Make a Drill Press Vise From Castings Tips

Рет қаралды 32,104

6 жыл бұрын

Check out my new LOGAN LATHE COURSE on Vimeo.com.
This is a 3 part video series on how to machine a drill press vise from cast iron castings.
Castings by CF STRUCK--Casting Specialties

Пікірлер: 568

@ThisOldTony 6 жыл бұрын

That's a mighty sharp vise you've built there, Mr. Pete. Great project / wonderful series. In fact I might just build one of my own!

@mitchellstrobbe7779 6 жыл бұрын

This Old Tony make sure to look at the drawings. Seems to have been a problem point in your last project

@mrpete222 6 жыл бұрын

Thanks Tony

@anthonycalia1317 6 жыл бұрын

Nah, you'd probably wind up welding it.... :)

@MrUbiquitousTech 6 жыл бұрын

Purple Chemelon; it's okay, he has the serenity to accept the dimensions he cannot change. ;)

@andrewracho8804 6 жыл бұрын

Just make sure to take the lathe out of ‘time travel’ gear. We don’t want one of these ending up in Ancient Greece

@robmckennie4203 6 жыл бұрын

I don't know about anyone else, but I'd like to hear more about the business you had selling casting patterns to schools, that sounded really interesting

@aserta 6 жыл бұрын

Count me in! Sounds like quite the story.

@davidbarnhart6228 6 жыл бұрын

Yessss!

@FKreider 6 жыл бұрын

I would like to hear about this as well.

@mrpete222 6 жыл бұрын

Maybe

@stxrynn 6 жыл бұрын

Count me in too. You have a wealth of knowledge, and if your willing to instruct on that, I'd relish it. Good idea Mr. Mac.!

@bayparktownhomes3268 6 жыл бұрын

I’m a woman in Southern California watching your show nightly with my contractor husband and blacksmith son! We really enjoy your KZfaq channel! Blacksmith son will be at Fab Tech 2018 - hoping you’ll be there too.

@mrpete222 6 жыл бұрын

Thank you for watching, it sounds like you have a fine family. It's surprising to me, how many Womenwatch my videos

@hamedalizadeh6584 6 жыл бұрын

Hello mr.pete I'm from iran and after a very long working day, watching your videos and hearing your voice that even explains simplest things! In the shop is what u called pure entertainment. I learned a lot from u and still learning. You are the best.

@mrpete222 6 жыл бұрын

Thank you very much, I'm glad you liked it. Iran is a long way from here

@greasydot 6 жыл бұрын

My wife doesn't watch the videos but listens while I watch and she roars all the time. She will be the best shop assistant I have ever had if she would just come in the shop.

@mrpete222 6 жыл бұрын

Thank you for watching, and I'm glad I give your wife a few chuckles

@Droosmom1970 6 жыл бұрын

Yep I’m a woman and I watch with my husband. I’ve learned a lot from you and now I sorta know some of the things he’s talking about when he talks about what he does out in his shop.

@mrpete222 6 жыл бұрын

Thank you for watching, my own wife has never seen my videos

@5b4aezmarinoscyprus71 6 жыл бұрын

mrpete222 Join the club.... He he he

@bramdegeling7939 6 жыл бұрын

that is sad man :(

@norbs 6 жыл бұрын

Wow, you are a keeper

@anthonypirrello2473 6 жыл бұрын

Perhaps you should be glad she doesn't watch them considering how much you "borrow" from her kitchen equipment.

@junglejammer1 6 жыл бұрын

I very much, enjoyed this series, Mr. Pete. That's a nice looking vise you wound up with. I never blew the chips off the screen but, caught myself trying to brush sawdust from a picture in a magazine, once. LOL!

@mrpete222 6 жыл бұрын

lol

@modtwentyeight 6 жыл бұрын

I made one of these vises in 9th grade in 1959! Back when schools still had shop courses. Still got it. Not as nice as yours. It was made on a side mill and a surplus WW2 lathe. Ah, memories. Great work Mr. Pete!!

