Hunting Blind made from IBC Totes - Super Cheap! This Little Shooting Shack even has Indoor Plumbing

Рет қаралды 70,471

3 жыл бұрын

I made this awesome little hunting blind a few years ago out of a couple IBC totes. Items used are in the description below. Check out www.mountainbuck.com for more content.
Mofeez Outdoor 4x4 Compound Angle Brackets for Deer Stand Hunting Blinds Shooting Shack (Set of 4): amzn.to/2SJO9rH
Rust-Oleum 269038-6 PK Specialty Camo Spray Pack, 12-Ounce, 6-Pack: amzn.to/2GEsvCZ
THERMWELL PRODUCTS Available Frost King WB Marvin AWS1845 Adjustable Window Screen, 18in High x Fits 25-45in Wide: amzn.to/36Q1rLz
BLACK+DECKER Jig Saw, Smart Select, 5.0-Amp (BDEJS600C): amzn.to/2Icbb8w
👕 🧢 Get some killer Mountain Buck Gear! mountainbuck.myspreadshop.com...
#mountainbuck #hunting #hunt #mountain #buck

Пікірлер: 70

@dhanoa53 10 ай бұрын

The blind is easy to put up and take down. kzfaq.infoUgkxvlQxmcZQzSQSYbJsEgAGvG2DaduKTV99 As a female hunter, the ease of placing and setting up the blind is a plus. It’s more of a wind barrier than a warm quilted blind. Which makes it a lot lighter than our quilted blind. I enjoyed the larger windows/openings. Made for a successful season. It has held up well for the first season and the stitching looks good.

@mountainbuck 10 ай бұрын

Hey thanks for watching! It’s definitely only big enough for one person (and not a big person)

@bryanmcpherson3576 3 ай бұрын

Had mine for over 5 years and still going strong

@mountainbuck 3 ай бұрын

That’s awesome! Thanks for the feedback👍🏻👍🏻👍🏻

@kevinburgess6112 3 жыл бұрын

video quality is more the sufficient, thanks for sharing your great idea

@mountainbuck 3 жыл бұрын

Hey Kevin, thanks for the positive feedback! Much appreciated!

@dana44169 Жыл бұрын

What a great job,it just shows what you can do with a little plan,preparation,and a purpose in mind.Really enjoy watching your videos,looking forward to the next one

@mountainbuck Жыл бұрын

Thanks so much Southern Preacher! I appreciate the support 👍🏻

@davidthompson1529 2 жыл бұрын

I did the exact same thing w the plumbing on a hard side blind last yr. That is a great shack! Well done. Good luck this season.

@mountainbuck 2 жыл бұрын

Hey David, thanks for the positive feedback! The plumbing really comes in handy haha. I recently made a new blind out of a 1,000 gallon water tank and I’m loving it. Best of luck to you as well this season 👍🏻

@OffTheGridAdventures 3 жыл бұрын

That a great idea! Thanks for sharing!

@mountainbuck 3 жыл бұрын

Hey Off the Grid Adventures! Thanks for checking out my channel!

@awbernardy 3 жыл бұрын

That is a AWSOME set up you made with a little $$$$ I just might have to make one of these too

@mountainbuck 3 жыл бұрын

Hey Adam, thanks so much and thanks for checking out my channel!!!

@reaping_rager5231 2 жыл бұрын

this is by far the best set up for little cost good job man. youve given me a few good ideas for my next stand, keep up the great work and happy hunting\

@mountainbuck 2 жыл бұрын

Hey thanks so much, Reaping_Rager. I appreciate the positive feedback! Here are a couple more of my blind builds if you are interested kzfaq.info/get/bejne/nbCPZ7ajla3IoHU.html kzfaq.info/get/bejne/p8t7hJOF0dvRgok.html

@papawed489 3 жыл бұрын

Nice setup. May have to still your pool noodle idea.👍👍👊

@mountainbuck 3 жыл бұрын

Thanks for checking out my channel papaw Ed! Steal away! 😬

@billy19461 3 жыл бұрын

Love it!

@mountainbuck 3 жыл бұрын

Thanks billy19461! Appreciate the feedback!👍🏻

@mountainbuck 3 жыл бұрын

- Check out the IBC Tote Hunting Blind full build video: kzfaq.info/get/bejne/p8t7hJOF0dvRgok.html - Also be sure to watch the Water Tank Hunting Blind build here: kzfaq.info/get/bejne/nbCPZ7ajla3IoHU.html

@btwarner2124 3 жыл бұрын

Very cool man.

@mountainbuck 3 жыл бұрын

Thanks BT! Appreciate the feedback!

@twinsoutdoors2247 3 жыл бұрын

Awesome!

@mountainbuck 3 жыл бұрын

Thanks guys!

@rubenrenegado3355 2 жыл бұрын

Nice job man 👍

@mountainbuck 2 жыл бұрын

Thanks, Ruben! Much appreciated 👍🏻

@raymondhoagland4976 3 жыл бұрын

Love it, Great job !!!

@mountainbuck 3 жыл бұрын

Hey thanks Raymond! I appreciate it!!

