bummed working on it with 3 days to go for our camping trip!! Wish I knew your channel before I went and bought tracker!! After watching your channel rebuild boats!! Dude it’s inspiring I totally wanna do one now! 😂 maybe I’ll rebuild our new boat cuase the hatches our poorly made and the vinyl floors is already pulling up and I haven’t even got her in the water yet so annoying
@garagedoortec4083 Жыл бұрын
2023 Tracker Pro 170
@fireantfishing 3 жыл бұрын
🤣🤣🤣 the end is hilarious. Great vid
@graysonwoolley4070 3 жыл бұрын
nice video! looks super good
@krustysurfer 10 ай бұрын
Absolutely mind blowing 🤩🤩🤩 thank you for sharing all your knowledge and wisdom!
@TinyBoatNation 10 ай бұрын
My pleasure!
@krustysurfer 10 ай бұрын
@@TinyBoatNation blessings and aloha to you and the tribe
@curtwarkentin6167 3 жыл бұрын
Wow, those boats have a pretty heavy investment into them but it really shows.
@user-ud8js5jt9n 3 жыл бұрын
Love the work it's amazing don't get me wrong but if I'm going to spend that much I'd rather buy an all aluminum 2021 Lowe Stinger 175C with motor and trailer for 17k, because at the end of the day your still on the lake with an old ass boat!
@freedomhowe82 2 жыл бұрын
I'm with you on that why spend 17k into a 600 dollar boat when you can buy a bigger and better boat for 17k,
@greenpighunter6930 3 жыл бұрын
Nice. Had a guy that wanted to buy my 14x48. I said $16,500 and I thought he was gonna have a heart attack. It's has over $7G's in electronics on it. I really blew his mind when I told him that figure doesn't include the man hours.
@tbnationoutdoors-nateeckhold 3 жыл бұрын
I’m that deep in mine. With talon. Lithium. Ghost
@ertren6 2 жыл бұрын
Yeah that is an insane price. For a few k more, homeboy could have a full sized bass boat lol
@johnbreitbach9803 2 жыл бұрын
Wow .. great video, you really know how to trick out a frickin boat ... man, great job !!!
@smithhomestead1589 3 жыл бұрын
Keep it up. I want to build my $650 boat. Being disable veteran hard to do a lot of it myself.
@regkershaw Жыл бұрын
Top video top content. Any chance of any content or information on where to see a aluminium boat get bent repair with filler and painted. Not much on KZfaq on this topic that I can find and with your channel it would be great to see. Keep up your great work 👍
@TinyBoatNation Жыл бұрын
Bent repair?
@regkershaw Жыл бұрын
@@TinyBoatNation Thxs for your reply. I'm in Australia and have a 20 year old boat and have been look at your content and have been thinking of revamping it. Only thing is I have a few dents in it and would like to have it straight. So that would be filling the dents and repainting it. But not sure in process nor materials to use on aluminium to fill dents and help get the hull straight again.
@hook9line5sinker94 3 жыл бұрын
Have you have added a steering column in a John boat on one of your builds, like from scratch? Is that even possible?
@mikefeimer5928 3 жыл бұрын
Nice job! Are you looking to do another boat?
@ryan011183 3 жыл бұрын
Love the video.
@primelegend9504 3 жыл бұрын
I love watching the videos but these prices are a little ridiculous. Bang for bunk, price for size how ever you want to look at it. It just doesn’t seem worth it. Cutting out the trolling motor, 3x helix 7s(about 3k$) 14,000 - 3,000 = 11k + boat/motor 2k. 13k total minus electronics. That’s more than picking up a used bass boat, which typically comes with a trolling motor and some sort of fish finders. I bought a used 1989 ranger 361v powered by a mercury 150. Came with a Minn Kota trolling motor(not fancy bare bones 12v TM). Had original black and white fish finders that barely worked. $2,700. What iv done/added: Main Console: helix 10 MEGA SI g2n($500 used) Mount: Ballzout 9” ($50 used) Bow: helix 7 MEGA DI ($550 new) Mount: Ram ($50 new) TM foot pedal tray(free because it got damaged in either manufacturing or shipping, got refunded and didn’t have to send it back, so I repaired it) Carpet: $300 New batteries: $300 Misc: $200 estimate Total: $4650 I got lucky in finding the used stuff in good working condition. But even brand new I’m no where close to 13k. Hell I could add an Ultrex/mega 360/helix 10 mega DI on bow/atlas jack plate and still be under $13,000 and that including if I bought my current helix 10 Mega SI and ballzout mount new. I always thought it would be cool to build a tiny boat for specific tournaments and fisheries, but not sure if it’s worth or feasible. Would love to see a budget build:$1000 or less for boat, $1,500 or less build budget cap.
