No video
Mini Truck (SE01 EP24) Maxxis MU07 Ceros tires, Review test drive, Driveshaft vibration S83p HiJet
Рет қаралды 39,634
Күн бұрынDecent load of wood on mini today...
then...These are the LAST SET... maybe (insert wife yelling).. Finding decent mud on and off road tires that don't make a lot of noise or rattle your fillings out are slim. After weeks of research and a few sets of tires, these are the perfect on off road combo I could find for the 12” rims and least modification to the truck. Maxxis MU07 Ceros Tire - 23x8R12.
Dropped the rear of transmission because the driveshaft universal was too much of an angle, I think that's where the vibration is coming from. Let you know in the next video...
Had a Paparazzi subscriber spot me while I was in New York! Paparazzi
Part links for the minitrucks:
www.motocheez....
www.motocheez....
Get your keyfob, Merch at www.motocheez.com/merchandise
MiniTruck playlist goo.gl/EztFd8
_____________________________________________________________________
Hijet Climber Mini-truck, this one is a 1992, 7th Gen, S83P, 660cc Minitruck. The “climber” means it has rear axle lock. Amir has about 60 units in stock, he was very helpful.
States legal www.iihs.org/i...
Researching online I did find l lot of information, but Amir explains a LOT more than I knew, he has been in the business for 15 years. Plus if Bubbles in Trailer Park Boys has one, it HAS to be cool!
Don't forget you're buying a used vehicle, check it all out, they're over 25 years old! Some are in much better shape than others. Check for leaks, CV boots ripped, Loose suspension, Clutch slippage, clunks etc. Just like any used vehicle
S83p specs:
660cc 4 vavle 3 cyl engine 48-53hp carburated
weight: 1500 lbs
length 10'8" (128"). width 4'6" (54") w/o mirrors. Height 5'10" (70")
Load capacity 800 lbs
Max Speed 55-60mph
Valve lash cold: intake 0.18mm exhaust 0.25mm
I purchased mine at Boeki USA, www.boekiusa.com has their updated inventory. Ask for Amir and tell them MOTOCHEEZ sent you!
East coast 212-729-8293
West coast 360-990-7770
I know there may be other videos of this.. but this is my Cheezy style!
More info (Wikipedia):
The Daihatsu Hijet (Japanese: ダイハツハイゼット) is a cabover microvan and pickup truck produced and sold by the Japanese automaker Daihatsu since 1960. Despite the similarities between the Hijet name and Toyota's naming scheme for its trucks and vans (Hiace and Hilux), the name "Hijet" has been in use for Daihatsu's Kei trucks and Microvans since 1960, over two decades before Toyota took control. "Hijet", one of Daihatsu's other mini-trucks. The Hijet competes in Japan with the Honda Acty, Subaru Sambar, Mitsubishi Minicab, Suzuki Carry and the Nissan Clipper.
Due to changing products, links, etc, If you want the most recent product links (if these are no good), go to www.motocheez.com and click the section you're looking for (upper right) and scroll down the page for the item.
This keeps the links for all the parts more accurate. These I use and install on ALL my videos. I do not sell any of the items listed. (except T-shirts and key tags.. HURRY UP AND BUY!)
Thanks you for watching, PLEASE subscribe!
▽ Follow MotoCheez on....
Instagram: / motocheez
Facebook: / motocheez
Web: www.MotoCheez.com
Memes etc: Borat.
Music clips: Ride of the Valkyrees
Movie clips: SNL. Dumb and Dumber. Bruce Almighty. Back to the future, Trucker special album commercial
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use.
@MotoCheez 3 жыл бұрын
Part links for the minitrucks: www.motocheez.com/hijet-mini-truck www.motocheez.com/suzuki-carry-dd51 Get your keyfob, Merch at www.motocheez.com/merchandise MiniTruck playlist goo.gl/EztFd8
@lawnfascist4890 5 жыл бұрын
wife in the background..... priceless!
@MotoCheez 5 жыл бұрын
😄😄 that's their job
@CCRider5312 5 жыл бұрын
MotoCheez your reply was priceless 😝😉😁
@MotoCheez 5 жыл бұрын
😁😁😁👍
@kingavegarage8722 5 жыл бұрын
@@MotoCheez SOooo true!
@kalemercer7053 5 жыл бұрын
2:11 BUSTED!!! The boss is going to have your balls now! Love those hi-beams as well.
@MotoCheez 5 жыл бұрын
😄😄😄😄🔥🔥👍😁
@LeonRFpoa 4 жыл бұрын
that's why I got a crazy pontoon boat stereo in mine. The repo man owned it wasn't having it. it's hilarious though to come rolling up blasting whitesnake and this huge super clear sound is coming from this thing the size of a couch.