@mrpete222 6 жыл бұрын

Thanks for watching. I suspect thousands of those were made over the years

@michaelcerkez3895 6 жыл бұрын

Croatian, yes I am; third generation. And as my Croatian uncle stated to me, "Any man with a vocation has an estate". Thanks for the series.

@mrpete222 6 жыл бұрын

Thank you for washing, and your uncle was a wise man

@norbs 6 жыл бұрын

I'm watching for the entertaining and learning value, I bought a lathe because of you, I learned to operate it watching your videos you are my shop teacher.

@mrpete222 6 жыл бұрын

Thank you so much for watching. I am extremely pleased that you made me your shop teacher. Keep watching. I only have three years left to live and make videos.

@MrUbiquitousTech 6 жыл бұрын

mrpete222; bah, you'll have five more years for many more five year segments to come. And even after you're gone your videos will be teaching for centuries.

@GadgetsCrafts 6 жыл бұрын

I am from Morocco, a microbiologist, and I enjoy your videos very much, thanks

@mrpete222 6 жыл бұрын

Thank you very much

@MrGoosePit 6 жыл бұрын

I loved this 3 part series Mr. Pete. I also appreciated hearing the history of Mr. Struck and some of your own history as well. Thanks!

@mrpete222 6 жыл бұрын

👌thank you, I'm glad you liked it

@Hermanb1915 6 жыл бұрын

Hi Pete, watching this from South Africa. I have 5 thumbs to each hand but is addicted to machine shop KZfaq channels and watch them and is in awe of the machinist's skills. Love your work and comments during your clips. Must have been being one of your students! Regards

@mrpete222 6 жыл бұрын

Thank you for watching, south Africa is a long way from here

@SuperKingslaw 6 жыл бұрын

Another great video series! Thanks Mr. Pete!

@mrpete222 6 жыл бұрын

Thank you

@RRINTHESHOP 6 жыл бұрын

The vise came out very nice. enjoyed the series.

@mrpete222 6 жыл бұрын

Thanks Randy

@MoondyneJoe 6 жыл бұрын

Great video Lyle and thankyou for all the work you put into creating / producing all of them what a legacy you are creating

@MaturePatriot 6 жыл бұрын

I agree. His legacy will keep inspiring long after we are gone! Wish I could afford to buy all his training videos to leave to my great grandsons!

@mrpete222 6 жыл бұрын

Thank you very much

@MoondyneJoe 6 жыл бұрын

Credit where credit is due Lyle

@Keenafy 6 жыл бұрын

Moondyne .Joe I very much agree ^^^^ you don’t see too many older gentlemen taking advantage of these newer opportunities like he has been for the past 8+ years. I wish with all my heart that my grandad/dad would have made videos sharing all their knowledge with the world. But also as a way to remember them forever, their personality, sense of humor, everything. It really is a beautiful thing. Many many blessings

@MoondyneJoe 6 жыл бұрын

Keenafy Their are a few around the net, but they are few and far between I got my mum onto the net about 14 years ago she was looking after my step father who then, was suffering with Alzheimer's, for mum it was a way to get into the outside world to communicate with other people. As she doesn't drive and Gordon had to give up his Driving licence for obvious reasons mum was stuck looking after him She isn't able to do what Lyle does but at 92 in a few weeks she still sends emails . watches KZfaqs and generally surfs the net when she cant sleep or is just lonely I am immensely proud of her We do live in enlightened times IF we want to learn, I have been on the net since 1991 and things have changed so much since then, but one thing I have noticed very much the things I have and want to learn about have become easier to find and a lot of friendships have been made ( even a Canadian wife for a time, I live in Western Australia) Tony

@ArcticWolfSilver 6 жыл бұрын

Thank you, Tubalcain, for making these and all your other videos! I enjoy them immensely, though I don't have a machine shop. But I am a jeweler and metal hobbyist! Since your proclamations about cast iron, I have begun trying it out with some of my tools and am quite impressed! ~Richard

@mrpete222 6 жыл бұрын

Thank you for watching. Yes, I think you'll enjoy working with cast iron

@donaldmccombs5566 6 жыл бұрын

I am a beginner machinist in Oklahoma and I love watching your videos, thank you.

