Most Powerful Circular Saw? Dyno'ing DeWALT, XGT, Hilti, Ridgid & More

Рет қаралды 84,643

11 ай бұрын

Our lifetime of TOOL RANKINGS ! torquetestchannel.etsy.com
XGT rear handle is 40% less: amzn.to/3Ohswve
Ridgid is $99: amzn.to/47j0LuX
5Ah powerstack + Charger currently $118! amzn.to/3P0Y36c
DeWALT: amzn.to/3Qu43W5
Which cordless circular saw makes the most power? Every brand claims to have industry leading power, but surely that can't be true. Today we take a look at the 1st half of contenders on our list in the form of the DeWALT Power Detect DCS574, Makita XGT GSH01Z, Hilti SC 30WR-22, Ridgid R8657 and Kobalt KXCS 124 to see which has the staying power to take on the rest of those at the top.
~We may earn from qualifying purchase via the links above~
As always, the creator of this channel works in product development for Astro Tools, who don't make circular saws but always consider multiple sources when looking at a tool!

Пікірлер: 385

@ihadalife1177 10 ай бұрын

Excited to see the dewalt 60v next. Thing is a beast.

@anthonyvargas8704 10 ай бұрын

Amen

@NateDawg0007 10 ай бұрын

Please test the skil worm drive saw. I really want to see how that beast performs in instrumented testing.

@luisprieto4589 10 ай бұрын

Doesnt surprise me that Makita pulls this off. By far, the best and smoothest saws ive used. Also, how compact it is, and I bet it would score the best for less vibration.

@mtasubwaymartasubway 3 ай бұрын

Nope, Hercules for the win

@rossb5593 10 ай бұрын

I'm putting my money on the DeWalt 60V Flexvolt. That thing will rip anything without bogging down. Ripping 2 inch thick LVL. No problem.

@jeffmorefield 10 ай бұрын

I'm with you on that. That saw is a monster, especially with a 9Ah FV battery. FlexVolt to rule them all!

@dumbelldoor610 10 ай бұрын

You should see cordless vs gas chainsaws. Maybe make an adapter on the spindle of it

@TorqueTestChannel 10 ай бұрын

Gas is pretty easy, engines already rated in HP can convert to watts. Cordless, we've found their drive shaft outputs are each pretty unique and hard to adapt to a motor so far

@ionstorm66 10 ай бұрын

@@TorqueTestChannelwhy not just use a chain drive? Just cut the end off a bar and mount the motor to it with a sprocket.

@TorqueTestChannel 10 ай бұрын

@@ionstorm66 Are there any chainsaw chains that fit correct that dont have teeth? We'd rather keep most of our arms in testing

@schkljf 10 ай бұрын

@@TorqueTestChannel chainsaw+bench grinder= teeth go bye bye

@96Dak318 10 ай бұрын

@@TorqueTestChannelinstall a bike sprocket where the chain drive attaches and use a bike chain, you can mount the chain saw to a jig to keep tension on it

@Manu__R 10 ай бұрын

I have the Dewalt 60v DCS578B, it's a beast, and it feels way more powerful than the milwaukee circular saw I use at work (which I think is the 2732-20). And when I bought it, it was $170, roughly the same price as all the other dewalt circular saws.

@Engineerd3d 10 ай бұрын

I bought the Makita hypoid saw, the thing is a total beast. Mine is plug in. But still a beast.

@pflaffik 10 ай бұрын

Makita make the best saws, and when its most powerful in addition its an easy choice. Had the 7.5”XGT almost 2 years, the magnesium base fits directly on Makita rails, the cut quality is amazing even with standard blades, still didnt need to fit fine tooth blades.

@R3dN3xEmeka 10 ай бұрын

It would really be great to see Bosch in the mix for these big tests.

@timothynewman4813 10 ай бұрын

Great video as always! I’m really excited for the new tool testing that’s gonna happen soon, both from Milwaukee (the insider ratchet looks really cool) and the Astro tools you helped design!

@user-xu5yq5nu5h 10 ай бұрын

Outstanding channel! Very accurate and worthy testing of actual arbor output, no bogus claims cutting materials of variable density. The most capable saws should be the Flex rear handle on 24V Stacked Lithium 10AH battery and DeWalt Flex rear handle 60V on the largest battery they make. Interested to see the Skilsaw rear handle worm beast! I have all the most capable cordless and found them to meet and even outperform the best 15AMP corded! Again great channel! Keep up the superb work! Subscribed

@Silky_boi 10 ай бұрын

Being a Makita guy, I’m excited, but at the same time, that Flex is the equivalent of a samurai sword in a tornado🌪️🗡️

@luisprieto4589 10 ай бұрын

I'm all Makita, especially for saws. I use Makita saws for their smoothness and quality. I'm sure the other XGT saws will be plenty powerful, and I'd bet much smoother than the others.

