Motorized Standing Desk

Motorized Standing Desk - Kraftmade

Рет қаралды 35,122

Күн бұрын

Follow me on Instagram @krafmade_nd.
How to wire a linear actuator: • Linear Actuators 101 -...
In this video I show you how to build a wall mounted sit/stand desk. The desk is raised by linear actuators and slides on linear bearings.

Пікірлер: 67

@landsman737 10 ай бұрын

This is the closest thing I've had in my head for years. I hate tables with legs. I now have a desk fixed to the wall in my office and plan to upgrade to a standing desk.

@PolntBlank 4 жыл бұрын

This makes me miss my fathers garage with almost every tool. Well done my friend.Very rewarding to make the entire thing instead of ordering a monitor stand!

@Kraftmade 4 жыл бұрын

I really appreciate it! Thanks SomeHooligan!

@unitwoodworking5403 4 жыл бұрын

wow this is the best because it fits one's height. With this idea I'll try to make TV standing desk in my bedroom.

@Kraftmade 4 жыл бұрын

Awesome! Let me know how it turns out!

@johnpedersen2480 4 жыл бұрын

This is the video the world needs now! Work from home in comfort! I also like that you have donated all your dust masks to the hospital - they need them more than you!

@Kraftmade 4 жыл бұрын

Hahaha! Perfect timing is right

4 жыл бұрын

Hello my friend I watched your motorized table project with admiration. That's a good idea. Convenient and robust. You did a good job. Congratulations. Thank you for sharing. Great greetings. I wish you healthy and happy days....

@Kraftmade 4 жыл бұрын

Thanks for the love!

4 жыл бұрын

@@Kraftmade healthy and happy days. You're welcome.

@iHustleLXXXI Жыл бұрын

Helleva good job. I have no clue how someone can build that desk out of nothing. Good for you!

@Kraftmade Жыл бұрын

I appreciate it! A lot of research!

@researchandbuild1751 2 жыл бұрын

I am glad to see a different design. I was thinking odpf doing the same, but using en electric winch to raise and lower with a cable, mich faster and probably quieter too

@Kraftmade 2 жыл бұрын

That would be a great way to do that! If you do, let me know how it turns out.

@K.Huynh. 5 ай бұрын

So cool! I love your table!

@YESSLEEP42 4 жыл бұрын

Love the motorized track built in!! Good build!

@Kraftmade 4 жыл бұрын

Thank you!

@santoshlingala6267 3 жыл бұрын

@Kraftmade This is one of the best designs that I came across so far on KZfaq. I would like to build a similar one. May I request you to share the measurements please.

@Kraftmade 3 жыл бұрын

Unfortunately I don’t have plans but would be happy to answer any questions you have

@santoshlingala6267 3 жыл бұрын

@@Kraftmade Sure, Thank you very much and that would be a great help. I do have few questions: Wanted to know the type of Linear guide rail you have chosen and its size if it's fine with you. You have also selected strong solid steel for the rectangle tube, What is the thickness of the rectangle tube? Rest of the things / measurements I will try to manage and I would get back to you if I have any question. Hope that's fine with you. However thank you very much for the response.

@Kraftmade 3 жыл бұрын

@@santoshlingala6267 It's a linear rail bearing guide 1000mm. It's 1/8" 1"x3" rectangle tubing. You are welcome!

@santoshlingala6267 3 жыл бұрын

@@Kraftmade Excellent! Thank you very much for sharing the this details.

@Blaquegold 3 жыл бұрын

Very original great work!

@Kraftmade 3 жыл бұрын

I really appreciate it!

@manuelavendano3891 3 жыл бұрын

What an intuitive and practical design for a standing desk! By having the frame attached to the wall, the desk doesn't wobble at all, am I right? Have a good one!

@Kraftmade 3 жыл бұрын

Thank you, I appreciate it! Yup, it is completely rock solid. As I am sitting at it right now, I cannot shake it at all

@dodger1x 4 жыл бұрын

You cold make this counter balanced or neumatic instead ;) it would move far more quict, quicker and smoother :)

@swilhelm3180 Жыл бұрын

But are 2 or 4 neumatics easy to sync together? Counterbalancing is an interesting idea. How would you anchor it at a set height quickly and solidly? Some sort of clamp system?

@solomonmokua4643 Жыл бұрын

Nicely done.

@cravatenoire3269 15 күн бұрын

want this but without attaching to wall Shiftable/Movable. And i dont mean the conventional sit stand desk.