@tbnationoutdoors-nateeckhold 3 жыл бұрын
Totally understand. But some people want a ranger in a 14/48. Or 16/48. For small boat tournaments. My area is 25 hp restrictions. Lots of 16’. 20-30k builds. These guys want what they want. To fill the void that other companies miss
@tig3rBite 3 жыл бұрын
A budget is your budget. Most of these videos are really here to help DIY type people and show us what goes on behind the scene. Sounds like you're on path with DIY. Just appreciate TBNation..
@xxxxxxx3760 3 жыл бұрын
It would be nice diy means do it yourself an if your doing something yourself most people don’t have that kind of money
@paul.aragon 3 жыл бұрын
Glass boat mods...can't wait. How many manpower hours were put into each of these builds?
@offgridwhitetails8768 Жыл бұрын
I’d like to see you break one down today brother with all this damn inflation. I buy and sell late model bass boats for a living and we’re selling used now for what the owners paid for them new.
@mikejoned7148 3 жыл бұрын
How come your not putting on the diy power poles? was that more of a experiment or didn't work as well to your standards . Just asking because I am in the middle of building mine . Is there something i should know ? not worth the time or is it ?
@justinmcgee2931 3 жыл бұрын
You should do a 1500$ budget build. Nice video by the way
@williamfrancis2116 3 жыл бұрын
Do the lights in the compartment, s stay on all the time the lights r on or do they have plungers buttons on the ground side like a car door
@kylewyatt272 2 жыл бұрын
What would you do with a 10’ lowline boat?
@TheNutzandBoltz 2 жыл бұрын
You are me but with the bravado to go for it. Awesome, totally awesome.
@seahawks75 3 жыл бұрын
You guys are badass
@tonym.9876 3 жыл бұрын
14K? Wow. For that price you can get a multi-species Ranger. Did someone contract you to do this?
@luckycharms1254 3 жыл бұрын
I was thinking of getting a 14ft one that you did .... how much would it be for labour on top Or is the 6k all in wit labour ?
@luckycharms1254 3 жыл бұрын
@@TinyBoatNation I do it with my car stuff all the time. But never attempted on a boat. Especially the wiring and stuff but I really admire what you guys are doing and would pay to get it done 🙏🏼
@jjmcg9688 3 жыл бұрын
You should’ve included all the runs I made to the store and food. Then I might be higher than the first build.
@scottespy6602 3 жыл бұрын
Could you tell us the weight added to each boat and possibly average weight added to the boats you build. Love the chanel by the way
@scottespy6602 3 жыл бұрын
@@TinyBoatNation thank you I appreciate it
@Beamerboy_ 2 жыл бұрын
How fast is the v14 with the 25hp Yamaha?
@dougwilliams7667 2 жыл бұрын
Could you do a fiberglass rebuild with aluminum framing etc ?
@dougwilliams7667 2 жыл бұрын
@@TinyBoatNation where are you guys located?
@v8consumption 3 жыл бұрын
My 2017 lund impact 1850 with 150pro xs and 9.9 motor fully loaded was 15k with about a dozen bad rivets I fixed.
@storypunman 2 жыл бұрын
Great builds, but I hope you guys spend as much time on the water fishing as you do building.
@lifesbetterontopfishing1762 2 жыл бұрын
Can u do a budget build so only spend on stuff to build the boat no motors no sounders speakers etc just the build
@hunternoel5378 2 жыл бұрын
Do you build them for regular consumers
@coltonappel1701 3 жыл бұрын
How much do you make off of a build?