@MotoCheez 4 жыл бұрын
🤣😆😆👍👍
@vharrald 5 жыл бұрын
Mini's new shoes look right purdy on her and she don't sound like she's complaining that much now either.
@MotoCheez 5 жыл бұрын
Thanks, yes she is happy 😁
@phrayzar 5 жыл бұрын
I think I've gotten a bit obsessed with watching your mini truck vids. Always get a smile when a new one pops up in my feed. And I'n not even into vehicles usually. Keep em coming, and G'day from down under.
@MotoCheez 5 жыл бұрын
Awesome! I have a friend who was my neighbor that lives in manly
@phrayzar 5 жыл бұрын
Manly is pretty close to me. There was an expression in 40's Sydney. If you wanted to give a guy a bit of a roast you would say " You have a body like Bondi, its a long way from Manly" ;) @@MotoCheez
@MotoCheez 5 жыл бұрын
😄😄👍👍
@joshburczyk9245 5 жыл бұрын
Gotta say i love watching the vids, you get me laughing from the movie clips you throw in, cant wait for the next one
@MotoCheez 5 жыл бұрын
Thanks!!
@bruceaplin 5 жыл бұрын
Yep, love those videos you keep making. Ordered the Progressive front 350+ lbs springs, with air shocks and new CV Joint boots. Gotta find time to put them on. (Beep) Thank You!
@MotoCheez 5 жыл бұрын
Awesome. Best springs out there. Haven't bottomed out yet and they ride great!
@nellz442 3 жыл бұрын
Just got myself a 96 HiJet today!!!
@kammelryder 5 жыл бұрын
Good catch on the drive shaft!
@MotoCheez 5 жыл бұрын
Thanks!!
@kylebarns7129 5 жыл бұрын
Love the video!! Wife in background... oh crap... lol mini truck rocks!! Thank you again my friend, looking forward to the next video.
@MotoCheez 5 жыл бұрын
😄😄😄👍
@robertshoemaker6814 5 жыл бұрын
Love the info you put out. Guy across the street from me put a turbo on his and hit 100 MPH. Said it was pretty scary.
@MotoCheez 5 жыл бұрын
I'd need to gear mini up to hit that speed with stock motor. Would be 10,000 RPMs! I'd image it would be scary. My tires wouldn't take the speed either. Would have to go back to smaller road tires.
@offgridpirates4598 5 жыл бұрын
Funny... I just ordered the same tires off Amazon last week.... Glad you like them....
@MotoCheez 5 жыл бұрын
Exactly what wanted
@RC.Time-Crawlers 5 жыл бұрын
I called mine the Warden when I heard her voice SHIT was my go to 🤣🤣 Shit word of the day 👍
@MotoCheez 5 жыл бұрын
Haha! Yeah. She ok with it, just has to comment now and again.
@outthere2 5 жыл бұрын
The more I watch the more I want one. Pretty fly for a mini truck.
@MotoCheez 5 жыл бұрын
😄👍👍
@MikeM-of2if 5 жыл бұрын
You do a great job putting your videos together! I can't wait to get my hands on one!
@MotoCheez 5 жыл бұрын
Thanks! 😁
@LEEWAY8 5 жыл бұрын
In British Columbia these trucks are on every highway, on the regular! Give it a go!
@MotoCheez 5 жыл бұрын
Nice! I drove it today to get the clutch done at my friend's shop, 45 minutes each way, at 55.mph it's 5500 rpm, I don't want to ruin the engine...
@1armedguy4 5 жыл бұрын
Damn that small truck sure will carry a bad amount of wood, surprised the hell out of moi. Cheers !
@MotoCheez 5 жыл бұрын
😁thanks
@ironwolfF1 5 жыл бұрын
"DID I HEAR YOU'D BOUGHT NEW TIRES!" *shit*... Exit, stage right! (Using your best Bugs Bunny voice...) ;-p
@MotoCheez 5 жыл бұрын
😄😄👍👍👍
@andreduplessis508 5 жыл бұрын
Your truck is starting to look great. I used mine to commute (to work on Mondays and back on Fridays), 220km one way. Here in South Africa you really need to keep up with traffic in Gauteng Province where I worked otherwise you are asking for trouble. This means sometimes going as fast as 140km/h (you get used to the sensation - scary at first). Having a 1300cc 16 valve motor helps. The only problem I only noticed afterwards was hearing loss from the constant hum in the cab. (Please ensure that you use ear plugs when driving these cars long distance). My truck isn't used on a regular basis anymore. It is parked in my storage shed. Due to me now working in a more rural part I'm using my Land Rover Defender Puma purely for the bigger wheel diameter due to the bad road conditions. What I do not get is the excellent fuel consumption I had with my mini.
