Mounting CIOKS ADAM under Pedaltrain metro or nano+

Рет қаралды 55,150

CIOKS Power Supplies for Effect Pedals

7 жыл бұрын

This is a step-by-step guide on how to mount CIOKS ADAM power supply under a Pedaltrain metro or nano pedalboard.

Пікірлер: 35

@joelonsdale 2 жыл бұрын

Nice practical video, with all the peaks of these tiny pedalboards highlighted. I glued cane-tips to reach of the standard feet to raise the board by an extra 5mm+ and get enough clearance to better mount three per supply underneath. They original feet are not screwed in and removable but rivetted and irremoveable and I didn't want to start drilling them out.

@Roman_Kryachik 5 жыл бұрын

Adam is awesome power supply. Small and compact. 👍

@SesVeriyorum 4 жыл бұрын

Is pedaltrain metro 24 compatible with cioks dc7?

@Ruubinnn 3 жыл бұрын

Is the DC5 the same type of supply as the Adam? I have a difficult germanium fuzz on my nano+ pedalboard and want everything to be as quiet as possible. Would you advise the Adam or the DC5? Thanks in advance for your reply.

@charleswesley1490 3 жыл бұрын

What's "down" with the two Adam 9/12v switches? Adam side up or back side up? There's no marking on the unit. Confusing.

@MarlonUrdelas 4 жыл бұрын

Can the Adam Link single 9v 250mA output enough to power Nux Cerberus?

@BartoszXIV Жыл бұрын

Whats the screws spec? I've lost mine and now want to attach power supply to my pedaltrain...

@camdudley428 5 жыл бұрын

which power supply would you recommend for a metro 24? I have 6 pedals so far and plan on getting more. Thanks!!

@marker4986 4 жыл бұрын

Dc 7 or eventide powermax

@karllarsson4996 5 жыл бұрын

Wondering if the Fuel Tank or Fuel Tank Jr from T-rex will fit under the nano +? The fuel tank jr has 5 outputs and ADAM's only got four!

@ciokspowersuppliesforeffec7533 5 жыл бұрын

If you need more isolated outlets than 4 please take a look at our DC5. This one apart from one more isolated tap also has a toroidal transformer, more power and more voltage options incl. one dedicated 18V setting on the middle outlet. Both ADAM and DC5 are now GRIP compatible.

@derickalbert Жыл бұрын

Will this be able to power up HX stomp xl?

@joeygarcia6647 3 жыл бұрын

Really you have to move it around because of magnetic hum

@gabbo9795 7 жыл бұрын

if i have an Adam with 4 outputs can i run maybe 6 pedals by daisychainig two?

@ciokspowersuppliesforeffec7533 7 жыл бұрын

Yes you can. You can power two or three pedals of a single outlet unsing our Split Flex or 3-way daisy chain respectively. Just ensure you don't overload the outlet. The sum of current drawn by each connected pedal should stay below the limit of the outlet used.

@ciokspowersuppliesforeffec7533 5 жыл бұрын

Yes, no problem.

@TurtleTops 6 жыл бұрын

Does the AC 10 fit under a nano+ ?

@ciokspowersuppliesforeffec7533 5 жыл бұрын

Sorry, this is a no.

@danutchioreanpeter 2 жыл бұрын

Would a Baby fit under a Metro?

@rune288 4 жыл бұрын

you should really provide instructions with your feet kit. I have bought a pt mounting kit to raise the rear of my pedal train but have no idea how to change the feet out

@rtxf 3 жыл бұрын

Have you found out yet? I have the same problem right now :(

@rune288 3 жыл бұрын

@@rtxf I had to use a rivet gun if I recall,

@rtxf 3 жыл бұрын

@@rune288 I just glued the rubbers on, lets hope it will stay