Found that part comes with a chain roller know what’s that is?

Why, they’re weak . Especially if you build up the raptor just a hair

@@susdadu weak

hey can i ask u a ? i just installed a duel exhaust with pcv and my raptor 700 wont stay on ive messed with the idle but it doesnt fix the problem did u have any troubles like this? and whats a fci? is that a upgraded air filter?

honestly, you don't want to see how hot your engine is. It'll scare you a lot.

then marry him XD

curious about this too. is it just that the stock valve goes back quick?

I woke use ams oil or Lucas oil or yamalube

there are a few different options on the marked. we have actually switched over to one which incorporates 3 mounting bolts of the stator as well which give that option for guys who have already broken their case mount. Its built by a customer and is unbranded.

What matters more about octane rating is your engine compression.

1320_club _007 yeah it's Decked out 80 hp all custom

the AIS is a reed valve, the valve can get weak and loose, or build up with carbon and stay open. This will cause a lean condition and engine failure! .

MrCuervoRacing well, that's not a good thing. I guess a block off plate is a great idea. YAMAHA'S rule!

Is this an emission thing? Does it increase HP or just eliminate problems later?

@Richard - I have the same question! I'd assume more air in puts more back pressure on the engine and limits potential flow? I'd think there is a balance point.. Love to see a dyno b4 and after

normally it's needed if you remove the cat(removes some popping) or want to tune the bike(or run an auto-tuner), as you can't get a good reading with extra air getting dumped in.

They did not i don't believe

The special edition models had speedometers

Im not a fan of the duals for the 2015 and up head. Ive dyno tested and installed the Barker Duals for the 15+ and i see a few faults, the mid pipe is Hard Mounted, this imo will lead to future failures, excess weight, and performance is LESS then the Monster Single once engine modifications are made!!! We've made nearly 100 Hp thru the Monster Shorty and tested the other contenders on the market on the same engine and it was a HUGE difference in power. The more power over stock the bigger the gap between the Monster and others. The biggest benefit of the Barker Duals is the sound level is QUIET!!

1 pipe per cylinder.

If ur fans come on thats usually not good never had my fans turn on amd yes they work

@@TA-jp6df your fan may be working but is your sensors working properly the fan should always kick on from time to time every ride bro

I hit 79.84mph on my stock 2019 Raptor 700R this weekend. I think it had a tiny bit more left in it too. Do they have a limiter? (not that I really want or need to go any faster)

@@JarofMayonaise I know the 07 700 once in 5th the ecu changed timing curves so it wouldn’t pull but so many RPM in 5th. I put on a dynatek ignition and it did away with that problem.

the dealer can choose to void warranty for any modifications or reason. You can return the bike to stock at any time, just keep all the factory parts handy.

OK awesome I appreciate your advice, i'll be doing these mods pretty soon once the engine is all broke in. I got the same color as the one in the video it is a great looking bike

Harley you mean the 2019 ?

@@quadsticiles8403 Ah Yeah thats the 2020 700

I got the 2019 700r GYTR blue black

@@quadsticiles8403 700r and not se? What's the difference only form no function?

Bridgette Freihaut frame and suspension are pretty much the same

Craig Rodriguez yes, you can replace with the earlier years roller 06-12

MrCuervoRacing oh cool, I put a TM on mine but didn't know when the bearing was eliminated. Thanks

Good idea. I need to put some on the shelf. Most guys here put a longer swingarm on and the chain makes contact less often with the roller due yo a changed angle and ride height. But yeah idk what the hell they were thinking

Craig Rodriguez That’s what that noise is? I always wondered what that damn noise was.

808sand Blvke yeah! Changed out for a TM roller with the groove and it got rid of 95% of the noise. If I tightened my chain just a bit it would be gone all together

highly recommended. check our eBay listing. MrCuervoRacing ais.

@@MrCuervoRacing thank you!

Whats the diffrence between that and precision steering stabilizer

No way, cuervo is right man, ur engine actually lasting is more important then bump steer. I just bought a brand new 22 700r and these 3 mods will be the 1st things I do!!! I don't run any of my bikes unless I can check the temp.

I was wondering the same thing. Not quite sure the full reason behind changing it

@@AfterHoursWithMrC yeah I asked this question about a year ago and still don’t know lol. I’m thinking it probably don’t do anything or they would have told me so they could sale me one.

Bypass the EPA crap.

@@JetSkiBuyFixPlaySellChannel Cool so what does bypassing the EPA crap do for the rider? More HP? Better throttle response? Just to say "Fuck You" to the EPA? And what does that hose go to and is it needed? I don't want a $20 part to ruin my $9,000 machine I'm still paying for...

@@JarofMayonaise it helps with decel popping.I just cut the hose right above the reed valve cover and plugged the hose.

A L B PC5 MONSTER FCI

Monster pipe, fci and pcv. Give us a call and we can discuss options on that.

MrCuervoRacing what will adding those do to your raptor??

Junior Lara safety, safety, safety

what is the big 3?

yes

MrCuervoRacing awesome, thanks

Jiap Aguilar message us or call 951-743-6328 Also on EBay Ais block off plate link in discription

MrCuervoRacing ok thankyou

Been looking everywhere on the Internet and I think it is 3/4 inch

Yamaha dealer ship or a recreational dealer

Michael Talbot those are Mohawks. Thru Www.sandtoyzunlimited.com call John , tell him Cuervo sent ya

Oh yeah that’s right my dad knows the owner of it

Benjamin sides same

Finally someone !! Benjamin sides I think the same thing!!!

Benjamin sides i like made in japan

My 09 made in jpn is made 100x better then my 15 made in usa.

It’s just you homie. The old ones cool the news ones are real cool. 06-07 models were beastly tho

RockaBilly A temperature gauge in the tube, a case saver piece that protects the engine case from the chain and a seal piece for the hole in exhaust

We offer our Drain plug Reducer kit

MrCuervoRacing Where to buy the parts online? How about temp gauge on the handle bar for better visibility?

no, but any bike can get too hot if abused

give us a call 951-743-6328 or email sales@cuervo-racing.com the AIS plates are listed on eBay

What exactly is the AIS, an air injection system? Is it electronically controlled. Can it be removed without it causing an error code?

Chris Potts yes . No code. An electronic valve controlling a reed valve

MrCuervoRacing. So it goes from the intake to the cylinder head or ? When you let off the throtle it introduces air in the cylinder right?

Chris Potts yes. Fresh filtered air from intake thru valve them to the exhaust thru a transfer port in the head

Bc they’re not uncommon

Jaxson Goodman it was a joke because my tires are worn to shit

this is a customers bike. there isn't much difference between the SE and the base besides Color and shocks. the shocks are cheap to change, even buying the OEM SE shocks are super cheap. If you think you are somehow Better or Smarter because you paid more to have the "SE" color then you are mistaken. one can easily change all the components and add the bumper and heel guards aftermarket or gytr and upgrade the shocks for the same cost and then not be stuck with a Burgandy red frame.

@@MrCuervoRacing facts Big Facts

I love the red frame

Grew up on nothing but dirtbikes. First time I didn't have to put my feet down or lean the bike against something I fell in love. 2019 Raptor 700R.

Those have quite a few problems they cause in the process of trying to solve a rare one that can be fixed with proper maintenance.

Fast machines 500r energy absorption is why poly is used

Fast machines 500r autism

Dumb...