"still free on youtube" RIP

Dulcich is HILARIOUS with the faces he makes when he’s bangin’ through the gears 😂🤣😂😂😂🤣🤣😂🤣

"When all else fails, just decide it's fine." DF is my new hero

"...still free on youtube." I'm very sad.

I got Motor trend on demand and I don't care about paying that much, because of the awesome content. Its worth the money completely. Great job on that car guys!

0:05 Roadkill isn’t free any more. We all miss the old Roadkill

This is what drug dealers do. The first one is always free.

Best thing was the cable tie spark plug lead separator!

tapered ring compressor, the single most pleasing tool to use on the planet ever, it just so satisfying using one....

Gotta love Steve's driving stance, head tilt to the side, arm lean on the window, banging gears like a badass!!!

You should make whole episode of Steve just driving and shifting gears like a champ. I would watch it!

Hey Dave Freiburger, I have a tip for all you guys. I have long lost count on how many coolant blasts I've watched you guys do.. ALL OF YOU!!! There is a simple solution to not getting coolant all over everywhere and having to spend the time to clean it up and work in it... Are you listening????? Ok, take a 2 foot long piece of 3/8ths tubing, (copper works very well), and a piece of rubber hose that you can squeeze onto one end of the tubing. Bend about a 90* hook in the end of the tubing that has the hose on it. Grab a few containers to catch the coolant. Slip the raw end of the tubing into the radiator and sink it to the bottom of the rad tank. Suck on the other end of the hose to start the siphon. Drop the end of the rubber hose into your container and drink a beer!!!!! This is a very simple tool to make, so you can make one for ALL the guys who we watch CONSTANTLY douching shop floors, parking lots and the occasional friends driveway... lol.. AND you can carry one with you each time you go on a ROADKILL adventure!!!! This doesn't do you much good on top tanks, but for all those General Masterbaters cars and truck you guys do, it will work just fine.... Love the shows!!! Ps. When are we ever going to see some of Dulcich's cars???

This is awesome. You started with a garbage motor that didn't run and ended with a garbage motor that ran for a few minutes. I have to commend you, that's better than most people that rebuild Fords.

Fuck Motor Trend on demand.

This video made me feel so much better about my own project car 😂 between the wrong flywheel and attempt at pull starting is part of what makes me really enjoy this show! Really just everyday people.

Dulcich looks so serious when driving haha

Dulcich looks like a badass banging gears haha

3 words: Dulcich's driving face.

I just love how Dulsich was bang-shifting that thing like a religious ritual

i have been waiting for this my whole life, this is the way us real folks do it thank you so much for a show normal everyday people can relate too! this is what working on old cars is about! you have to have a passion and a good friend who shares your same interest! i wish i could do what you do every day!

19:49 haha steves face shifting through them gears✊

this is awesome idea. you give people to see what this series is like before decide if they buy on demand thing. thumbs up for you guys

steve's expressions are hilarious and the way he's driving the car in the end is just funny as ever.

Love the non-impact socket on the impact gun, wouldn't expect anything else from Road Kill.

20:16 meanest upshift of all time lmao.

I would have waited the extra day for the bearing . Everything else was fine for backyard butchery but the leaving the bearing was in excusable

My son loves the zip tie plug wire loom. He's used it more than once and the guys at the Firestone store he works at have used it on their personal rides. He like myself have picked many tricks from Roadkill and refreshed our memory on some we had forgotten. This is why this show is so popular. You don't have to have a ton of money to enjoy the hobby. In my son's case it's a hobby and occupation. All he ever wanted to be was an auto mechanic. When he went to the local 2 yr. college the lady who assessed his test scores for the course(s) he had chosen told him with his math grades he could go into engineering. He told thanks just the same but his life revolved around turning wrenches. Damn good kid even though I guess I'm a little biased.

Yas! My favourite! The 351 Cleveland, same engine that powered the MAD MAX Interceptor and Falcon GTHO's!

Dulcich could drive a shopping trolley and still look badass doing it.