@FredMiller 6 жыл бұрын

Donald, I started out in machining when I retired 13 years ago. Mr Pete was my KZfaq mentor. If you like this kind of thing take a look at my channel to see more machining content.

@donaldmccombs5566 6 жыл бұрын

Fred Miller I will, I retired from the Army about 2 and a half years ago. So I went back to school to learn something new. Oklahoma has a lot of machine shops because of the oil industry and aviation industry that we have state run trade schools that teach manual and CNC. Our instructor uses his videos in class.

@mrpete222 6 жыл бұрын

Thank you for watching

@mrpete222 6 жыл бұрын

Sounds like they have a great education program in Oklahoma

@brucematthews6417 6 жыл бұрын

A really nice journey back to your past. Hardly the world's best drill press vise. But with the personal connection one which I'm sure will have an honored place in your shop. Really enjoyed the three parts.

@mrpete222 6 жыл бұрын

👌

@DudleyToolwright 6 жыл бұрын

Great video as always. I watched a ton of your videos before I took machining classes at my local adult school. I really learned a lot. You always explain your thought process which really gives insight. Thanks again.

@mrpete222 6 жыл бұрын

Thank you for watching, and I'm glad I was able to help

@mikenixon9164 6 жыл бұрын

Great 3 part series. Very nice looking vise. Keep them videos coming !!!

@mrpete222 6 жыл бұрын

Thank you very much

@herbhartman7528 6 жыл бұрын

Really enjoyed, been a Machinist all my life, its nice to compare certain techniques ive picked up over the years to yours a seasoned and experienced shop teacher! Thank you!!

@mrpete222 6 жыл бұрын

Thank you, I'm glad you like it. I'm sure you have some techniques that would work well in my shop

@jukeman57 6 жыл бұрын

Great project. That’s a handy little vice anyone would be proud to have. Great instruction and advice Mr. Pete.

@mrpete222 6 жыл бұрын

Thank you for watching

@mmccorm11 6 жыл бұрын

I enjoyed this project very much! Thank you for taking the time to film it!

@mrpete222 6 жыл бұрын

Thank you for watching

@kevCarrico 6 жыл бұрын

it’s beautiful! great operations and explanations as always - thank you, mr. pete!

@mrpete222 6 жыл бұрын

Thanks

@CWO3-uscg 6 жыл бұрын

Great series. My dad was an aviation machinist for nearly 40 years. I always enjoyed watching him at work. I became a Mechanic/engineer in the Coast Guard for 24 years. I learn a lot watching you. Thank you!

@mrpete222 6 жыл бұрын

Thank you for watching, and thanks for serving in the Coast Guard

@michaelmurray3422 6 жыл бұрын

That was very enjoyable to watch!!!! Sometimes just seeing the ways to hold things or clamp them down to work on them is quite informative. Very nice Job!!!!! Thank You!!!!

@mrpete222 6 жыл бұрын

Thank you very much for watching

@paulkoomen5262 6 жыл бұрын

When I took shop in High School From 1964 To 1968, and went back in 1969, to take 4 years of aviation in 1 year as a special student . I was lucky to go to a school, that had all the shops, I mean all. From wood to cooking and sowing classes, body shop to Aircraft, From electrical, to machines shop, and castings, and type setting. And we never had the luxury of some of the great videos, that you have made over the years. I wonder how many teachers, are going to do something in their shops, and before the kids do their project say watch MR Pete. First. ( I see in your new videos your not as long winded, as you used to be, I am smiling when I say that. ) Even I, an old guy have learned a lot. Have a small lathe and small mill, and lots off fun. Ok teach have a great day.

