The Trainer

Рет қаралды 83,929

Күн бұрын

Have trouble dealing with those pesky "U" codes? This episode of The Trainer may take some of the pain out of diagnosing "loss of communications" faults.
#canbus #lossofcommunication #ucode #electrical #autohowto
Show the world you were "Born To Wrench"! Check out our official MA T-shirts:
passthease.motoragetraining.c...
@@@ TRAINING FOR PROFESSIONAL TECHNICIANS @@@
connect.motoragetraining.com
@@@ FOLLOW US ON @@@
Facebook: / motoragemagazine
Twitter: / motor_age
Instagram: / motor_age
@@@ VISIT OUR WEBSITE @@@
www.motorage.com
@@@ SUBSCRIBE TO THE DIGITAL EDITION OF MOTOR AGE @@@
bit.ly/MotorAge_freesub_YT
@@@@@@@@@@@@@@@@@
Due to factors beyond the control of Motor Age, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Motor Age magazine (Endeavor Business Media) assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Motor Age recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Motor Age, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Motor Age magazine or its corporate parent, Endeavor Business Media.

Пікірлер: 66

@thinkingsmarter3506 Жыл бұрын

I want to thank you. I have a 2010 explorer with RSC alarm going off and started on resolving it months ago. I purchased the vehicle with the issue. I thought based on KZfaq it wa a faulty ABS module. My scan tool was not high tech enough to run most of the test you referenced but you point out in the end go back to the basics, check the fuses. Well low and behold it had a fuse missing.. replaced fuse and so far problem is resolved. 👍 Got to run the drive the full cycle but either way this is a huge step forward. Great video, sincerely thank you.

@earljoseph1547 2 ай бұрын

😊

@samr.m.7709 3 жыл бұрын

Great video Pete thank you!

@garygarafano8341 3 жыл бұрын

Great info as always!

@Lambros_Stefaneas 3 жыл бұрын

Nice video Pete. Thanks.

@billyyoder8171 3 жыл бұрын

Thank you Pete. Good job. Have a blessed and safe week to you and your family.

@MotorAgeMagazine 3 жыл бұрын

Same to you

@cheapers1952 9 ай бұрын

🤔 I learned a valuable lesson a long time ago with fuses pull them out and inspect a d use an ohm meter on the legs in the last 50 plus have had 2 fuses that had voltage across at the top and when checked at the legs I had an open circuit 🤔

@stewartboucaud9919 3 жыл бұрын

Great video, Pete.

@99andrianmonk 3 жыл бұрын

Excellent video. Your style of explaining what's going on and what or why it is happening is outstanding.

@user-ff8sb5id2t Ай бұрын

I wish life is that easy with CAN bus intermittent issues.

@wyattoneable 3 жыл бұрын

Excellent presentation Pete.

@MotorAgeMagazine 3 жыл бұрын

Glad you liked it!

@luiscalleja1471 3 жыл бұрын

Good tips thanks

@moulayediag3873 2 жыл бұрын

a lot of information thanks a lot

@CortezAutoServiceMobile 3 жыл бұрын

Love this channel thank you

@MotorAgeMagazine 3 жыл бұрын

Thank you too!

@edlevated 2 жыл бұрын

New subscriber here, just wanted to thank you for sharing your knowledge with this community. Happy holidays!!!

@MotorAgeMagazine 2 жыл бұрын

Welcome to the channel!

@HotRod-wv4vm 3 жыл бұрын

Thanks

@James-fs4rn 3 жыл бұрын

👍 good stuff

@Mewanrahnam575 2 жыл бұрын

Solid knowledge you are imparting.Thankyou.

@thehungrymechanic3649 Жыл бұрын

Plumbers have leaky pipes they say.. Great video! Great info! But I gotta say as a field tech that sure is a lot of steps and hardware to find a blown fuse 😅. I just bought an Autel ms906ts pro I love it so far. But It don't have that topology feature unfortunately. I'm currently tracking down an intermittent can bus issue on my own personal truck. Stopped by this video to brush up on some diagnosis steps to track it down. I have a good feeling I'll find water intrusion due to a sunroof leak. Just need time away from fixing customer vehicles so I can fix my own 😅

@topadrenalina679 Жыл бұрын

thanks for the video master

@MotorAgeMagazine Жыл бұрын

You're welcome

@Joe_1971 3 жыл бұрын

I had a similar problem with my f150..the ac would not work and the guage cluster was acting wacky with lights turning on and off and the needles sweeping. Ended up being a shorted wire running along the wire chase on the drivers side.

@jgeorges3061 3 жыл бұрын

Pett, AWESOME and very good information you been teaching always enjoyable thanks for sharing cheeeeeers

@taycoop4432 2 жыл бұрын

L no I’m

@taycoop4432 2 жыл бұрын

lol Ollo

@taycoop4432 2 жыл бұрын

lol I’ lol l I’m

@taycoop4432 2 жыл бұрын

No I

@rexjames0015 4 ай бұрын

Looks more like Motor for the Aged rather than Motor Age

@sandymejia1120 3 жыл бұрын

Nice video i check my between 6 and 14 and only have 120 ohm any suggestions i unplug all modules and still 120

@HouseCallAutoRepair 3 жыл бұрын

If a fuse blows, there is ALWAYS a reason. Find that reason and accomplish two things... Prevent a come-back and become your customer's hero!