@MotoCheez 5 жыл бұрын
👍👍 that's hauling in a small truck!
@LightbarRepair 5 жыл бұрын
Finally got my mini truck fix in. I can go to sleep a satisfied man now. 😁😁😁
@MotoCheez 5 жыл бұрын
🔥🔥🔥🔥👍 thanks
@williamjanik7743 5 жыл бұрын
By the way, love the videos. Keep 'em coming
@dineshprashad5862 5 жыл бұрын
I love your mini truck
@MotoCheez 5 жыл бұрын
Thanks! Meep!!
@nathandaniel4167 5 жыл бұрын
Liked before I even watched!
@MotoCheez 5 жыл бұрын
🔥🔥👍😁
@72sarge 5 жыл бұрын
If the 4wd engages electronicly, add a switch to disengage. If mechanical, add separate handle setup to engage front when needed.
@MotoCheez 5 жыл бұрын
It's electronic over vacuum actuated, I'm going to have to track down that wire where it goes through the switch.
@MotoCheez 5 жыл бұрын
Additional note, the high neutral low range selector is mechanical when you pull it up into low range it must hit a switch and actuate the 4 by 4 because when you put it in for high you have to push the button to actuate it so I have to find that wire
@thephotographicauditor6715 5 жыл бұрын
Some of the taller lift kits for 4WDs have an angled axle block to ease the driveshaft/axle angle towards the transfer case. Maybe, check into something like that when you address the air-shocks. Longer U-bolts may be required tho.
@MotoCheez 5 жыл бұрын
that's a good idea although that angle doesn't look too far off if you see it in the video it's the actual angle off of the tails peace. Universal joints are only supposed to go 15 degrees Max
@thephotographicauditor6715 5 жыл бұрын
MotoCheez Yeah, The ones I've seen are made from aluminum or steel, similar to a larger wedge door-stop, with a pin/hole in the middle to keep them centered on the axle mounting blocks. I imagine a wood or phenolic piece would suffice for short term testing purposes, IF your U-Bolts are long enough. www.4wheelparts.com/p/pro-comp-degree-shim-99-200/_/R-DFCW-99-200?gclid=EAIaIQobChMI74fZ8fDl4AIVCp-fCh2_QAOREAQYFCABEgKUfPD_BwE&ecmp=s:google_738768949_39642945278__pla-279091861085_Pro%20Comp%20Suspension_EXP99-200_base_US&emlprox=out&ppcfon=1&gp=1&sc_intid=EXP99-200&ef_id=EAIaIQobChMI74fZ8fDl4AIVCp-fCh2_QAOREAQYFCABEgKUfPD_BwE:G:s&s_kwcid=AL!7836!3!172996507362!!!g!279091861085!&SC%20Shopping%20-%20TMG%20Desktop&ecmp=s:google_738768949_39642945278__pla-279091861085
@MotoCheez 5 жыл бұрын
👍👍
@Wearyman 5 жыл бұрын
Makes me wonder too if there would be some way to lift the front end of the engine and tranny up a bit. Put the whole thing on an angle, but higher up so that it doesn't have to drop down to the floor ro maintain proper angle. Might need a custom length shaft to make that work though...
@MotoCheez 5 жыл бұрын
front shaft would be on more of an agle .. raising the front may be a good idea I'll have to look. I test drove just now and noise it totally gone. 5 degrees is ideal according to what I researched 15 max
@croseven17 5 жыл бұрын
Mini Truck going strong! :D
@MotoCheez 5 жыл бұрын
🔥🔥🔥👍
@Therian_Lola_4.3 5 жыл бұрын
Mini truck...fun and practical
@MotoCheez 5 жыл бұрын
👍👍👍😁
@SPLjunkie 5 жыл бұрын
I fucking love this series. I now have to go buy a mini truck.
@MotoCheez 5 жыл бұрын
Hahaha 👍👍🔥😁
@DukeOfTwist 5 жыл бұрын
Some underbody sealer in the front fender wells might quite things a little further
@MotoCheez 5 жыл бұрын
Good idea, or some said dynamat inside
@shawncockrell6007 5 жыл бұрын
@@MotoCheez Both...for the same and different reasons. Outside to seal out the weather and sound dampen...….some thing good, like lizard skin etc, not cheap auto store tar in a spray can. Inside with dyna mat...……, the entire floor with it and under the seats., inside the doors, etc. do it one stage at a time so you and us see what each step does to block sound.