Hotrod Garage is great for beginners which is why I was always kinda bored but this! This! Is great! Its for the people who already know the right way to do it, but secretly wish they could just slap it together and not care :)

Whoa...that zip-tie wire separator hack is badass!! Thanks so much Frieberger 👍

When he was banging gears you cant tell me he didn’t look at least slightly like a slightly older version of Nicolas Cage in gone in 60 seconds

Love to see I’m not the only one that’s had these problems in the past great job guys very fun to watch but sometimes things do go perfect if you do enough of them

Love this episode and the blunder of the clutch. It seems I am not the only one who makes these kinds of mistakes.

This channel is under rated. I aint even into cars but love to get to know the technicalities of cars/engines from a beginners prospective and this channel just oozes knowledge from experience all of which i have this channel to thank.

I'm so greatful for both of you and MT team to bring to us your skills and good humor! Thank you Freiburger and Dulcich! I love you guys!

Dulcich's face while hes shifting is hilarious!!!!!!

Steve Dulcich has the coolest driving pose lol. Looks like he ready to tear shit up!

Steve is perfect, calm and dry humor, but knows his stuff without making sure you know it

brings back good old memories. that is what its like when you have to do a major fix over a weekend. I've done it many times. keep it up guys. steve

Should have just waited for the new cam bearing.

HAHAHA Dulcich looks just like i do when I'm trying bang gears

Steve is great. My favorite part of the show, besides the awesome format of showing actual work done by you guys.

if you've never seen the inside of an engine, this is actually quite educational.

Much respect for being up front and not getting money hungry guys! Good luck to all your ventures anbd future videos. As long as you guys keep RK free and YT avalible Im good :D

thanks for not showing the boring stuff about everything we wanted to learn u didnt show just like every other show

Just when I thought RoadKill was the greatest show on the KZfaqs.... you go and do this! Great job as always!

13:45 one of the funniest exchanges I’ve heard on roadkill. MTOD subscriber by the way. 👍🏼 love the content, totally worth it.

I enjoy Roadkill, but this "trend" of paying for limited content is not really my thing. You would have been better off doing an episode with product placement here on KZfaq, you're using those parts anyway...

so... did they change the bad cam bearing?

The way dulchich drives that bad boy you can tell it shoots him back to his cool days arm out the window to the look on his face priceless ..get it my dude only car you worked on can bring on that amount of coolness.

I LOVE that car I had one exactly like that one in the mid 70's except it had a 289 4 speed ,it originally had an automatic and was changed to the 4 speed without changing the gearing so it was a dog getting off the starting line but I wouldn't shift into 3 until the finish line of 1/4 mile. Of course mine still had good paint and no dents or rust. I traded in a 65 Mustang convertible with a 289 Automatic that I literally wore out street racing, I had to drive it 14 miles to trade it off and I had to stop and put oil in it. It was sold to the paper guy who drove it for a couple of years, it looked like a mosquito fogger going down the road. I would love to have both of those cars back today, I am 59 and when I had those cars I was 15-17. Thanks so much for this video I loved it. It reminded me of the way I had to keep those two cars running. I changed the tranny in the Mustang 6-7 times by myself sitting in front of our house, I actually got really good at it, jacked up the car climbed underneath unhooked and unbolted every thing and drop it on my chest and back out from under the car, Those were the days, I can't even change oil in my vehicles now due to arthritis I am guessing too much fun in the good old days.

Dulcich left the tag hanging under the arm of that new Dickies jacket 😉

I always thought the cougar looked better than the mustang Im not alone right?

One of my favorites. Steve's test drive at the end is epic.

I watched some of this and I liked it a lot. I'll pick it up again and try to determine why you left that cam bearing like that. (the three day deadline deal?) You guys must have known better than to expect to fire that up for the first time by pushing it. The honesty of showing stupid mistakes is especially refreshing. Keep up the good work!

"Are you volunteering me right now?" Everytime I ask that, I get the response, "No, You're being volun-told."

11:00 Never touch a cougar without wearing protection.

Never seen Dulcich so happy as when he's hard shifting burnouts!

man that Steve Dulcich really knows how to power shift like a boss

as of now. I'm 12 minutes into this video. Iv been watching it for 2 hours. the beauty of straight talks "unlimited" data.

I disagree with David. The Cougar is a beautiful machine!!

Thanks for rebuilding a Cleveland. My D1AE is coming out of the Pantera soon (I'm not going to rebuild it myself) but I will be able to take it apart and make a big mess!