@petermuller3995 10 ай бұрын

@@luisprieto4589 I am pretty happy with Makita too, the XGT saws are unfortunatly not that light anymore. And I do not use Makita for chainsaws.

@luisprieto4589 10 ай бұрын

@@petermuller3995 I personally don't have a chainsaw, but if I did I wouldn't buy Makita for that. I actually like a little bit of weight on my rear handle saw. For me, less vibration is the most important thing in a saw and Makita is the best there.

@Clayshooter100 10 ай бұрын

I hope you pick up a 5ah or 8ah makita XGT battery at some point. They really add power to these saws.

@Ruudwardt 10 ай бұрын

Yeah. For cross cutting small battery is fine. For ripping 5 AH makes a difference.

@joshuaking34 10 ай бұрын

DeWalt's 60v saws are monsters. I've had people joke about my "outdated" Flexvolt tracksaw until they see it in action.

@UncleIvan1 10 ай бұрын

track saw?

@proscriptus 10 ай бұрын

It'll just take a hit in scoring for the cost of batteries.

@JT-lq4yd 10 ай бұрын

@@proscriptus Those flexvolt batteries are pricey, but Dewalt often has sales going on. Example, I got the 578 model with 2, 9 ah batteries and a 380 reciprocating saw for $450.

@joshuaking34 10 ай бұрын

@@UncleIvan1 Correct, DCS520.

@KeterMalkuth 10 ай бұрын

@@proscriptus In addition to what the other commenter stated, the 60v batteries are comparable to other high voltage batteries, and are able to be used for other applications like weedeaters. Not to mention they're cross compatible with your 20v tools, so they provide a lot more value when examined as an eco system.

@bartfoster1311 10 ай бұрын

I have the XGT rear handle 7 1/4 and love it. It is a little heavier but noticeably more powerful than the older 18x2 lxt. The bigger 10 inch XGT is a beast too! I could mail you one to try out.

@jaredlapierre1304 10 ай бұрын

I want to see how the 60v dewalt does, compared to a 20v Milwaukee circle saw the power difference is night and day.

@henrymahoney7072 10 ай бұрын

20V Milwaukee?

@omniferousswan593 10 ай бұрын

m18 is 20v max@@henrymahoney7072

@jimpowell6102 10 ай бұрын

Good stuff, can't wait to see the next batch of saws!!

@Dirtyharry70585 10 ай бұрын

So last fall I bought a ridgid tool only for $89. Also own six 4 amp batteries so my deal crushed your chart👍🏼It’s a pleasure to use, weight below my ‘89 porter cable corded.

@justinhartsell4418 10 ай бұрын

Definitely should try the 60v flexvolt dewat it has twice the power of any other cordless I've used and not much more expensive than the 20v

@wim0104 10 ай бұрын

don't underestimate the 36V Metabo HPT rear-handle

@rossb5593 10 ай бұрын

If you checked his chart of upcoming tests it's on there. this is just Round 1.

@justinhartsell4418 10 ай бұрын

@@rossb5593 excited to see what it does compared to others. I do know from personal experience it's a beast though

@christopher3963 10 ай бұрын

I have the non-flexvolt XR and it sucks, wish i paid a little more for the 60v capability

@rossb5593 10 ай бұрын

@@justinhartsell4418Fully agree. I have owned it for 2 years and still going strong.

@ThriftyToolShed 10 ай бұрын

Awesome comparison. I would like to see how the Makita XSRO1Z 18V X2 rear handle compares for sure. I have one if you have trouble finding one for any reason.👍

@michaellinner7772 10 ай бұрын

I really like your channel, it's packed with great information. I have to say though that very few jobs have a supervisor standing behind you keeping track of exactly how long you take to complete your job or how much force you have to provide to do it. Thanks for the unbiased comparison.

@TorqueTestChannel 10 ай бұрын

Oh most definitely, you have a point. We work on the automotive side of things, and really its just about less annoyance, wear and tear on your body. If I can have an impact do something in 2 seconds rather than listening to it for 10, it adds up at the end of the day in my general fatigue working with power tools.