@MotoCheez 5 жыл бұрын
👍👍👍 that sounds like another good project once it warms up outside so I don't stink up the house with the paint
@GoKartsorGoneFishin 5 жыл бұрын
Like#164👍!..thank you for all the videos!
@GoKartsorGoneFishin 5 жыл бұрын
120mph in that truck would be one wild ride!
@MotoCheez 5 жыл бұрын
Thanks, ya. Tires wouldn't hold that speed
@RatdogDRB 5 жыл бұрын
It'll be inktristink to see how the little girl handles the next load of wood after those air shocks go on.
@MotoCheez 5 жыл бұрын
I plan on putting the air shocks on real soon, as far as a load of wood I got to get my kids together again toss it in there for me
@ClaytonGambrel 5 жыл бұрын
Too fast too furious! Mini truck.! BEEP
@MotoCheez 5 жыл бұрын
😁😁👍
@tkskagen 5 жыл бұрын
Maybe make a couple Skid Plates for the Front Differential & Transfer Case? You could use a couple "Large Square Street Signs"... Protect Mini's Belly! Another RAW Video!,😎 -Thomas Skagen Port Orchard, Washington
@MotoCheez 5 жыл бұрын
👍👍👍
@K10wNs-Shed 5 жыл бұрын
Best engine swap in one of these I seen was a little 1.3ltr Toyota EFI converted 4cyl engine. Doesn't increase the speed much, but sure improves torque for offroad.
@MotoCheez 5 жыл бұрын
It'll fit? The motor is almost layed flat in there
@user-iw8kh5gx7b 5 жыл бұрын
@@MotoCheez The Toyota SZ engine (Daihatsu K3 engine) has an oil pan for cab-forward.
@MotoCheez 5 жыл бұрын
Oh, didn't know that. Thanks.
@MrBazuzi 5 жыл бұрын
You gotta take to The Hoonigan's Burnyard! I know that they are building one up too, and I think the comparison would be awesome!!!
@MotoCheez 5 жыл бұрын
I saw they are, that would be fun
@robertross804 5 жыл бұрын
fun truck
@MotoCheez 5 жыл бұрын
👍👍😁
@renoflames 5 жыл бұрын
My Mini Truck has a Place Setting at the Kitchen Table and a parking spot in the Living Room so "BlackTop" can watch TV. My Great Dane sleeps in the Bed. Blacktop Likes that.
@MotoCheez 5 жыл бұрын
🔥🔥🔥🔥👍👍
@clintonkalvig4457 5 жыл бұрын
There was one of these in my high school shop the teacher made the dif lock work in 2wd by jumping the switch that is on the 4x4 selector making the dif lock have power
@MotoCheez 5 жыл бұрын
That's what I'm thinking of trying for axle lock. I want the diff lock off in low, it's automatically on...
@clintonkalvig4457 5 жыл бұрын
@@MotoCheez might work both ways if you switch it it wont know if it's in low
@williamjanik7743 5 жыл бұрын
27 x 8.50 x 14 Kumho Road venture MT should be your next set lol. I saw them on Japanese mini trucks of America FB page. You dropped the back of the drivetrain to ease the driveline angle...a little drop in the front should allow the 3" spacers above the coils 😉
@MotoCheez 5 жыл бұрын
Yeah I saw you have to drop the driveline down so the axles aren't over flexed, I didn't really look much into it because I was worried about the steering shaft Etc maybe one of my next big upgrades at one point but I'm okay with what I have right now. I'd also would need a little more power if I start putting bigger wheels that's why I went with the 23s it's a good combination a lot of hills around here
@williamjanik7743 5 жыл бұрын
@@MotoCheez only another inch 😁. I think the guy that had them basically has the same setup you do. Either way, keep the videos coming and offer the t-shirts in fat man size maybe. I'll pay extra 🤣
@MotoCheez 5 жыл бұрын
How big? I think it goes to 3X. It's a company that handles the entire order that I use
@bertbattersby9220 5 жыл бұрын
Love the videos, insightful and educational.
@MotoCheez 5 жыл бұрын
Thank you!!😁😁
@koffero7440 5 жыл бұрын
To make it go into 2wd low there is 2 switches on the transfer case . One has 2wires off it and the other like 5 wires . If you put a manual switch inline with the 2 wire unit it was allow you to turn off it going into 4wd when you lift the shift handle into low that way it can be selectable
@MotoCheez 5 жыл бұрын
Thanks! I'll look into that!!