@mrpete222 6 жыл бұрын

That was some high school, that had all of those different trades or shops. I think that's a thing of the past. You are right, many teachers have told me they use my videos in class. Some even use my lathe courses. Thank you for watching

@paulkoomen5262 6 жыл бұрын

Its Central Technical School. 725 Bathurst street. Google it and see. When I was their, they took part of the football field. And added a Welding shop. this school owns 2 city blocks. 3tories high. I can actually say, I miss walking those halls and look into all those classroom and seeing what the students were doing.

@sefarkas0 6 жыл бұрын

Waiting for part 3, great that you are an early riser!

@mrpete222 6 жыл бұрын

Thanks

@ronsites2694 6 жыл бұрын

Great series Mr. Pete, lots of different operations. Thanks for the videos!

@mrpete222 6 жыл бұрын

Thank you for watching and commenting

@Siskiyous6 6 жыл бұрын

As a Teenager working on a rock Crusher we used 11/16ths wrenches all day long. And we changed bolts all day long. The rock takes its toll. Nice project.

@mrpete222 6 жыл бұрын

Thanks

@Keenafy 6 жыл бұрын

So much respect to you Sir, I’m very new to machining operations, I’m in trade school for it now, started at the beginning of the year. We’re learning the lathe now and I think it is SO COOL. And I must say your videos are not only extremely informative, but also very entertaining. Your sense of humor reminds me that of my grandad, who is passed. Blessings and positivity your way.

@mrpete222 6 жыл бұрын

Thank you very much for watching. Good luck with your studies at the trade school. It's a good thing that you are doing getting that training

@DreadDeimos 6 жыл бұрын

I'm a software developer from Ukraine and I watch your videos regularly, both for entertainment and learning.

@mrpete222 6 жыл бұрын

That's awesome, good to know you

@mdshunk 6 жыл бұрын

Thank you for doing this project. This is one of your best!

@mrpete222 6 жыл бұрын

Thank you very much

@TheArsonsmith4242 6 жыл бұрын

I think this may be my weekend project. I've got a chunk of cold rolled I'll give a try and see how it goes.

@dermotkelly2971 Жыл бұрын

Great neat job Pete.

@pauldevey8628 6 жыл бұрын

That was a great video. Learned much. I wish these castings were still available.

@mrpete222 6 жыл бұрын

I just found out that they are available. From Okeefe foundry in Ohio

@anthonycalia1317 6 жыл бұрын

Thank you for understanding that we can all learn and enjoy watching a project without regard to how practical its purpose. We enjoy the journey much more than the destination.

@mrpete222 6 жыл бұрын

More and more, I enjoy the journey

@luisenriquealabattgarza253 6 жыл бұрын

I really enjoy your videos MrPete, i really think that its necessary a channel with this information in spanish, because you bring to the people a bunch of knowledge, and i want to transmit to the spanish talking audience. Thank you very much

@mrpete222 6 жыл бұрын

Thank you, I wish somebody could translate it into Spanish

@luisenriquealabattgarza253 6 жыл бұрын

mrpete222 If you wanted, i can help you with the translation to spanish, greetings Mr Pete

@JamesDedmon 6 жыл бұрын

Enjoyed the series, a neat project. I'm a big fan of 638 Loctite especially on things that I don't intend to remove su k as those ball ends. I used them on my mill z axis driver tool for the brass screws, also when I pressed the socket inserts in with the press fit. Good stuff

@mrpete222 6 жыл бұрын

Yes, it is good stuff thank you for watching

@SpotterSky 6 жыл бұрын

Hi Pete Nice work. It's a pleasure to see you work with tools and come up with great ideas. I like your mini series about your projects :)

@mrpete222 6 жыл бұрын

Thank you very much for watching

@iangraham6730 6 жыл бұрын

Nice job! Looks great!

@warri0r-p0et18 6 жыл бұрын

Great video Mr. Pete! As always, I appreciate your humor!!

