Ms 462 vs ms 261

Рет қаралды 87,630

Baptiste Bannier

4 жыл бұрын

Ms 462cm bar 50 cm (20pouce)3/8
Vs ms 261cm bar 40 cm(16pouce) 3/8 Picco super (PS3)
Cut 1/2 stère

Пікірлер: 17

@sydranauchannel1012 2 жыл бұрын

Good job master 👍👍💪

@alexg166 2 жыл бұрын

I got them both very happy with them

@user-tv3sf4hl3y 4 жыл бұрын

Happy new year my friend!! Both very good and strong saws! Put some bigger logs for comparison!!

@moppedmann123 2 жыл бұрын

Is it a nice pairing, or would 462 / 241 be a better one?

@MrBaptiste003 2 жыл бұрын

It’s 261 and 462 the 462 be better than 261 but for my firewood at the house y use only the 261 cm every day or the years y use the 462 only in the Forest about 2 day for years

@SuperBODY90 3 жыл бұрын

What do you think about the weight of the 462? Is it a hard difference compared to the 261?

@em4703 3 жыл бұрын

The power-heads are like 1kg difference and 1.5kg or more when fully fueled and with proper bars on. You'll definitely feel the difference, its all about what you need to do and how fast. Might not seem much, but if you need to also limb trees instead of just felling and bucking, you'll wish you had a 261 or lighter instead of the 462. 261 is a better all-purpose chainsaw, 462 is more raw power at the expense of weight and less maneuverable. Best thing is to have them both :D

@SuperBODY90 3 жыл бұрын

@@em4703 hehe thanks for your feedback :-)

@fredericcornuaud3510 2 жыл бұрын

Les deux c'est le top et elles se complètent

@MrBaptiste003 2 жыл бұрын

Oui les 2 sont parfait comme paire malgré que la 261 c’est plutôt mon beau père qui s en sert pour ébrancher moi j’abat et je débite avec la 462 et je fait aussi tout le reste avec

@MrBaptiste003 2 жыл бұрын

On gagne beaucoup de temp avec la 462

@adrianstefan23 2 жыл бұрын

👍😀👍👍

@kellyronaghan5587 4 жыл бұрын

The ms261cm is going to be my next saw after my ms291

@JDubbsadventure 2 жыл бұрын

You may like the ms362 it’s a little bigger than the 291

@jureslegel3877 2 ай бұрын

did you notice on this mtronic saws when you go off throttle saw is not leting the rpm go to perfect idle right away it goes down then up a tiny bit then down to normal idle. On my 462 i fixed this with messing with the exaust hole now it works perfect. On my 261c i wanted to fix it like on 462 and when i messed with exaust i made it even worse. And another thing is when refueling in forest when you come home and not really well clean the gas tank cap you get small leakage almost guarantee.