@engineer_alv 10 ай бұрын

I want to see the Bosch PROFACTOR GKS18V-25CN. There's a more expensive track compatible one with the -25GCN designation but it should not make any difference in performance; it just brings a control panel with speed selection and battery life

@amateurmountainradio 10 ай бұрын

Yes seconded

@TrixieDK 10 ай бұрын

Very good video. I would also be interested to see the Bosch Biturbo tested.

@andrewziegler2608 10 ай бұрын

Wow your channel is growing. It wasn’t that long ago you were at a few k. Congrats.

@anfernyjackson9013 10 ай бұрын

Great review! Could you do a vibration test on them in the future like you did with the angle grinders?

@matthewf1979 10 ай бұрын

Excellent job on the data, format and presentation. I wish you reviewed computer parts and other tech 😝

@javier-pr3mr 10 ай бұрын

really cool, interesting and informative video as always, thank you for the effort you put on every video. I would really like to see the Hercules saw in this comparison, hope you can do it. regards.

@TorqueTestChannel 10 ай бұрын

kzfaq.info/get/bejne/eNlpbLCIqsi-e2g.html

@LukusCseh 10 ай бұрын

Surprised you didn't include an actual Skilsaw, which is largely a genericization for 'circular saw' in many areas, that is how synonymous it is with circular saws. Heck, Skilsaw was the first circular saw. That being said, fantastic video as always, and I cannot wait for future circular saw comparisons!

@TorqueTestChannel 10 ай бұрын

Need blade right

@starseeddeluxe 9 ай бұрын

Here is the new Skil right blade cordless. Looks like a really nice saw, but some reports of battery failures. SKIL PWR CORE 20 XP Brushless 20V 7-1/4 In. Circular Saw, Tool Only- CR5440B-00@@TorqueTestChannel

@JosephSmithBMXMAN111 10 ай бұрын

Would love to see the flex in-line 6 1/2 inch saw stack up against the rest

@247Combat 10 ай бұрын

Me too

@AndrewSpencer2 10 ай бұрын

It was pretty cool to see Hilti make an appearance here, always had a lot of faith in their tools. I just gave up on my Metabo 18v metal cutting circ saw in favor of the M18 fuel 8" metal cutter, what a difference. It's too bad there aren't more options in the cordless metal cutting circular saw arena, that's a video I'd like to see.

@robbiewilliamson357 10 ай бұрын

I’ve always liked Makita and Hilti due to their independent ways.. and always admired Hilti’s heavy, industrial tools.. their 18v stuff has seemed pretty underwhelming, though.

@MrSjirafje 10 ай бұрын

Another great video! Will you also be testing smaller saws like Dewalt's DCS571 of even smaller; the Bosch GKS 12V-26?

@Factoryseconds123 10 ай бұрын

No Flex 💪 I heard the Flex rear handle with the 10ah is a beast

@codyschmidtmann3992 10 ай бұрын

It is a beast

@pkt1213 10 ай бұрын

Good to see I am not missing that much with the 4ah XTR battery.

@TheJensss 10 ай бұрын

Great test! now we are just missing the Bosch saw tested, locally to me in Europe the GKS 18V-68 C PROFESSIONAL is stated to be equivalent to a 1800w corded tool.

@engineer_alv 10 ай бұрын

I think we get that one in North America as the GKS18V-25CN

@gtimbra 10 ай бұрын

This ☝

@TorqueTestChannel 10 ай бұрын

@@gtimbraWe're putting a list together of saws recommended to us during these videos and we'll be doing the bulk of those too. Will add Bosch

@Ana-qd7zh 10 ай бұрын

@@TorqueTestChannel The track compatible version GKS18V-25GCN is supposed to be somewhat more powerful than the standard Bosch saw.

@LvA1994 10 ай бұрын

4thewin tested a whole bunch of 7 1/4 saws pretty thoroughly. The Bosch should be similar to the Dewalt tested in this vid. Makita XGT, Dewalt DCS 577 and the Flex should be the most powerful.

@stepansavelyonok5532 10 ай бұрын

I really didn't expect the makita saw to be on top in this list. I own one, got it to help my plunge saw ripping boards as more powerful one until I got 270mm(10-5/8") saw. It is quite accurate and has a sturdy base, not every saw has it. Can't wait to get hold on 6-1/2" model, should be lighter with same(or more) power.