@mrpete222 6 жыл бұрын

Thank you

@thorsbyguy5121 6 жыл бұрын

Croat from Western Canada reporting in. Thanks Mr. Pete!

@markpack4494 3 жыл бұрын

I am going to make one of the vices, thanks for the idea Mr. Pete

@mrpete222 3 жыл бұрын

👍

@FredMiller 6 жыл бұрын

Blowing chips off the screen. Yup, I admit it. Than had a good laugh at myself. Great series, as always, Mr Pete. My next two projects are a DRO for the tailstock of my lathe and an internal keyway broached with an Atlas 7B. Both of these projects would have been used on your vice project. You continue to be an inspiration me..

@MaturePatriot 6 жыл бұрын

Fred Miller - I keep wanting to grab a chip brush. lol He is an inspiration.

@MoondyneJoe 6 жыл бұрын

Yup usually it get to the "take a deep breath" point then think what are air hoses for !

@mrpete222 6 жыл бұрын

lol

@FredMiller 6 жыл бұрын

I just posted my Poor mans tailstock DRO video on my channel. Notice I still have the original oil Dobber LOL!!

@FredMiller 6 жыл бұрын

LOL Yup, joe, done that one too...

@roadrunnerricka4441 6 жыл бұрын

Thanks Mr. Pete. Another great video. I learn a lot watching all of your videos, wish I'd had you for my shop teacher. I'm not a machinist but really enjoy turning things on my old 9a lathe. Still hoping that someday I can find a mill that I can afford. They aren't as easy to come by here in North central Wa. Watching you work is kind of like therapy to me. My wife also enjoys your videos although she has no interest in machining or mechanics, she loves listening to you and quit often can here her laughing at your comments. Looking forward to your next one. Thanks again and keep up the good work.

@mrpete222 6 жыл бұрын

Thank you for watching, I'm glad your wife showed some interest. Keep your eyes open, showing her or later you will find that Mill

@MrUbiquitousTech 6 жыл бұрын

You do have him as your shop teacher, it's never too late!

@roadrunnerricka4441 6 жыл бұрын

ShysterLawyer True story. Although sometimes I think we would be better off without the internet, KZfaq is a mighty handy tool to have.

@markoradolovic 6 жыл бұрын

Thanks from Croatia for an excellent vise project for the shop.

@mrpete222 6 жыл бұрын

🤙🤙👌

@stime6472 6 жыл бұрын

Thanks Mr Pete Great Series!

@mrpete222 6 жыл бұрын

Thank you very much

@user-wo7rz3yn4o 6 жыл бұрын

My wife in the back ground heard your comments and chuckled and roared, but I still couldn't get her to watch with me. She recognizes your voice though.

@mrpete222 6 жыл бұрын

Thanks for watching. She doesn't need to watch, as long as she listens

@MrUbiquitousTech 6 жыл бұрын

My wife knows the voice well too, the most watched channel in this house by far is Mr. Pete!

@johntompkins147 6 жыл бұрын

Enjoyed this series very much. Thanks

@mrpete222 6 жыл бұрын

Thank you for watching

@jat4327 6 жыл бұрын

This brings back memories. In high school I made one very similar, we cast the body and jaw in aluminum. I wish I still had it.

@mrpete222 6 жыл бұрын

Thank you for watching

@prafullarwade 5 жыл бұрын

Hi, I'm from India. Good work over there. I liked the videos and loved to see the machining skill sets also that you provided during the process. Keep it up.

@calumbmx1 6 жыл бұрын

really good series, enjoyed the build

@mrpete222 6 жыл бұрын

Thank you very much, keep watching

@stephenwagar2663 6 жыл бұрын

Nice Lookin Little Rig Mr. Pete !!! Great Project... Best Regards

@mrpete222 6 жыл бұрын

Thank you very much

@kevinhamling4675 6 жыл бұрын

G'day Kevin from Australia. Another great series. A+

@mrpete222 6 жыл бұрын

Thank you for watching

@excession777 6 жыл бұрын

Australian, watchng for entertainment and machining without having to clean up the mess or own the machines! Long time viewer, keep on making videos, this channel is so much more interesting than anything on commercial television; you and the other KZfaq channel creators are why I pay Google for KZfaq Red, so you get something from us viewers.

