Mounting 1955 -1959 Chevy/GMC truck on a C10 frame / E-Z Chassis Swap Kit / C10 Frame swap

Рет қаралды 32,318

9 ай бұрын

I install the 1957 GMC cab on a 1977 C10 frame using E-Z Chassis Swap's bracket kit. The old cab mounts are removed along with a bunch of rivets in the frame. This is a great kit and saves lots of time.
www.e-zchassisswaps.com/
#gmc #57chevy #c10

Пікірлер: 22

@olchevy7983 8 ай бұрын

You the man. I bought same kit for my 57 to a 79 4x4 half ton. Im happy I found this.

@SuperchiefApache 5 ай бұрын

Yo man….would love to see that 4x4!

@jeffferanec4526 8 ай бұрын

Thx 4 sharing, looks like a class 1A mounting kit Sir Walter.

@SuperchiefApache 5 ай бұрын

I’ve done the same for my 59 Apache. Ed is a wonderful man, helpful, and has excellent customer skills!

@arkman8109 2 ай бұрын

This is the proper way to add modern front suspension on these trucks. I say that because a friend is hacking his up now to put a camaro subfram under it. I've watched these swaps and I'm baffled why you would want a weakened frame under your truck. I found two rolling frames for under 1000.00 dollars for him. This swap adds modern front and rear suspension with much stronger , easier frame shortening.

@alanwilliamson6421 7 ай бұрын

Great mounts 😊

@wallysworkin823 7 ай бұрын

Yes they are!

@arkman8109 2 ай бұрын

His truck not mine and he does like a project. Continued in next post.

@SuperchiefApache 5 ай бұрын

Just move the axle forward 3 inches! I’ve already done this!

@steamboat1341 2 ай бұрын

What would you recommend for my Chevy 3100 5window chassis swap to have 4x4 every day driver pull utility trailer, thank you for your time.

@wallysworkin823 2 ай бұрын

If it’s a 55-59 I would go with a square body chevy like I did or a 2000 up Tahoe is popular to. E-z Chassis swap has kits for both.

@matiassilfeni1957 5 ай бұрын

Hello, I am with the same project, I live in Argentina, where could I order that kit?

@matiassilfeni1957 5 ай бұрын

Ebay? Amazon?

@wallysworkin823 5 ай бұрын

The kit comes from E-Z Chassis Swap.com

@stevenincognito9498 8 ай бұрын

How much was it?

@wallysworkin823 8 ай бұрын

At the time, over a year ago the kit was $1100 if I remember correctly

@christimm394 9 ай бұрын

That kit saved a lot of time for mounting the cab, great job, where is the kit available?

@wallysworkin823 9 ай бұрын

E-Z Chassis Swap.com

@jakefriesenjake 9 ай бұрын

@@wallysworkin823what is the price of the kit, roughly? I'm debating on tackling this project. Now that I see you can either use an overhead gantry with a chain falls setup or a cherry picker to move the cab and box around (different video), it really got me interested. The kit would make the process smoother. I have buddies with cnc plasma cutting beds, and cnc programming skills, but would be an extra hassle.

@wallysworkin823 9 ай бұрын

@@jakefriesenjake I When I bought it a couple years ago It was right at or a little over $1000. The gantry is a life saver, found it used for a few hundred dollars.

@jakefriesenjake 9 ай бұрын

@@wallysworkin823 nice. Thanks for the reply. Now I must get my wife on board with this project 😂😂 She says that she doesn't want to roll around in an old krusty milk truck. Ha ha ha ha. I guess she doesn't have a fine taste in trucks.