@brendaangela870 8 ай бұрын

More blessings 🎉

@northernpatriot9078 3 жыл бұрын

Pete i like seeing you in enhanced mode good video thank you !!

@sollykhan2385 2 жыл бұрын

Thanks for another AWESOME video, Pete, ohh Btw did you get any further why that fuse had blown in the first place ? just curious 🤔, BLESS 😇

@MotorAgeMagazine 2 жыл бұрын

It appears it was a vibration failure. No problems since!

@sollykhan2385 2 жыл бұрын

@@MotorAgeMagazine ohhh that's great, all sorted !! well done, as ever, Pete. hope you had a nice break, take care, BLESS 😇🙂👍

@bbmd2200 3 жыл бұрын

Hello, Pete. As far as I know, the module transceiver is responsible for the voltage differential in the CAN NETWORK. If you have a bad transceiver, how would you find the module with the bad transceiver? Would you have a U code?

@MotorAgeMagazine 3 жыл бұрын

The best way to find the bad module is to monitor the CAN signals on a scope while you unplug the modules on that network one at a time. When you see the pattern return to normal, that's the module that has failed. Start with the modules that are easiest to get to...

@MechanicTechnicianRepair 3 жыл бұрын

Experience diagnosis. Tec. Nice video saludes noel matute

@jamesbarratt593 Жыл бұрын

Seems modules communicating fine and data passing along can h and can l but no comms with any autel. What reasons could cause this

@mattharvey8712 Жыл бұрын

Bravo...........u look old school.......computer..........how old is the can....bus.....system........?.........cheers

@alwayslearning6355 2 жыл бұрын

Hello, Pete. The terminating resistors complete the CANBUS circuit, I would say. How do you get voltage in the CAN lines if you disconnect a module containing a resistor? Thank you.

@MotorAgeMagazine 2 жыл бұрын

I went to an expert and asked. My friend Bernie Thompson at Automotive Test Solutions (kzfaq.info) says, "In CAN each module or Node is a multi-master. That means that each module can supply the CAN voltage on the Can com wires".

@alwayslearning6355 2 жыл бұрын

@@MotorAgeMagazine Bernie may be talking about the Can transceiver.

@VictorHomeku 9 ай бұрын

Please I want to learn more about schematic

@breonbrazier2996 Жыл бұрын

What if the moduals communicate with the scan tool,but they don't communicate with each other.they say lost com with "blank" modual. Different moduals lost com with others but all com with the scan tool.

@MotorAgeMagazine Жыл бұрын

Could be an intermittent problem. Have you tried clearing the codes to see which ones remain active? Typically, the one module the others are pointing their fingers at is a good bet to be the one with the issue. But make sure it has what it needs before condemning it.

@florenciomartinez3695 7 ай бұрын

what blew the fuse?

@dasouth1978 3 жыл бұрын

that piercing was extreme 13:48

@elgroso806 2 жыл бұрын

Hello. I have a problem with a can bus. No u codes. I can communicate with all the modules but i can't get live data. As soon as I try read the live data on any module, the scanner takes me out and display a message of no communication. I have literally done everything. I don't really know what else I can do to diagnose the can bus system.

@MotorAgeMagazine 2 жыл бұрын

What kind of vehicle and what brand scan tool are you using?

@elgroso806 2 жыл бұрын

@@MotorAgeMagazine The vehicle is a 2011 Gmc Savanna, 4.3 l v6 vortec. The scanner is an Autel 909.

@MotorAgeMagazine 2 жыл бұрын

@@elgroso806 So you are able to perform a full system scan? Do you have the topology mode on your tool? If so, take a screen shot of the completed scan and send it to pmeier@endeavorb2b.com

@elgroso806 2 жыл бұрын

@@MotorAgeMagazine Yes, I'm able to perform a full scan. Also, I have an Autel ms909 and I'm able to see the topology. I'll get the photos and I'll send them to you. Thanks for answering.

@gloriaellis1414 6 ай бұрын

Need to know what this numbers meemon a 2002 S. 10 2.2 the numbers are DLC 150914 3:02

@coldjello8436 10 ай бұрын

Algorithm boost.

@Barryd57 Жыл бұрын

Blasting music does not add to the video.

@Titans2138 Жыл бұрын

that wasn't very satisfying. fuses are the first thing i check and it's never the fuse. I have a u1900, brake light, abs light on

@MotorAgeMagazine Жыл бұрын

Are you able to do a full system scan to see what modules are, or are not, communicating on the bus? Do you have access to a scope? This newer video may be helpful: kzfaq.info/get/bejne/a82JgbtezcXWe4U.html

@buffmaloney 2 жыл бұрын

So basically those of us that do not have the scan tool are out of luck.

@MotorAgeMagazine 2 жыл бұрын

Any quality aftermarket scan tool will help you diagnose communications faults, especially when paired with a scope. Basic code readers here are useless.

@buffmaloney 2 жыл бұрын

@@MotorAgeMagazine all I have is a Carista with the full version app.

@jessejameson154 7 ай бұрын

No , basically all just lift the hood and check the fuses. No need to have thousands of dollars with of equipmen. I learned how to check fuses when I was 7 years old. But these automotive channels need to produce videos with dramatic content. I can't believe all these comments saying good job .....does anyone not check fuses anymore 🙈🙈🙈🙈🙈