@teddly2277 10 ай бұрын

I'm not surprised at all. It's makita, they make brilliant saws.

@user-bj5xr5ju4n 10 ай бұрын

thanks for including hilti!

@alexhamon9261 10 ай бұрын

I've been using the XGT saw for a couple years for framing work and it's still running strong. I wish it had the 0° notch the base the M18 fuel saw does for ripping, other than that i have no complaints.

@michaelwoods7770 10 ай бұрын

I love circular saws I use a Dewalt flexvolt 60v. It works as well as a corded saw. Not as much as premium ones mind you. Also there are worm style saws. I also have a Dewalt flex volt non 60v which is a solid saw with a 6ah flexvolt battery.

@christophertomes6777 10 ай бұрын

Now that you have tested so many different tool across battery platforms, I would love to see a video where you compare the companies against each other. Not only testing the individual tools but how many of their tools score well along with how long their catalogs are for tools offered, and change up the math for the value chart since a person wouldn't need to buy a battery with each tool.

@D3M3NT3Dstrang3r 10 ай бұрын

I thought about this as well. They all use the same or similar cells across their product lineups so it would be hard to match like that. Ah to Ah testing would be a good measure though. Runtime and peak output

@christophertomes6777 10 ай бұрын

yea I imagine it wouldn't be the easiest thing to do. Although he could restrict the tests to tier/Ah ide love to see just how each brand stacks up against eachother. The price of some tools are easier to swallow when you have already choked on the initial BatRay cost. @@D3M3NT3Dstrang3r

@mattadams7922 10 ай бұрын

So as much as it sounds good, Flex and Milwaukee will be at a close 1 and 2 and as messed up as it is by the cost to performance metric they use Kobalt and a couple others will be way up there. However Chervon which is Flex, Kobalt, Skil, Ego and a few others or TTI which is Milwaukee, Ridgid, Ryobi, are the best parent companies. So go with Chervon or TTI and be happy with a good warranty and good tools for the price. Hilti would be way up there but they aren't really a fair competitor for most brands and the price point just breaks most people on them. Hilti is for big companies with big budgets cause they do have the absolute best warranty in the tool game. Flex was doing 20 years which was just as good but I think they've stopped it.

@joshuaking34 10 ай бұрын

@@mattadams7922 Or go with a brand who's parent company isn't headquartered in China. Just a suggestion.

@cancelhandles 10 ай бұрын

@@joshuaking34Such as:

@dj-kq4fz 10 ай бұрын

For over half my life I used a corded worm-drive saw which kept the blade on the left and made cutting (the viewing of the cut line mostly) extremely manageable. I would only use the direct drive corded saws for metal or concrete board or other weird non-lumber stuff. But I have to say I've gotten used to the direct drive battery saws to the point where the corded saw seems clunky. Thanks for the great content!

@dicksonnakatoshi 10 ай бұрын

They make left blade direct drive that are shaped like worm drive.

@starseeddeluxe 9 ай бұрын

Both left and right saws, are easy to operate, and the myths going around about a Worm Drive saw being "so much easier" are really not true at all. I have a Makita 1990's Worm Drive (hypoid) drive saw that is so heavy and unbalanced, and it makes great cuts because it's so heavy, but it only turns 4,400 rpms which is way too low for building fine furniture or cutting nice finished laminated woods. A right blade saw, you don't get any dust blowing back in your face. This is the major benefit to holding a right blade saw, in your right hand. You can still do all the same stuff, but the sawdust shoots away from you, instead of back in your face. The left blade Worm Drive saws are ideal for framers who enjoy sawdust in their face (many men seem to love being covered in fine dust and chemicals). But a right blade saw, used with a long straight edge, will have a much higher blade RPM (5,500 to 6,000 rpm) and will produce a better cut, with no sawdust getting in your face. A Worm Drive saw has no dust ejection port, and they create a huge cloud of sawdust that goes straight back into your face.

@histguy101 7 ай бұрын

Some rear handles will shoot dust at your stomach, never seen one shoot at your face. Some of them shoot the dust to the right like the makita

@Comm0ut 10 ай бұрын

TTC is like the Gamers Nexus of tool reviews. Subscribed of course.

@sambrose1 10 ай бұрын

Testing the backward blade saws first interesting strategy. "Blade left for life!"😂😂

@ProblemChild-xk7ix 10 ай бұрын

To each their own!