@kadenstevens5386 3 жыл бұрын
Thank you i thought you forgot when i asked about a month ago
@anthonyvelasquez79 2 жыл бұрын
I got a 14ft 1968 chrysler vhull big fisherman that I was gifted with a brand new motor looking to convert like that 14ft craft. I can drop it off in havasu
@hookywithhunter9449 3 жыл бұрын
Your most recent video says it’s private and I’m not able to view it
@C_Tutt 3 жыл бұрын
This should be a history Chanel show like gas monkey garage lmao
@kevinjackson6301 2 жыл бұрын
How much for a gen5 framing
@barsdeepoutdoors 3 жыл бұрын
I think you should do a budget build for like teenagers and stuff that would be cool.
@El_Scorcho_ 2 жыл бұрын
Not only teenagers need this lol 😂
@barsdeepoutdoors 2 жыл бұрын
@@El_Scorcho_ haha yeah😂
@photofather1 3 жыл бұрын
You dont need an élite tiny boat... Just some lumber some aluminum angle some square that you can get all over the country .. And some love and sweat. ive built 7 boats over my 48 years a kit was and still is not needed
@guardianangel5254 3 жыл бұрын
I know a old vid. But i dug deep and i can not find a answer. Cost is 2 to 4 l. But what is the added weight? I ask cause my current vehicle can tow 1k.
@guardianangel5254 3 жыл бұрын
@@TinyBoatNation thank you for the timely answer keep on keeping on and doing what you do man.
@trendypips1346 3 жыл бұрын
Does anyone build kits for these?
@matthewdombroskas7634 3 жыл бұрын
Awesome and confusing
@dmillz23 3 жыл бұрын
I don't understand why latches cost so much lol
@eltigredetejas2328 3 жыл бұрын
I need to bring you my old ranger
@luischavez5037 3 жыл бұрын
Savage
@kennethdavis459 3 жыл бұрын
How much for you to build me two boat's
@kennethdavis459 3 жыл бұрын
@@TinyBoatNation 👌 Thank you so much
@noahdboss1195 3 жыл бұрын
do a budget jon!
@jjmcg9688 3 жыл бұрын
???
@justinmcgee2931 3 жыл бұрын
@@jjmcg9688 he means a budget build. And I second that (noahdboss)
@jjmcg9688 3 жыл бұрын
@@justinmcgee2931 my name is Jon and it is my boat. If it was a typo I get it but just ironic. Thought he was accusing me of spending or needing a budget.
@El_Scorcho_ 2 жыл бұрын
@@jjmcg9688 im pretty sure he meant a budget jon boat lol. Congrats on the build tho. So damn beautiful.
@pitts3219 11 ай бұрын
I want whatever you’re all smoking!
@Snowy4459 3 жыл бұрын
16k + what’s labor cost?
@DrXKnows 2 жыл бұрын
@@TinyBoatNation I'm interested in a build. I'd like a good build for lakes.
@Fajah69 3 жыл бұрын
Are you saying our cheap boat with our cheap mods are not ELITE?
@Fajah69 3 жыл бұрын
@@TinyBoatNation i was just kidding. Thank you for the videos
@jimmywallhanger8402 Жыл бұрын
lmfao 3k for a DL battery
@phatfree151 2 жыл бұрын
Get back to the roots of this channel.....Budget boats. I have a 91 landau 1446 I don't have the means to throw 10-20k into a boat. But want to build the best I can with what I have. I'm using this boat for all of the cannels around me in FL so don't need a motor right away maybe just a good trolling motor. I have less than 4k to build or my wife will murder me.
@cichlidman09 Жыл бұрын
Long story short... Buy a new boat lol
@goblue3090 Жыл бұрын
Geez. This isn't realistic for the average guy. Do a budget build. A realistic budget build. They are very cool but no way. I'd just go buy a bass boat.
Anthony Jones
Рет қаралды 74 М.
Tiny Boat Nation
Рет қаралды 923 М.
Tiny Boat Nation
Рет қаралды 324 М.
Andrew Upshaw Fishing
Рет қаралды 99 М.