A great asset to hobby 💪💪👊👊 keep up the great work 👍
@MrD9 ай бұрын
Thank you 👍🏻
@stevelucas66909 ай бұрын
thank you
@MrD9 ай бұрын
You're welcome Steve 👍🏻
@ra_Amon3 ай бұрын
great work. Very good video. Thank you.
@Mike-z4c24 күн бұрын
Darren, how would I change the sticks to mode 4? Great videos!!
@trhammonds3 ай бұрын
How would you do multiple call outs on a switch. Example, RSSI, Volts, Temp, and amps.
@MrD3 ай бұрын
Just list them one after the other. The special functions will activate in order.
@loganmize149210 күн бұрын
I like your channel it's helper me out a lot with my new s20x radio, I have a question about the rssi ,I have arx8r accst receiver in a plane and it was working good for a while but all of a sudden the rssi warning is coming on all the time even when the plane is very close but the plane still handles ok how do fix this . Logan
@pixiecat61099 ай бұрын
which brand/size etc of micro sd card do you reccommend for the TX20s...i get a lot of "emergency mode" situations....which i have read are caused by the sd card..thanks
@MrD9 ай бұрын
I’m using the Samsung Pro Endurance MicroSD cards. They are made for being accessed often, and have performed faultlessly.
@pixiecat61099 ай бұрын
thanks@@MrD
@michaelladd989911 күн бұрын
Hi Daren I know you can add voice value to a switch or logic switch buuuuuut can you add a voice value to any of the four sticks? The reason I ask before you assume that I’m nuts is I’m building a tugboat and thought it might be fun to have call out of say “ full speed ahead” when you advance the throttle stick fully forward. Oh and if you think that is nuts I’m thinking of adding inav to run a camera and telemetry on the bridge( cockpit for you airplane types). Love your vids on ethos and inav keep them coming!
@ericboeckmans69 ай бұрын
Great video. About to buy a X20S and will certainly go, in details, through all your videos. Question on the telemetry topic : with the TD SR12, are telemetry for battery and altitude / altitude vario included into the receiver? Thanks!!!
@MrD9 ай бұрын
Hi Eric. Looking at the web site, it should. There is an onboard barometer. So you should get altitude, vertical speed, and the voltage of the battery.
@eduardo3049309 ай бұрын
Hi Daren. Thank you for another great video, you help me a lot to understand Ethos. I have a question, I will use a TD12 with 2 2S LiPo batteries connected. It’s possible to setup an independent alarm for each battery?
@MrD9 ай бұрын
The TD R12 will take up to 10v input voltage. So 2S is fine. But it will output that voltage to the servos. So if they are not HV servos, you would need to use a BEC before putting the power in to the receiver. I can’t see a list of telemetry sensors for the TD R12. It may be that each battery’s voltage is returned via the telemetry sensors. In which case, each battery can be monitored.
@ElseysEmpireRacing5 ай бұрын
Thanks, how can we readout "Cell Lowest" like in Edge TX with a FrSky FLVS volt sensor? I've tried with no success.
@jakubhya34574 ай бұрын
I don't have play value option in my x14 is this only tandem feature?
@RubyS.19 ай бұрын
Darren is there a way to add yaapu to the frsky x18?
@MrD9 ай бұрын
Hi Ruby, yes there is a repo for the Yaapu mapping widget for ETHOS. The telemetry script for ArduPilot also works. github.com/yaapu/EthosMappingWidget github.com/yaapu/FrskyTelemetryScript
@jeanluizsimoesdearaujo4218 ай бұрын
Hello, how to showing the battery voltage on the home screen?
@Austinpowers469 ай бұрын
Great video. Any chance you could do a video on x20 HDZero and a hdzero freestyle v2. I have both but can not get the video to work. Thanks.
@MrD9 ай бұрын
Sorry, I don’t have any HDZero equipment.
@stephenhughcrisp5 ай бұрын
Hi Darren. My transmitter which is the X 20 S does not offer me the play value command. I think I may have deleted it somehow because it did in the beginning. It also does not give me the welcome to Ethos command on start up. Anything that has to rely on reading a value does not work. Is there anyhow I can reset to the original settings or download the software to the original settings? Thank you very much. Stephen
@aaronmalusky34429 ай бұрын
I love your micro test balsa plane that you use on your test bench. Did you make that yourself? If so, did you make a video on the build?
@Redski699 ай бұрын
Hi i'm andre , how do you update the servo's , thx
@CertsUAsPilot9 ай бұрын
Followed the video and started over couple of times and still couldn't get it to work. When I changed the active condition from switch to logical switch BATT SWITCH as shown at 6:50 in the video and toggled the switch but got no read out audio at all. What am I missing?
@MrD9 ай бұрын
The BATT SWITCH is a very simple logic switch. So there’s not a lot that could be wrong. It should trigger if either of the two lines in it are true. If only the switch is not working. Make sure that when you select the switch, you are holding it, then click the return button while still holding the switch in the correct position. If you’re using the same switch as in the video, it should show SG with a down arrow. When you move the switch. You should see that line go bold in the logic switch. And the name of the logic switch should go green.