@SIONARAFLORIDA 5 жыл бұрын
So you did not put the rear shocks in, and it hauled all that wood so good, up the icy hill, through the swamp, the tires and rims finally came together, you need a light in the cab, how bout a red one? Great vids i watch them as soon as i can, i love whats up mini truck. I KNEW you were thinking engine swap...
@MotoCheez 5 жыл бұрын
Shocks are soon. Yeah it did real.good! Engine swap eventually, I'd rather find another mini and keep it low for the road for an engine swap.
@davisexcavating7144 3 жыл бұрын
Just got me a 91 hijet climber exactly like yours for same price too lol. It’s awesome, got lift and tires on way!
@MotoCheez 3 жыл бұрын
Congratulations!!!
@painsrides3616 5 жыл бұрын
Mini-Truck ....might give my Pitster XTC250 a good run for its money. LOL We'll have to have a drag this summer ;)
@MotoCheez 5 жыл бұрын
😄😄👍👍yes! I want to race the hawk again too with new clutch
@BRANNAZ 5 жыл бұрын
Now thats nice!
@MotoCheez 5 жыл бұрын
😁😁👍
@cricketol 5 жыл бұрын
If I would swap a motor it would be a rx8 with trans and Axel to Max out but there I am I need stock may go with itb with superchrager
@MotoCheez 5 жыл бұрын
👍👍
@martinjohnson2126 5 жыл бұрын
It's been a long time since I have been so hyped over a vehicle...way cool hurry up with the clutch install.how about a 1800cc Goldwing transplant ( your money, not mine)
@MotoCheez 5 жыл бұрын
The glodwong would be a good one too! Anything that's water cooled. I don't want to do it to this mini, but I am looking for another mini with bad motor. Saw one while looking for this one, they're out there.
@MotoCheez 5 жыл бұрын
Thanks,!👍👍😁
@dineshprashad5862 5 жыл бұрын
It is safe and reliable
@Satman82 5 жыл бұрын
Still need to replace headlights to LED. Not much light at night.
@MotoCheez 5 жыл бұрын
I actually purchase them and they're here but I have not put them in yet because I just finished the clutch
@Satman82 5 жыл бұрын
@@MotoCheez Loving the videos! Gets me into the mood to work on my vehicles. On my 01 gmc sierra done 2 wheel hubs, U joint on drive shaft and oil change. On my 03 ford f150 wheel hub and oil change. Next I need to do a tranny swap on my 11 chevy silverado. Thanks for inspiring me to get out and get my hands dirty.
@MotoCheez 5 жыл бұрын
That's awesome. Thanks! Next video is the clutch change..
@zedex1226 5 жыл бұрын
Curses... You stumbled across my secret plan. I have a low mileage spare liter bike motor I'm planning to tuck in once I find the right donor kei truck.
@MotoCheez 5 жыл бұрын
Nice!🔥🔥
@zedex1226 5 жыл бұрын
@@MotoCheez I really only want it geared to do 80 on the freeway. Everything after that is in the low low. Enough torque to turn itself inside out. Charging system is a bit of a hassle honestly. Even with massive stator upgrade in the bike I'd still want to rig some kind of PTO for more alternator.
@MotoCheez 5 жыл бұрын
All true, I'd bet there's a way to PTO off the flywheel
@Chrisb8s 5 жыл бұрын
It would take a little work but I bet you could make a song out of the humming road noise
@MotoCheez 5 жыл бұрын
Hmm, that's a good idea.. I may try what's up minitruck 🔥🔥🔥👍
@joaonobre9003 5 жыл бұрын
Man if you want real torque and good mpg just make a TDi engine swap. 😁 Keep the good work... Love to see this over here ( Portugal )
@MotoCheez 5 жыл бұрын
👍👍😁
@RickCrueger 4 жыл бұрын
You are so much fun to watch! And I learn so much. Now if I can just go to sleep at night without humming ( WHATS NEW PUSSYCAT! Woa, woa! ) Crack me up!
@adriandale6726 5 жыл бұрын
Your wife though 😂😂
@MotoCheez 5 жыл бұрын
Lol😄
@GreyBeardz 5 жыл бұрын
Man don't "drop" the intro like the t-case. Woo a woo a woo.
@MotoCheez 5 жыл бұрын
😁😄😄😄
@Blanddog 4 жыл бұрын
Hey Buddy! I lost track of your series I've been wondering why I have been seeing these tires come through work lately. It's all your fault.. lol Still love your vids keep them coming.... (insert cheesy puff here)
@MotoCheez 4 жыл бұрын
Haha. Good to see you back! Nice. They're a good tire.