@maxfriedenberger8043 2 жыл бұрын

another awesome idea

@mountainbuck 2 жыл бұрын

Thanks again!

@campbellmarty36 2 жыл бұрын

Well .... post Covid.... these little jewels in my area are now fetching in $100 a PIECE range!☝️🙄... that $200 will go a LONG way on new supplies!!!. Maybe I’ll get luck and find some cheaper!!!. Great idea indeed ☝️👍👍!!

@mountainbuck 2 жыл бұрын

Hey Campbell73, thanks for checking out my channel! Holy smokes! At those prices you’re better off building one of these: kzfaq.info/get/bejne/nbCPZ7ajla3IoHU.html - a much easier build and much more room. Best of luck this season 👍🏻

@hunter69707 3 жыл бұрын

Nice!

@mountainbuck 3 жыл бұрын

Thanks Clark! Also, thanks for checking out my channel!

@isaacwalton7283 3 жыл бұрын

I got a couple stands like this. We stacked 3 of the metal outside of them and on the top one I used the plastic piece for the blind

@mountainbuck 3 жыл бұрын

Nice! That’s interesting!

@foryourentertainment1109 9 ай бұрын

Great job.

@mountainbuck 9 ай бұрын

Thanks so much! I appreciate it 💪🏻

@foryourentertainment1109 9 ай бұрын

@@mountainbuck I have been thinking about doing this. Lucky me, I found your video. Once again, awesome job.

@mountainbuck 9 ай бұрын

I have a more detailed version in case you are interested. Thanks again👍🏻

@edwfd356 3 жыл бұрын

I’m gonna get a porta John thanks for the idea

@mountainbuck 3 жыл бұрын

Hey Eddie, thanks for checking out the channel! I thought of that too! Great idea!!! 👍🏻

@shandonmeadows8620 3 жыл бұрын

Might just be the best idea yet! Being able to sit in my office, and take out a deer at the same time?! Count me in!

@tonydize3944 3 жыл бұрын

Nice i like the urinating thing i would use something like that

@mountainbuck 3 жыл бұрын

Hey thanks Tony! I appreciate it!

@TheSkinking 3 жыл бұрын

I made one 5 years ago. i used it every year. but up here in Saskatchewan it gets really cold, so you have to run a heater constantly in there, and just a tiny window to hold your heat. Then i found it sweated and dripped on you, needed to put insulation on top and box it in. The worst though is that it is cramped and hard to spend 5-6 hours in

@mountainbuck 3 жыл бұрын

Hey TheSkinKing, thanks for checking out my channel! Yeah, these things definitely don't offer a lot of room! That's interesting that you've insulated it further (I put some spray insulation in any cracks and connections). I bet it helps in that super cold up north!!!

@flushot6513 5 ай бұрын

Lol awesome

@mountainbuck 5 ай бұрын

Haha thanks man👍🏻

@A.C.71 2 жыл бұрын

Great idea. May I suggest hooking the end of the urinal pipe to a container and seal the connection..when you leave the stand take the container with you, you don't really want to put your human piss scent around your deer stand.

@mountainbuck 2 жыл бұрын

Thanks for the feedback 👍🏻

@colequick6136 Жыл бұрын

Could you do or show a video on how the door was made and framed?

@mountainbuck Жыл бұрын

Hey Cole, thanks for checking out my channel! I’d have to take some video in November as the stand is around 5 hours away. I basically cut the plywood to fit and installed hinges in the aluminum frame and door (then added the sliders for the window)

@carfvallrightsreservedwith6649 Жыл бұрын

The cage can be unscrewed from the base negating the need to cut it.

@mountainbuck Жыл бұрын

Thanks for the heads up! I appreciate you watching and for the info👍🏻

@nathanrasbaugh7873 3 жыл бұрын

5:15 - Where did you get the pieces of molding for the window? Where could I purchase something like that?

@mountainbuck 3 жыл бұрын

Hey Nathan, thanks for checking out my channel! Hook me up and hit subscribe, if you could! I got the molding for the plexiglass window from Home Depot. Here is a link to product: www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156

@michaelkay3945 3 жыл бұрын

Where did you get your molding for the plexiglass?

@mountainbuck 3 жыл бұрын

Hey Michael, thanks for checking out my channel! Hook me up and hit subscribe, if you could. I was walking through the moulding aisle at Home Depot and found something that I thought would work. It was something like this (maybe even this exact item): www.homedepot.com/p/Stabilit-855-1-4-in-x-1-3-8-in-x-96-in-PVC-Composite-White-FRP-Divider-Moulding-10002-ZW096CB/205347156

@stevenhallo3629 3 жыл бұрын

Did you cut the top off both of the plastic part of the totes

@mountainbuck 3 жыл бұрын

Hey Steven, thanks for checking out my channel! Hook me up and hit subscribe if you could! Check out minute 1:10 of the video. This shows how I cut both totes. I cut the bottom plastic on one tote and the top plastic on the other. I kept the valve for the bottom, so I could run the piping to the ground and kept the top screw piece as the very top of the blind.