@mrpete222 6 жыл бұрын

It seems there are quite a few from Australia watching my videos. Thank you. I use KZfaq read also

@karllaun2427 5 жыл бұрын

Great information in this video. I had a little "incident" on my drill press while trying to drill a brass block. The 7/16" drill bit shattered and my Palmgren 000 vise flew across the room, breaking one of the feet and bending the screw extensively. I made a replacement screw for the vise per the instructions in this video. I'm going to modify my drill bit before attempting this operation again.

@mrpete222 5 жыл бұрын

Wow, that is scary. Drilling brass is dangerous. The drill bit can't really grab

@MrPatdeeee 6 жыл бұрын

Love it! Fine, fine, fine! Thanks to "our" Mr Pete.

@mrpete222 6 жыл бұрын

Thank you for watching

@SorenVemmelund 6 жыл бұрын

Greetings from Denmark :-) I truly enjoy your videos AND your opinions about this and that.

@mrpete222 6 жыл бұрын

Thank you from America

@mrc1539 6 жыл бұрын

Mr Pete, my wife will walk by several times during a video, look over my shoulder and get the most bewildered look on her face then wonder off muttering to herself. ( I think she is a closet watcher ) 😉 ! Thanks for the video !

@mrpete222 6 жыл бұрын

lol

@stevenacarter77 5 жыл бұрын

Outstanding set of videos mrpete222 even on the 2nd time around.

@mrpete222 5 жыл бұрын

Thanks

@bkoholliston 6 жыл бұрын

Nice video series!

@mrpete222 6 жыл бұрын

Thanks

@rickolson9011 6 жыл бұрын

Great series, thanks for all the tips!

@mrpete222 6 жыл бұрын

Thank you for watching

@zachaliles 6 жыл бұрын

I love me some green retaining compound. Especially when I get the chance to watch someone try to take something apart that was put together with it.

@mrpete222 6 жыл бұрын

💪👌

@Highstranger951 6 жыл бұрын

Green weld

@mathewmolk2089 6 жыл бұрын

Warm it up.

@stanervin7581 6 жыл бұрын

zachariah liles That's when you break out the fire wrench

@aserta 6 жыл бұрын

You could make neat ball ends using ball end nuts. You chuck 'em on the lathe and cut the hexagon. Done it, looks neat and clean.

@MrUbiquitousTech 6 жыл бұрын

Hey, you know what, I saw a video of a really smart guy how did just that. Lemme see..... oh, here it is: kzfaq.info/get/bejne/epaIn5N-3cfHZqc.html

@mrpete222 6 жыл бұрын

Thank you, I will try that. We call them acorn nuts

@MrUbiquitousTech 6 жыл бұрын

;o)

@kenzpenz 6 жыл бұрын

OMG I went to the video you are showing and sure enough, I too watched that great video and commented. Hard to believe that much time has passed. Mr Pete does such great work and it sure makes my day when I see another of his great videos. Thanks for bring this to my attention, a trip back in time well worth it...Ken

@TheUlrikkaul 6 жыл бұрын

As always very informative, mrpete222. A nice way to end the weekend. Greetings from Denmark

@mrpete222 6 жыл бұрын

Thank you for watching, and greetings from the USA

@NLDHGRockStaR 4 жыл бұрын

exelent video's sir, much respect for people who are so dedicated to precision , its like watching a masterclass . regards from the Netherlands.

