Throttle body raptor 700 adjustment and features

Рет қаралды 41,584

CuervoATV

Күн бұрын

Cuervo ATV Raptor 700 specialists
951-743-6328 sales@cuervoATV.com
/ cuervoatv
www.ebay.com/usr/cuervoatv

Пікірлер: 26

@Trap..house. 4 жыл бұрын

Thank you ! Working on a buddy’s quad and this video made my life 10000 times easier! I really appreciate it!!

@RaptorWRLD 6 жыл бұрын

throws screwdriver @ cat lol nice vid very informative as always. been thinking of ordering your guys TB myself in the near future.

@trailblogger 6 жыл бұрын

Great video, I always wondered what that coolant line was for!

@MrCuervoRacing 6 жыл бұрын

TrailBlogger the infamous #trailBlogger thanks

@Arrioman 3 жыл бұрын

Were can i buy a throttle body cover the one were the cable goes mine is kinda rusty trying to get a new one?

@ozzy3746 3 жыл бұрын

I thought to calibrate the tps you just fire up POV reset the settings, do a quick pull of the throttle and save the settings??

@Mcduggies 3 жыл бұрын

What would cause engine to run very rich and back fire not only through the exhaust but back into intake? If that cold start idle control vale is stuck open. Would it cause engine to run rich? I really need some help can’t figure this thing out. 07 raptor 700 stock.

@bmwscott 3 жыл бұрын

do you sell the throttle body unit itsself or just a kit? i have 09 grizz 700 keeps binding and would like to get another

@tannerwhyte1487 4 жыл бұрын

Idle screw is just for "cold start". Otherwise it can not even be in there technically, wont make a difference on idle.

@nechoxd3208 6 жыл бұрын

I have a 2007 grizzly 700. My throttle cable was getting stuck, so I ended up removing a bunch of parts including the throttle body until it moved freely. The problem is, now it won't crack and there is a code 15 on the display. How do I fix this?

@mariocesargonzalezguerra4027 5 жыл бұрын

I have a Raptor 700R 2016 and i dont know the size of the throttle body that i have to use with a big bore kit 105.5 mm.... i will aprecciate your opinion..

@MrCuervoRacing 5 жыл бұрын

the +3mm throttle body bore we offer works best up to 80 hp, normally used on stock, stock valve ported and +1mm valve ported heads

@mariocesargonzalezguerra4027 5 жыл бұрын

MrCuervoRacing Im from Panama.. do you have informátion about how to install a Big Bore 105.5 .. in that Raptor.. is a Project That i want to do with my Dad..

@corporateair4853 5 жыл бұрын

YOU EVER THINK OF USING COUNTERSUNK SCREWS ON THE PLATE AND SHAFT?

@MrCuervoRacing 5 жыл бұрын

The shafts are cut down to only being 1 side. The plate is too thin to effectively use countersink and taper screws

@notwerudy869 3 жыл бұрын

How do you calibrate the throttle position sensor?

@boostedsaleen6146 3 жыл бұрын

Volt meter set it to 1volt

@ShrpShootr2792 6 жыл бұрын

What should he the rpms he at when its at operating temperature at idle

@MrCuervoRacing 6 жыл бұрын

Shrp_Shootr2792 depends on the build. On a stock or lightly modified motor 1650 to 1750

@ShrpShootr2792 6 жыл бұрын

MrCuervoRacing so i need to adjust my idle screw because according to my trail tech vapor its reading 1480-1580, all i have is a k&n air box delete and a gytr slip on i think, i cant tell if it is just the slip on or full exhaust

@brandonquenneville7330 6 жыл бұрын

golden*

@trailblogger 6 жыл бұрын

8:55 will a bored out throttle body make much difference on my stock 2008 700 engine with pipe and programmer or is that more for your higher horsepower builds so they can breathe better?

@MrCuervoRacing 6 жыл бұрын

TrailBlogger 3 hp . It's the next modification to do after big 3

@kevinvandusen7094 6 жыл бұрын

MrCuervoRacing - I have a 2017 700 I just bought..brand new I raced 450s but getting up in age (47) and getting difficult to the high strung Yfz set up...so the 700... I will be using for gncc in the vet +40 class. Its 100% stock for now. Any recommendations on how to go about gaining additional low end grunt? Without gearing changes. ....the races I do have some big open field sections ..50/50 btw I just discovered ur channel.. absolutely love it! Very very informative! Thank you for any direction.

@DUNEATV 4 жыл бұрын

Kevin Vandusen Would have been nice if he responded to your question...

@supnacho7454 3 жыл бұрын

@@DUNEATV we will never know