WOW, I really appreciate this video!!! I do pretty much all my own work and know a thing or two...I learned something new today.

Daniel really knows his shit. Been the only one I trust on raptors. Just got stranded 12+ miles out in Ocala National forest last weekend. Bike just SHUT off wouldn’t start. Assumed it overheated. No cell signal. Finally got it started. Got on main road. Shut off and wouldn’t start again for a while. Got back home in my city. Immediately researched engine code 33. Looked on KZfaq and sure enough Daniel just posted a video 1 month ago about the start relay bolt being super loose And SURE AS SHIT. I looked and mine was barely one or two threads. Thanks Yamaha. Y’all had 1 job to do Side note. I’m ordering that early on fan relay cause my fan hardly comes on and I seen temps over 200 constantly last weekend

Thank you for doing this video, I really appreciate how you break down positive and negative. I'll be bringing my 2022 stock to you to build!!, go northwest!!

just did a frame up job on a blaster and comfirmed the same.....stock lever went on. i had an asv breakaway on it and could adjust it where it would pull the cable far enough, it was uncomfortable to reach because it was adjusted so far out. great video! its been shared on fb for a great PSA

Thank you for the video! I was about to get aftermarket levers for my new raptor. I just make final decisions, and I would keep it stuck much posible I just upgrade full exhaust but that's about it .

Awesome video man! Really good info before I went out and bought new levers and grips for my raptor700! Question to piggy back off the clutch lever, do aftermarket thumb throttles give off the same tension issues?

I bought asvs, junk.. took it off and replaced with a 30 dollar pro taper lever. Lost half my clutch pull with asv

I run ASV levers but my setup is pretty custom for my xc build my the ASV levers you showed are all missing the barrel spacer as well. I’ve seen this a ton guys throw them out. My bars are free and clear as well just a tiny start button with a custom built harness.

Very interesting video. Thanks. Stock levers on my '21 Raptor 700R-SE👍🏻-Ohio #F150Tremor

I'm guilty of running ODI and a thicker CNCed lever on my older machines. You are totally correct, it does shorten the throw. Was going to put a set on my '19 Raptor but now you have me reconsidering it. I do like the fold-back design so if you decide to get all crazy, send it, and manage to flop it over out there on the trails you don't bust the lever clean off or bend it back further.

"Grow some balls" - Daniel, 2023

Works Connection makes a great set up.

Not sure if you guys work on Yamaha banshees at all but if so which clutch perch/lever do you recommend for those? I have OEM grips

What about using the perch spacer ? Will that correct the problem with the asv clutch lever?

Thank you for posting this. I have the exact same 2023 and just installed new bars, ASV F4 shorty levers and those thick odi grips 🤦🏻‍♂️. After watching this I went out and confirmed everything in the video with a digital caliper. OEM levers went right back on. So how do I order the lever you have on your raptor?

Can I take a dual port exhaust head off and older raptor and install it on a newer single port exhaust raptir

Who makes the pegs on that blue raptor?

if i extend the adjustable asvs all the way out, will it fix the problem?

Thoughts on stock lever setup with Rogue grips? '06 700. I have somewhat big hands and don't totally hate the stock lever setup, but I just happened to put Rogue grips on recently when I put a Precision Shock and Vibe mount and a CCP stabilizer on. Obviously trying to eliminate some arm soreness here... Haha. Thanks!

The 65 dollar pro taper perch is a good option you should test

Thank you for posting, I just got the F4 pro series (shorty blue) that says on box shaped like stock levers. Does this make a difference or No? With Fast Flex handlebars setup and haven't decided on grips yet.. Any advice for me would be greatly appreciated, and thank you in advance.

What’s the link for your clutch lever don’t see it on your eBay store

Great video! Link to your clutch level?

Daniel how do you eliminate the clutch switch? The cable on the stock clutch perch?

Is there a good hydrolic setup that can just bolt up outside the case?

What about running a magura clutch with a ASV lever? Does the hydraulic system squeeze better than a cable clutch?

I’ve herd the Works connection makes a good clutch lever setup. Better then ASV have you come across any

Is it normal for a all stock raptor to click hard into gear. First gear often clunks when going in. Not to hard but since it doesn’t do it always it seems weird. Same with reverse sometimes the reverse light comes on but i go and try to reverse and it clunks into reverse pretty hard

I've got ASV levers but I also have the ASV perch and I didn't see any of the bikes with a different perch so that should make a difference right?

ASV have to get the long lever and a different clutch perch for it to work correctly. They will send you one that works correctly

Could you adjust the asv to have the correct distance from the bars?

You have a website where thelevercam be purchased directly from site ?

The odi grips alot of quad guys are using the odi full waffle grips which is oversized like you said making the handlebar a wider diameter. Which it makes it harder to hold on to the handlebars resulting in arm pump. Easiest solution get the odi lock on grips half waffle .

how much is the lever that you sell ?

Do you ship internationally? And is it normal in the Raptor when I stop giving gas while driving and leave the clutch, to downshift without touching the gas or the clutch? Thanks

I would like to purchase your sport clutch lever, cant find it anywhere?

What if it's because the guys with aftermarket levers ride harder, this is April fools

That don't matter when you have a slingshot clutch..