@traxxgoingwild 10 ай бұрын

I would love to see some Bosch in here. Thank you nonetheless. Very informative.

@RandomGuy-qm3mg 10 ай бұрын

Bosch Profactor GKS18V-25GCN please 🙏

@3vil3lvis 10 ай бұрын

I like the value of straight cuts that guide tracks capable saws bring to the table. It would be interesting to see how these non-plunge guide track saws do.

@spacecat7247 10 ай бұрын

I own a skill mag 77 worm drive. Also a ryobi cordless. Love them both

@colinstu 10 ай бұрын

Love my Blade left makita… curious to see how those compare later.

@skygreen5939 10 ай бұрын

nice! looking forward to seeing how that DCS578 does

@JT-lq4yd 10 ай бұрын

That saw is powerful, I am ashamed to say it scares me 😂 but, I want to see some scientific tests show how scary it actually is.

@skygreen5939 10 ай бұрын

@@JT-lq4yd i have it too; you're not alone - it's a beast. I want to see that scariness quantified, though - I'm going to guess it's about 13 MegaJasons, if i'm doing the SI scariness unit conversion correctly 😂

@JT-lq4yd 10 ай бұрын

@@skygreen5939 We will see how close you are, and I hope to see the video soon.

@user-ze7bl5xd9v 10 ай бұрын

Hey, it would be really interesting to see how the festool hk55, and the mafell would perform. thank you for your great videos

@dustinkrebs8229 10 ай бұрын

Can't wait for the next episode 💯👍

@clarkfos3447 10 ай бұрын

Love this video! I wonder if Makita's new high power 4ah battery will greatly improve the XGT torque test numbers when it's finally available?

@Dude-xv4os 10 ай бұрын

It does! I saw a video from Japan where a guy put the BL4040F on the very first xgt saw (HS001) and it increased the power by 10-20%.

@Dude-xv4os 10 ай бұрын

It does! I saw a video from Japan where a guy put the BL4040F on the very first xgt saw (HS001) and it increased the power by 10-20%.

@12tremblay 10 ай бұрын

Well done sir !

@anthonymorris8891 10 ай бұрын

I have that Kobalt saw and it is definitely a chungus. I haven't done anything very demanding with it, just breaking down plywood and rough cutting 2x# lumber. The only issue I've encountered is the powder coating on the foot was "sticky" and made cutting plywood a bit annoying because it would feel like there was something stopping you from pushing forward. After I buffed on some paste wax it was as smooth as butter though.

@a_w_bukhari7579 10 ай бұрын

“Chungus “ eh? Why you have to get all technical jargon on here

@histguy101 7 ай бұрын

Milwaukees are like that. They stick to the board

@Vraccasil 10 ай бұрын

I would like to see 5AH and 8AH batteries of Makita XGT on this Saw because "Tools & Stuff" already showed, that these two batteries tend to give these demanding tools just a little bit more grunt. Great Stuff so far!

@samv6767 10 ай бұрын

I know the blade's the other way around, but damn I'd like to see the new Ridgid rear handle and the Makita XGT 10 3/4" saw

@darrenhenderson7076 10 ай бұрын

As always I wanna see craftsmen with a 9 ah battery to see if it worth buying and does it make every tool as good as others who do kinda what you do but your best at showing it in my opinion

@noahlehman1408 10 ай бұрын

I would love to see some 3/4 air impacts being tested. I have a Cornwell CAT3225A which is a rebranded IR 2146, but I'd also like to see aircat, CP, Earthquake and the like. As always, amazing content

@scottschreiber6008 10 ай бұрын

Thanks man. I think I will stick with my Bosch 6.5” and 6 ah battery for a total of $132. Gotta love Lowe’s clearance sales!

@KosmicHRTRacingTeam 7 ай бұрын

I score a lot of lowes clearance!!! $139 for an XTR 5 piece kit (which also includes the saw in this test) $79 for DeWalt DA auto polisher, $77 for EGO misting fan, $29 Kobalt impact wrenches (I ended up buying 4, a couple in 1/2” and couple in 3/8” and keep one in each car for a quick flat tire change, which I’ve had 3 in the past month with different family members). The lowes clearance deals are insane!!

@Jacob_Dwyer 10 ай бұрын

The Hilti saw fit and finish is really nice, the included rip fence is super nice. Highly recommend the Nuron gear, its what you expect from Hilti.

@braedenlegge 10 ай бұрын

I just wish their impact drivers and wrenches had a little more power.