@temalgun 4 жыл бұрын

Great job man, exactly what I was looking for. I'm a little worried about how the linear guides would hold since I don't know how to calculate the load. Have you done the math? How are they holding after 5 months?

@Kraftmade 4 жыл бұрын

It has held up very well. Even with working from home it is still rock solid! If I remember correctly each of this actuations holds like 350 pounds so I way over killed it. Rather overkill than under kill

@temalgun 4 жыл бұрын

@@Kraftmade thx... but I was talking about the linear guide(fixed to the wall) and pillow block, not the linear actuator.

@Kraftmade 4 жыл бұрын

Oh, the linear guides are still in great shape. Everything works as good today as it did on day one

@PAUS3D_01 4 жыл бұрын

Hey really considering making a sit stand desk cause there's nothing else I can do right now but didn't want to buy the linear actuator or start getting deep into the it until I was certain about this idea I've seen many which use a singular actuator at the centre of the desk but would it be possible on a shallower desk to have the actuator at the back and still have it lift everything level?

@malikbezhanakbari935 3 жыл бұрын

Damn 👌 never seen like it before 👏

@Kraftmade 3 жыл бұрын

Glad you liked it!

@aidanoconnor4172 3 жыл бұрын

😅 "a grinder and some paint, will make a welder what he aint" very good.

@stylejuya 3 жыл бұрын

When you use two linear actuators and the power is on, the actuators move up/down evenly ? I thought, there might be some sort of calibration to make those actuators works evenly.

@Kraftmade 3 жыл бұрын

Yes, the motors should move at the same speed however if they don't you could put a speed controller on the motor. I got all of my information from this video. kzfaq.info/get/bejne/ntaKn5poyL-mqKM.html

@TheNaiqqi 2 ай бұрын

where do you got the lifting motor piece?

@SansP3ur 2 жыл бұрын

Nicely done dude. Not sure where I missed it but did you make the linear rails with the tube [@3:00 @16:32] or purchase them?

@joshuavaughn6921 Жыл бұрын

Anyone know what kind of welder he's using? I'd love to get started doing projects like these but need to learn basics of welding and what ever he's using looks pretty straightforward (to my untrained eye).

@Kraftmade Жыл бұрын

It's a MIG welder and it is probably the easiest welder to learn on.

@ricardodiaz8719 4 жыл бұрын

do you have links to the actuators and powersource you used?

@manuelavendano3891 3 жыл бұрын

That´ll be usefull

@jings1926 2 жыл бұрын

Did you put any rubber or anything around the cord the holes?

@Kraftmade 2 жыл бұрын

I rounded over the holes with a round over but to keep the cords from fraying.

@jings1926 2 жыл бұрын

Did you say three magnets in the hodor?

@Kraftmade 2 жыл бұрын

Yup! The magnets hold the door shut.

@saikatshahriar8355 3 жыл бұрын

Great work.. I need to know from where to get this liner guide rail.

@Kraftmade 3 жыл бұрын

I purchased everything on Amazon. Ebay carries a lot of it as well

@saikatshahriar8355 3 жыл бұрын

Any link please?

@Kraftmade 3 жыл бұрын

@@saikatshahriar8355 www.amazon.com/s?k=linear+rail&ref=nb_sb_noss_2

@KO-sk1bk 4 жыл бұрын

Do you build the track for sale.

@purresoul480 7 ай бұрын

WELL...WELL...EXTRA.

@andresquintero3814 3 жыл бұрын

Can you tell me what materials you used please

@Kraftmade 3 жыл бұрын

Thats a pretty long list, is there anything specific you are looking for?

@andresquintero3814 3 жыл бұрын

@@Kraftmade What is the name of the tube that slides the table?

@Kraftmade 3 жыл бұрын

@@andresquintero3814 Linear actuator and linear rail

@andresquintero3814 3 жыл бұрын

@@Kraftmade thank you very much

@Mark-pg7jg 3 жыл бұрын

overkill

@ichthys7883 3 жыл бұрын

Mucho ruido hace..

@marlukcz 3 жыл бұрын

lol, I can raise and lower my manual crank desk in about 20 to 25 seconds. I bought the frame for about 150$ ... sorry, but you wasted a lot of effort and pain into this

@nabber8584 3 жыл бұрын

What frame did you buy?

@ivantang5254 2 жыл бұрын

In your opinion perhaps. The knowledge earned and ideas generated is never wasted effort for a maker since innovating is part of the mindset. So good on you for being able to find the solution that suits your needs just like how building this suited his.