@mrpete222 4 жыл бұрын

Thank you very much

@CactusCove 6 жыл бұрын

Posted my first eva video on you tube my 3 year old loves you tube and wanted to do a video of his favorite toy your sa oscillating i built a few years ago so his mum and him created love your channel and has had a very positive influence on my life and job thank you so much

@mrpete222 6 жыл бұрын

Thank you so much, I'm glad you like my videos. My three-year-old grandson watches KZfaq constantly. But mainly animal videos. Keep watching

@CactusCove 6 жыл бұрын

mrpete222 brillant youtube is a great place to lern

@minskmade 6 жыл бұрын

beautiful..loved the ball bearing handle ends...briiliant

@mrpete222 6 жыл бұрын

I am glad you liked the ball ends

@hinkelstein4six 6 жыл бұрын

hello Mr. Pete, I´m from good old Germany and I´m not a woman. You made a good job and all is well done. So long for now, Georg

@mrpete222 6 жыл бұрын

Good to hear from you. I am half German. My mother could speak German, I wish you had thought the language to me.

@TimothyGack 6 жыл бұрын

Thanks for another terrific video Mr. Pete. My wife and I both enjoy your videos, which are a lot more fun on the 55" TV than watching on a little computer screen by the way.

@mrpete222 6 жыл бұрын

Thanks for watching, I watch almost all of my KZfaq videos on a 55 inch screen

@MrUbiquitousTech 6 жыл бұрын

Thanks Mr. Pete, enjoyed much!

@mrpete222 6 жыл бұрын

Thank you

@Tryin2FlyII 6 жыл бұрын

Looks Great mrpete, I wish those castings were still available I need a vise for my drill press btw - I cracked up when you brought up the "Monkey" Thanks for another good one ! as always two thumbs up Sir!

@mrpete222 6 жыл бұрын

Thank you for watching

@Badgermatt-nc5nr 6 жыл бұрын

Thank you sir, I would love to find a set of castings like those to make one. You did a wonderful job!

@mrpete222 6 жыл бұрын

Thank you very much

@vedranlatin1386 6 жыл бұрын

Croatia reporting as requested :)

@mrpete222 6 жыл бұрын

lol

@SandBoxJohn 6 жыл бұрын

My late mother made one back in the 1940s in my fathers basement machine shop. It was similar to the Cardinal Speed Vise.

@mrpete222 6 жыл бұрын

Awesome that your mother made a vise

@leecarter9525 6 жыл бұрын

Fantastic Mr. Pete, thank you so much.

@mrpete222 6 жыл бұрын

Thank you for watching

@jefferyjohnson5421 6 жыл бұрын

Exceptional video. You made a Handsom looking vise.

@mrpete222 6 жыл бұрын

Thank you very much

@pijnto 6 жыл бұрын

One the best series I have watched re metal/machine work for along time, now I wan't one of those impossible to get cast kits

@mrpete222 6 жыл бұрын

Thank you for watching. Maybe one will show up on eBay

@pijnto 6 жыл бұрын

You never know, then all I have to do is get sent down under

@daveanderson2316 6 жыл бұрын

As a machinist myself, it's fun just to be the guy watching instead of doing. Thank you Mr Peterson.

@mrpete222 6 жыл бұрын

lol

@Jim-ie6uf 6 жыл бұрын

Always informative and just plain cool.

@mrpete222 6 жыл бұрын

Thank you very much

@saartal4524 6 жыл бұрын

Wonderful video!!!

@mrpete222 6 жыл бұрын

Thank you very much

@nadam35 6 жыл бұрын

"it's softer than spreadable margarine" love your videos mr. pete!

@mrpete222 6 жыл бұрын

Thank you for watching

@BUILDNIGHT 6 жыл бұрын

Good smart setups on the mill. Very nice little vise you now have. One pet peeve of mine though is the use of Dead Centers in the Tailstock. Dead Centers were designed to be used in the Headstock because they turn with the work. Live Centers are to be used in the tailstock so they will also turn with the work. If a Dead Center is used in the Tailstock, it will wear out the center as the workpiece spins on the dead center point. The one exception to this rule is if you are turning Bronze, which acts like a bearing and won’t destroy your dead center. rant over. Nice job.