@Blanddog 4 жыл бұрын
@@MotoCheez yeah we move 12 sets of 2 today maybe a little bit more. There getting more popular. I hate moving tires.
@MotoCheez 4 жыл бұрын
😆😅😂
@DatBoiOrly 5 жыл бұрын
Can't wait to see you engine swap it and get 12k rpms and 120mph
@MotoCheez 5 жыл бұрын
I'd need another set of tires for sure, these will never take 120mph... Que the wife yelling.
@DatBoiOrly 5 жыл бұрын
@@MotoCheez you can put In some low rpm diffs in it to make it into a torque monster
@MotoCheez 5 жыл бұрын
I'm not sure, they might make a set of ring and pinions for it or swap the axles. But it has high and low range and low range is really low
@MYTOYMAKERZ 5 жыл бұрын
MotoCheez - That mini would take off like a plane at 120mph LOL. To bad you can’t find some locking hubs for the front of it so you could use 2 wheel drive low. Thanks
@MotoCheez 5 жыл бұрын
I'll find what powers the solenoid and get it somehow.
@aserta 5 жыл бұрын
Oh, maxxis makes good tires. I have them on just about everything i have except for the odd continentals and some random D brand and off course regular cars, their compounds are too soft for my like.
@MotoCheez 5 жыл бұрын
👍👍😁
@rnreajr9184 5 жыл бұрын
That is one short drive shaft. It also looked like the angles of the two joints were not equal. I think that's an issue with U-joints. Could CV joints be used to space them? Probably a lot of work. Like the tires and springs on her.
@MotoCheez 5 жыл бұрын
Probably because the shackles tilted the axle a like but the tail piece stayed up high. CV join would work but they're usually longer. Except the type on the newer wranglers.
@jackcaldwell485 5 жыл бұрын
Gearvenders industries use to offer a deal that went in the front part of the T case it was cable drawn that would disconnect the front drive train, it kinda looked like a planerty gear set and the sun gear would disconnect like a lockable hub, ive not looked to see if they still build them , but i am sure anyone that makes under/overdriver units would be able to help ya on that. Take care
@MotoCheez 5 жыл бұрын
The front is what engages the 4x4 now by electric over vacuum, should be easy. Another guy said there's a switch on the Tcase that I can mess with to do it.
@jackcaldwell485 5 жыл бұрын
@@MotoCheez i wasnt forsure if it was like a jeep lever or what , i know i looked into that what i told you on a 98 model expedition i had was awd and i wanted to cut the front out without doing a full solid axle swap in , thanks for the info too i am still researching and teying to find me one
@MotoCheez 5 жыл бұрын
Nice!! They're a blast, like having a street legal UTV
@justinsane7128 2 жыл бұрын
Sure makes sense why it always started so easy but never wanted to restart warm, and leveling out those drive lines will definitely drop the vibration I had a 76 f250 with a 6-in lift and it was atrocious
@LordFalconsword 5 жыл бұрын
Dover Plains, eh? You are in the middle of nowhere!
@MotoCheez 5 жыл бұрын
😄👍 yep
@Odd_Redneck 5 жыл бұрын
is that corrected speed for the size of tire on there? lol those bolts im willing to bet are m10x1.5
@l.a.c.1107 5 жыл бұрын
💚12 🎵🎵🎵🎵🎵whoooaahh🎵🎵🎵🎵🎵💚
@stevegraham121 5 жыл бұрын
People talking about engine swaps. Looks almost impossible and still keep the functionality of the truck. Any performance products from Japan that would allow comfortable cruising at 60mph?
@MotoCheez 5 жыл бұрын
60mph is 6000rpm. I wouldn't mess with this truck I would find one that had a blown motor. I need this reliable and functional even though it is a project
@alk5749 5 жыл бұрын
I’d drop her another 1/4 “ and get some longer bolts. Like what you’ve done to Mini Truck.
@MotoCheez 5 жыл бұрын
I might go more. Want to test it out. Thanks!!
@DannyWalker1949 5 жыл бұрын
Awesomeness❕
@MotoCheez 5 жыл бұрын
TY 😁😁😁
@marknelson2437 5 жыл бұрын
You should do an 80’s hauling ass photo shoot, life begins at 42 mph
@MotoCheez 5 жыл бұрын
Ooh, that's good! The T-shirt company I use is easy to do that.. as a T-shirt that is..