@mattadams7922 10 ай бұрын

I just wish for the loot you drop they would be that much better. Pay twice as much to get maybe a tenth more. They do have a good warranty though. Hilti the other big red, for big companies with even bigger budgets.

@stauker.1960 10 ай бұрын

I'm waiting for then to test the drill

@Jacob_Dwyer 10 ай бұрын

Their warranty and customer service is way above average. I have the 4hd hammer drill/driver, they make a 6hd but the 4hd is plenty of beans I've used it to mix a 5gallon of paint and with the excellent clutch also drive .5" brass screws. Been running cordless drill/drivers since the early 80's (black and decker nicad? Makita 9.6v with a Jacob's chuck?) and am recommending the Nuron line.

@Dude-xv4os 10 ай бұрын

I’d love to see you guys get your hands on a 5/8AH 40V pack. Also the Makita GSR01 is an absolute beast. I am trying to get the new BL4040F and the GA053 40V grinder, it’s supposed to be an 1800W grinder and it spins at 10,500 RPM!

@nathanheim248 10 ай бұрын

M18 FUEL™ 7-1/4" Circular Saw 2732 Made many decks, sided and roofed a few houses, framed a couple of apartment buildings, 6ish years old and still going strong as hell!

@zacktalksshopbside 10 ай бұрын

Awesome man

@DampActionRC 10 ай бұрын

Watched, liked, please do one with handheld blacklights. They great for spotting scorpions at night!

@Low760 10 ай бұрын

Rigid is aeg in Australia! I've finally worked it out.

@StefOutside 10 ай бұрын

I think you'll notice a big power difference using either the 5ah or the 8ah XGT batteries.

@Fictitious_Character 10 ай бұрын

Also, looking to see how the 60v 578 does. I bought it a few years ago and it's been a beast with the 21700 9/3ah packs. No reason to rotate it off the work van during these few years.

@willie9899 10 ай бұрын

I'd love to see direct battery comparisons. There are adapters to interchange batteries cross-brand. It would be interesting to see which brand makes the best battery and what it would do for some of the more powerful tools (custom battery included, of course)

@TorqueTestChannel 10 ай бұрын

"Direct comparison" assumes a battery adapter has no losses which is a big assumption I think. Will look into that

@rossb5593 10 ай бұрын

@@TorqueTestChannelThose battery adapters are garbage.

@saiiiiiii1 10 ай бұрын

Can't use most newer batteries and/or tools with adapters because of the missing communication

@riba2233 10 ай бұрын

that would be pointless since they all use basically the same cells, excluding some lipo packs and ofc upcoming packs with tabless 21700's

@LeviVoskamp 10 ай бұрын

@@TorqueTestChanneloff the top of my head, there's the 3D printer guy you collaborated with to make " the Beans" Makita battery. Couldn't you adapt all 18v battery to the same custom ridiculously overbuilt connector. So all batteries end up run through an adapter made by the same guy. It's not the exact same adapter granted, but the advantage being you get an idea of how each battery cells and connector style impacts performance? Or if you got the coin, you could cut off the base of multiple broken tools, solder that to your own custom connector and test max wattage? Idk if it's even worth it, but it would be interesting

@AdHocAtom 10 ай бұрын

I have the Ryobi and I abuse my tools, that thing has so far held up much better than I would have expecting for the low price on DTO.

@casualcarpenter 10 ай бұрын

Even as a Kobalt fan I knew this was coming. The XTR definitely has enough power for the average carpenter, but there is no doubt it isn’t the best.

@NA-pg4lf 10 ай бұрын

I agree about paying so much for a saw. They do have there place but at most construction sites that isn’t it. I’ll buy a $100 corded saw with drop cords all day long before I blow $400 on a cordless. Batteries are expensive , downtime for them to charge , advanced electronics to fail vs a corded saw where the cable may get cut or a broken trigger switch, both of which can be repaired at the jobsite.

@kokocostanza2036 10 ай бұрын

Since a lot of the tools lately have been used (at least as a curiosity) with their bigger batteries, it would be interesting to see how some of the V20 line works with the 9.0 AH battery compared with the 4.0. From what I've watched, the circular saw in particular really wakes up with the 9.0, and I would wonder if the new high-torque could break 700 ft-lb with it as well. I know with my leaf blower, there is a noticeable difference compared to the 5.0 it comes with.