I laughed so hard through this episode!! Their back and forth banter and just all the fails like the flywheel diameter and then trying to start it by towing and the fire!! OMG I couldn't breathe I was laughing so hard! EPIC!!!

We called that rebuild a Dirt Motor rebuild. Did dozens of them with very little problems.

You created something beautiful, then started doing 30 min ads for Dodge, and now you're slowing moving content behind a paywall. And now every video feels like you're using KZfaq as a sales vehicle to drive people to your website. Best of luck fellas.

As the owner of a sometimes-running '68, I'm so happy to see a Cougar made it to Motor Trend. I always assumed you guys were not FoMoCo guys. (I know the Stubby in Episode 44 was a Ford, but still)

Loved Dulcich on Roadkill.... great edition to add the the amazing cast of people.

I found a complete butter knife inside a tire once.

I dont want on demand thingy, doesnt youtube ads pay enough???

This feels so much like some of the junk me and my buddies used to get into! ...and some of the junk I still have in the driveway. Ha. Great show! I love that you're not in some spotless, million dollar garage stocked with half a million dollars worth of tools.

Holy crap! I just bought a '67 Cougar this spring with a rebuilt 351C in it! My paint job is a tiny bit nicer though. :) Getting the front end rebuilt, it was completely worn out.

Steve Dulcich drives like a demon out of hell. its a compliment

Im happy that Roadkill still will be free :) Thank you!

Great job fellas bring back memories cheers thank you 🙏.

Dulcich looked SO appropriate ripping those gears! 😂

"Roadkill is still free on KZfaq" Mmmm.

How surprised were you guys about the Cleveland power? Curious what Chevy/Mopar guys first experience driving one was.

great show!! again.! i just watched this video a second time and it was even better than the first time!! Dano

i watch mostly for the comedic value. That Dulcich and Freiburger comedy is priceless.

I love Steve, he goes full throttle and has an epic given her the berries face! :)

thanks for building a Cleveland! Looks more like 1970 2 bolt main quench motor than 72 CJ.

I just signed up and paid for this on demand. You guys better make alot of these episodes!

I dig how Dulcich holds his head all off to the side (@19:51) while rallying the piss of this poor thing...like it's some sort of therapy. Keep it up dude!

Hey, just like when I was in HS. Every project must be done by Monday morning.

Dulcich is the bomb. I'm going to go ahead and subscribe, you guys make fantastic content.

I really like how they actually show cottage of disassembling the long block,and getting into the heads,shows usually cut past the messy stuff in between

Dude Motor Trend on Demand is well worth it, glad I subscribed. Plus like to help you guys out since you come out with awesome content, its the least I can do.

Cougar question #3 obviously the engine has closed chamber heads, but a few things have me scratching my head.#1: 2 bolt main caps? Engine is a 72? Crankshaft looks to be a cast crank by the parting line. obviously the cast iron intake had a carb adapter plate on it to run the Holley Carb. Since the cylinder walls were not wore out beyond just a single ball hone, any over bore done previously? After going back a month later for fixes, What are the specifications on the camshaft used? Any spring upgrades done in the past? Are those new pistons? Stock " old fashioned ring package used? Any info on the carb? jets etc.Just rebuilt a 9.5 deck "Windsor" in a 1969 Cougar. The Ford 335 series engines can be very in a lot of ways. Roadkill Garage looks like it will be a success, so I guess I'm going to subscribe to Motor Trend on Demand. Since it is Roadkill Garage a little more information would be greatly appreciated.

I guess I'd actually subscribe to MOD, but, y'know, outside the US...

..reaIly enjoyed this! Reminds me o way back when I was struggling to get my ford cortina to run consistently. Cost me a few quid but taught me a lot about cars!

I like it! You did exactly what the average Joe would do in his garage, exactly what we want to see.

20:16 best gear change face ever😂

it took a month.. so why didnt you guys fix the cam bearing while you were busy fixing things

OMG! This reminds me of the way we were in High school doing home rebuilds on a micro budget. LOL And of course needing it running by Monday.

The cougar is not ugly!! I love the look!

Dulcich drives like a G

If you say David Freiburger's name 3 times at midnight, he'll appear and set your initial timing 180 degrees out.

A work of art, beautiful work, greetings from Brazil

Subscribed to On Demand, looks seriously epic!