@mikemcdaniel1910 3 жыл бұрын
Did you notice a power loss with the bigger tires? Or a rpm drop? Just got my 95 hijet 4x4 5 speed with ac and dump. I live in the south in SC. I am sure you can relate to needing the ac with your time is florida.
@MotoCheez 3 жыл бұрын
Yes there was a little power loss but not much more than the 23s. From stock yes, noticeable. I need to install my supercharger!!
@mikemcdaniel1910 3 жыл бұрын
@@MotoCheez already looking at the amr on amazon. Please document that for our knowledge
@MotoCheez 3 жыл бұрын
I will! Want to do it soon
@Hammerjockeyrepair 5 жыл бұрын
haha, now I wonder if your wife is in on it for the video or if its like my wife and seriously pissed "did I hear you say you got more tires?" ahahaha
@MotoCheez 5 жыл бұрын
She makes funny comments like this but not really mad.. it's how we joke around.
@Hammerjockeyrepair 5 жыл бұрын
@@MotoCheez same thing here. Shell blow up like that infront of friends just to be an ass but everything I do and buy is either to make money with it, or its already paid for itself!
@MotoCheez 5 жыл бұрын
👍
@1nuttattoo 5 жыл бұрын
Just saw a Honda acty mini truck on the merritt parkway and thought it was you guys
@MotoCheez 5 жыл бұрын
Ha, on the parkway!! Damn
@l.a.c.1107 5 жыл бұрын
The Merritt is dangerous for anyone without a Leadfoot! I can't believe someone went on it with a slow mini🚑🚒🚔
@MotoCheez 5 жыл бұрын
😜
@Indignity12345 5 жыл бұрын
Know what's missing now? Deer Whistles.
@MotoCheez 5 жыл бұрын
👍👍👍👍
@Howard1939 5 жыл бұрын
How much should one expect to pay for one of these gems? I've seen ads for a similar truck from India a few years ago, but those are NEW & likely more expensive than these 25-year-old models.
@MotoCheez 5 жыл бұрын
These go for $4000 and up
@dicklarge1901 5 жыл бұрын
Another mod you could do is a Brodie knob!😃
@MotoCheez 5 жыл бұрын
👍👍😄 that be good for drifting!
@mavericmorph5358 5 жыл бұрын
I was going to mention getting some 14/15in wheels to allow you to put some standard road tyres on her. But that would be defeating the point of having a mini truck. Spending all day swapping wheels around.....Nah
@MotoCheez 5 жыл бұрын
😁😁 if I planned on more road use, I probably would.
@brenthernandez3632 5 жыл бұрын
You should get some of that sound dampening stuff you put on the floor and where ever
@MotoCheez 5 жыл бұрын
Yeah. A few people suggested that I think it's a great idea
@god_mode_on 5 жыл бұрын
Time for some hids in them lights
@MotoCheez 5 жыл бұрын
Have LED projectors in soon! 👍👍
@martinjohnson2126 5 жыл бұрын
yeah goldw would be cool, but how much? there has to be a cheaper alternative ( I was sort of yanking your chain) florida out......
@MotoCheez 5 жыл бұрын
😄👍👍👍
@Satman82 5 жыл бұрын
Meep meep! Third today.
@MotoCheez 5 жыл бұрын
👍👍👍😁
@jamesbockenstette4332 5 жыл бұрын
Meep!
@MotoCheez 5 жыл бұрын
Meep
@chasedirtbike4155 5 жыл бұрын
Yaay! Mini Truck is getting a 180hp motorcycle engine?
@MotoCheez 5 жыл бұрын
Probably not this one, I want to find another one to build more street
@nickt9968 5 жыл бұрын
Cool video as always, are the maxxis ceros DOT? When I look on their web page its not specified. How they work in mud compared to your prevoius tires?
@MotoCheez 5 жыл бұрын
They are not. At the moment but they're getting their 50mph DOT rating currently from what I heard through the grapevine, they do have all the. Markings but not the actual. Stamp yet. They work well in the mud not quite as good as my last ones but decent
@Motorider2018 5 жыл бұрын
👍👍👍
@MotoCheez 5 жыл бұрын
🔥🔥🔥
@tstanator 5 жыл бұрын
So is that a yes or no on a Hayabusa swap?
@MotoCheez 5 жыл бұрын
I'm looking for a mini with a blown motor to make a street only version 😁
@Odd_Redneck 5 жыл бұрын
@@MotoCheez *flips shit, loses mind*
@MotoCheez 5 жыл бұрын
😁😁
@triviace 5 жыл бұрын
The wife always knows...and it usually ain't good.