@CrashPro1 10 ай бұрын

Looking forward to the Flex test

@paulwilson2204 10 ай бұрын

Between this channel and project farm there really isnt any guessing when it comes to tools.

@svn5994 10 ай бұрын

Hope you guys test the Flex inline & 7 1/4 rear handle model too.

@Hiasibua 10 ай бұрын

Do you have a Mafell for part 2? A very nice saw.

@OUTILSCLIPSQC 10 ай бұрын

Oh yeah , i hope the milwaukee will be test with the new forge 😁

@fencal2 10 ай бұрын

Would love to see test like this but with plunge saws instead. I would also love to see more bosch stuff particularly with the pro core batteries to see how good they are

@neighborhoodsquirrel2504 10 ай бұрын

For future saw reviews, I would like to see the Skilsaw Mag 77, both corded and cordless, be included.

@duceanahalf 10 ай бұрын

any chance of getting a Bosch circular saw (like a CS10) in the testing?

@Keifsanderson 10 ай бұрын

I think i remember a Project Farm video that demonstrated the Dewalt 60v is the saw to beat.

@realandrewhatfield 10 ай бұрын

Pure torture, waiting for round 2!!

@MattChat56 10 ай бұрын

That Hilti is damn impressive for just being a 22v saw

@thomascummings4192 10 ай бұрын

Would love to see the makita 4131 (or similar) tested my experience with cold cut/metal cut saws make them feel more powerful. Could just be the blades.

@scottabott2631 10 ай бұрын

I have the ridgid brushless 7&1/4 and it's probably my least favorite ridgid tool. Works fine if you set everything up perfectly but if you're even a little off the blade binds way too easily. Might have to pick up one of these 8ah batteries

@rossb5593 10 ай бұрын

The blade binding might not be from the battery. Could be from the anti-kickback being too sensitive. All battery powered saws come with this feature I believe.

@SparxI0 10 ай бұрын

I have the Octane and use the 8Ah Octane battery, it's been pretty good for me. When the blade binds it's usually my fault

@TheSir2005 10 ай бұрын

Any list with wood working tools needs Festool. So the Festool HKC 55 with the 8ah highpower battery would look nice on this one, you just have to wait a few months before that battery becomes available.

@LabiaLicker 10 ай бұрын

I know they are expensive but it would have been nice to see a festool in this lineup. Surely someone can lend you one....

@alfanazzamcraft 10 ай бұрын

The equipment is very high quality, smart American people, greetings from Indonesia 🇮🇩🖐️👍❤️❤️❤️❤️❤️

@kevinlott9626 10 ай бұрын

It would be nice to see how any of these saws would be in a series of drop tests. I've saved my corned sidewinders from a 20+ ft drop many times.

@MustangAficionado 10 ай бұрын

TTC out here with $1800 in saws on a 50-70K view video. Not sure how many people realize that's like $200-250 for a channel. This is a straight up public service

@chrissmith5911 9 ай бұрын

Can you get one of the skill saw worm drives to compare

@techfournine2730 10 ай бұрын

Can we get a tool color melting point and crack point test. I wanna know which color tool is the best!

@ixflqr 10 ай бұрын

I would reaaaaaally like to see a corded portable bandsaw comparison

@lesslypump5254 10 ай бұрын

Hay torque test channel there is a new harber freight impact wrench, model EQ12EXT.

@jozsefizsak 10 ай бұрын

Fantastic!

@kevinholland685 10 ай бұрын

I wonder if you could test swazall, mainly battery ones?

@jonahlowe7649 10 ай бұрын

Could we get a comparison of Air vs battery rachets? I know the Astro 1128 rachet claims 700 RPM I would love to see it compared to the milwaukee M12 high speed

@user-xu5yq5nu5h 10 ай бұрын

Also please test the Skil duall battery rear handle(comes with two 5AH batteries), a great powerful saw priced for the DIY market!

@shanedunlap614 10 ай бұрын

Seems like I got a sweet deal for my Power Detect kit at $249 a few months ago.

@JoeBlow-wx7ug 8 ай бұрын

I have the dewalt 7 1/2in blade 60 v flexvolt and its great. I have cut alot of 2×12 roof rafters, stair stringers and it cuts 4×4s 1 pass. I really like it. However i also dewalt 20v xr and i killed it within 2 monthes.

@sladeoriginal 10 ай бұрын

how about a quick video comparing the much cheaper refurbs to brand new tool. I have a lot of luck with refurb stuff but I wonder if Im missing out on power.