@mrpete222 6 жыл бұрын

That is a carbide tipped center

@BUILDNIGHT 6 жыл бұрын

mrpete222 yes...its carbide tipped but will wear just as carbide inserts or carbide endmills wear. best used for brass or bronze. Given the clearance design of it, i imagine that was the intent. the clearance wouldnt benefit anything if used in the headstock.

@MrBobbin01 6 жыл бұрын

Just to let you know. My wife and I are going to do one of your vices. Won't be cast iron though, you're right can't find castings anywhere. Thanks for all you do.

@mrpete222 6 жыл бұрын

Yes, you can now buy those castings. That will be showing on tomorrow's video

@The411 6 жыл бұрын

Thanks for the video! I don't know if you did it on purpose but when you were talking balls it cracked me up!

@mrpete222 6 жыл бұрын

lol

@jeffreylehn8803 6 жыл бұрын

Nice Job , we had these castings in school but I never got to make one.

@mrpete222 6 жыл бұрын

Too bad you did not get to make one

@nogmeerjan 6 жыл бұрын

I'm from Belgium. My girlfriend listens sometimes when I watch. We agree your video's have a nice touch of "grumpy old men" ;-) So yes we like the rambling :-)

@mrpete222 6 жыл бұрын

lol

@Daledavispratt 6 жыл бұрын

Thoroughly enjoyed! Thanks, Mr. Pete! :-)

@mrpete222 6 жыл бұрын

Thank you

@ozar62 6 жыл бұрын

Brought back a lot of good shop class memories, thank you. Unfortunately "shop class" has no place in today's curriculum and was replaced with C.A.D.,C.I.C., 3D print programing etc. which is progress but nothing matches up to hands on tooling and fabrication that not only taught what stock to use for a particular job but introduced problem solving and COMMON SENSE. The last time I mentioned a three jaw chuck to a young man at the educational facility I work for he looked at me like I had lobsters crawling out my ears and thought it was a guy named Charles with a severe birth defect. Thanks again and I'm looking forward to more instructional video's. Ozar62

@mrpete222 6 жыл бұрын

Everything you said is true

@markn1038 6 жыл бұрын

Nice series again, thanks for that. The only thing I would do extra is mill a slot on both ends of the vice so i could bolt it down to a table.

@mrpete222 6 жыл бұрын

I may do that someday

@andymandyandsheba4571 6 жыл бұрын

enjoyed excellent project mr pete

@mrpete222 6 жыл бұрын

Thanks

@peteengard9966 6 жыл бұрын

Love to watch your videos. Big truck and large mining equipment mechanic here. I have some mechanical pullers and some pushing screws have a ball bearing on the end that ride in a simple cone shaped bottom of the pushing plate or tip. This increases the pressure or decrease the amount of force needed to tighten it. Why not do that to your new vise? Keep the videos coming.

@mrpete222 6 жыл бұрын

Good idea, I need to try that

@hitnmiss49 6 жыл бұрын

A very nice project. I wish those castings were still available. Lonnie

@mrpete222 6 жыл бұрын

Yes, it's a big loss for America

@kevinwillis9126 6 жыл бұрын

Enjoyed this series very much... Thanks for sharing sir..

@mrpete222 6 жыл бұрын

Thank you for watching

@pjhalchemy 6 жыл бұрын

Great series Mr. Pete and always enjoy the humor. Came out real nice and the blued balls give it a nice touch. Didn't seem to have too much wobble. I know you have a Ton of vices around your shops, but are you going to make jaws for it? The setups for drilling the screw holes and milling the V's would be interesting. Thanks Again!

@mrpete222 6 жыл бұрын

That would be a good future project

@cffellows 6 жыл бұрын

Nice build. I have turned the steel jaw facing on my vices around. I find the vertical and horizontal v-grooves for holding round stock is more of a nuisance most of the time than a help. If I want to hold some round, I just use a parallel as i would in the milling vice.

@mrpete222 6 жыл бұрын

I agree, at least some of the time I agree that it is in the way