@MotoCheez 5 жыл бұрын
😁😄😄👍👍
@techspec3411 4 жыл бұрын
Hey MotoCheez, what are the dimensions of your wheels? I though one of the episodes said 12x7 3+4? Is that correct or are they 4+3? Thanks for the great series!
@MotoCheez 4 жыл бұрын
I have an episode I measured the wheels, 4+3 I believe... It's been a while lol 😁 I believe the link for wheels is in the description of the videos
@chrisdavidson911 5 жыл бұрын
i've always been irritated by jeeps (etc) never having 2wd low! being able to shift low to high while in 1st gear would be nice too heavy trailer? hill start? gotta kill your clutch
@MotoCheez 5 жыл бұрын
They used to have the option years ago, and they even made dual lever Tcase conversions.. I guess they do it to "idiotproof" Tcase syncros!! I can go from low to high if I'm rolling slow. Or just put in the 2 gear rear axle 😁😁😁 which wouldn't be good for a 4x4...
@lonnyschellenberg1622 4 жыл бұрын
I'm trying to attach a picture of my mini truck (beep beep) with tracks. But can't figure out how
@MotoCheez 4 жыл бұрын
Can't on here. You can post it in Instagram and tag #motocheez or post on motocheez Facebook group.
@lonnyschellenberg1622 4 жыл бұрын
Thx
@wiruralguy6190 5 жыл бұрын
Who sings the woah, woah?
@MotoCheez 5 жыл бұрын
Tom Jones. What's new pussycat
@chadcarter9581 5 жыл бұрын
I think a good sport bike motor is a great idea...
@MotoCheez 5 жыл бұрын
Yeah. Really a liquid cooled 750 would be fine!
@justinhayes8992 4 жыл бұрын
You drive them tires a lot on the pavement! I’m always afraid if I go to far they will explode.
@MotoCheez 4 жыл бұрын
UTVs use them on the road out west faster than I can go
@MrStan1221 5 жыл бұрын
Think you may want to shop for a cap and mattress. You maybe living in mini truck. 🤣
@MotoCheez 5 жыл бұрын
Lol, I have a blow-up mattress for my Wrangler that should fit perfectly.
@MrStan1221 5 жыл бұрын
@@MotoCheez might, just saying with comments from the wife, you and mini might be finding a new home. Ha ha
@MotoCheez 5 жыл бұрын
😁
@bigwheelsturning 5 жыл бұрын
Get rid of the "knuckle joints" and put in CV Joint's. Vibrations gone.
@MotoCheez 5 жыл бұрын
True but difficult, the angle should work, I'll find out tomorrow.
@hoagiesherlin7732 5 жыл бұрын
Hows the mpg since you fixed the choke
@MotoCheez 5 жыл бұрын
Way better I just filled up today and I wrote the mileage down but haven't calculated it yet
@user-tv5dt3nm9y 5 жыл бұрын
Ive lost track along the way. Will the 23” Cerros tires rub without the lift?
@MotoCheez 5 жыл бұрын
They'll fit on the hijet without lift
@King_of_the_End 5 жыл бұрын
MotoCheez some guys put a mazda rotory motor in a mini the had to fab some new mounts but that was about it
@MotoCheez 5 жыл бұрын
👍 but it's a rotary.. I've seen my share of Apex seals falling out lol
@shonrich2709 5 жыл бұрын
does the front end for the 4+4 have a vacum or cable for the acuator? 2 to 4+4
@MotoCheez 5 жыл бұрын
Vacuum
@TBUCKETMAN 3 жыл бұрын
I know it’s been a couple of years on these tires but how do you like them on the road, I have a Honda acty H3 I noticed you said those are not DOT rated but have you had any problems this truck won’t be driven like a daily driver.
@MotoCheez 3 жыл бұрын
They're great. Jeffro has them on his tiny tonka now, his old tire didn't last. These holding up very good
@TBUCKETMAN 3 жыл бұрын
@@MotoCheez love the front bumper idea also. Thinking outside the box for sure, what wheels are you running, I like the bead lock look, are they 12 x 7?
@MotoCheez 3 жыл бұрын
Now I'm back to stock aluminum w 24" tires. I think they were 12x6 4+3 offsets. Description was in description
@Antique803 2 жыл бұрын
Did you have to put a lift kit on it to run those tires?
@MotoCheez 2 жыл бұрын
Yes 2" lift
MotoCheez
Рет қаралды 35 М.
MotoCheez
Рет қаралды 795 М.
Sergio Outdoors
Рет қаралды 44 МЛН
MotoCheez
Рет қаралды 38 М.