MSFS Garmin G1000 Autopilot Tutorial (AH In-Depth G1000 tutorial, part 2)

Рет қаралды 41,300

Alpha Hotel Flight Simulator Training

Күн бұрын

Welcome back to Alpha Hotel Flight Simulator training!
This video is part 2 in our in-depth series on the Garmin G1000 panel. This video will focus on how to use the Autopilot (Automatic Flight Control System, or AFCS.) Part 1 focused on the basic functions and features of the G1000 ( • MSFS - In depth Garmin... )
Part 3 will focus on using the GPS
The Garmin G1000 is one the most common panels found on the game, so learning to operate this avionics suite will greatly enhance your enjoyment of flight simulator. Learning to use it's autopilot will enable you to use the autopilots in most of the GA aircraft in the game, and give you a good foundational knowledge for using cockpit automation in many different types of aircraft.
As always, if you’ve enjoyed the content, please don’t forget to like the video, subscribe to the channel, and ring the notification bell to be alerted to new content.
Be sure to check out the rest of the channel for more content on MSFS flying skills! Thanks for watching!
All charts shown in this video are available at SkyVector.com
Chapters:
Chapters
00:00 - Intro
02:33 - AFCS overview
04:31 - AFCS controls
06:53 - AFCS status display
08:56 - Autopilot power
11:40 - Autopilot engagement
13:48 - Autopilot disengagement
16:49 - Roll hold mode
19:02 - Heading hold mode
21:18 - Nav and BC mode
26:05 - Pitch hold mode
28:47 - Altitude hold mode
30:11 - Vertical speed hold mode
31:57 - Alt capture function
33:09 - FLC mode
40:39 - APR mode
44:39 - Cirrus SR22 differences
49:00 - Cessna 208 differences

Пікірлер: 71

@elirohnphd5613 3 ай бұрын

This is THE BEST G1000 tutorial I came across EVER. This includes the "transition" course I took as a commercial pilot from steam gages to modern flight deck. I thank you for your superb quality detailed tutorial.

@AlphaHotelFlightSimulation 2 ай бұрын

@elirohnphd5613, Thanks for the kind words. Glad you enjoyed the content, and thanks for watching!

@harlanmeyer5219 2 жыл бұрын

Your tutorial videos on the G1000, the 530, and the basic autopilot in the C172 are probably the best that I have seen. Thank you for producing these for You Tube. I am surprised that more folks haven't found them and subscribed to your channel. [Please] keep up the good work!

@AlphaHotelFlightSimulation 2 жыл бұрын

Thanks for the kind words, Harlan, and thanks for watching. Guess the algorithm doesn't like me yet. Make sure to tell all your friends! 😄

@dtsh4451 9 ай бұрын

I flew C172S with G1000 NXi over seven hours in the last week and find this video is amazingly accurate and practical. It serves an excellent tutorial and memory aid for the AFCS. All pilots transition from six packs to glass should bookmark this videos. Much appreciated the great work👍, subscribed!

@AlphaHotelFlightSimulation 9 ай бұрын

Thanks for the feedback, @dtsh4451. Always good to hear from real life pilots that the sim is matching up with real world equipment. Working title has done an excellent job with this upgrade! Thanks for the kind words, as well. Glad you found the content helpful, and thanks for watching!

@TWOKDOK1 Жыл бұрын

This is by far the most professional, clearest and most comprehensive video I have seen on G1000 and I've watched a lot . BZ Sir

@AlphaHotelFlightSimulation Жыл бұрын

Thanks for the kind words, David. Glad you enjoyed the content, and thanks for watching!

@zdp-189 Жыл бұрын

I wish I saw this earlier instead of trudging and learning on my own over months- great work! As a minor aside, the count down timer does work again when you set a given time as of May 2023- not huge deal, butbif someone rather have countdown than up, you’re all good again😅

@AlphaHotelFlightSimulation Жыл бұрын

Glad you found the content helpful ZDP, and thanks for watching. The countdown timer was one of the (many) things Working Title fixed with the NXI upgrade (I made this video with the old stock system - though I do have differences training videos on that system.)

@RGflies63 Жыл бұрын

As a new flight simmer, I found this tutorial to be most helpful. Thanks for sharing your knowledge in a clear and concise manner. Please consider doing videos on other systems if possible.

@AlphaHotelFlightSimulation Жыл бұрын

Thanks for the kind words R G. I''m glad you're finding the content helpful. I try to publish new videos every two weeks or so, so make sure to ring the bell to be alerted to when new content comes out. Thanks for watching!

@formfaktor 6 ай бұрын

Brilliant. I used this as difference training before a check out on a c172S with the g1000. Can't thank you enough.

@AlphaHotelFlightSimulation 6 ай бұрын

Glad the content was helpful @formfaktor. Glad you checkout went well. Thanks for watching!

@richardkduncan3928 Жыл бұрын

As ALWAYS, another great video lesson. Thanks

@its-kemo 7 ай бұрын

Wow! So far all the videos I have seen have been top notch! I do wonder, why this gem has so little subscribers and popularity? Nonetheless, an excellent series, thank you very much for your time to make us simmers not go through pages and pages of G1000 manual.

@AlphaHotelFlightSimulation 6 ай бұрын

Thanks for the kind words @its-kemo. Glad you are enjoying the content and finding it helpful! Make sure to tell all of your friends! 😄

@melvinquebec 2 жыл бұрын

Just a slight correction (great work!!) : CRS2 knob works for VOR2. So all knobs work. Ciao! Keep it up! Very informative and greatest didactics I’ve seen on the subject.

@AlphaHotelFlightSimulation 2 жыл бұрын

Thanks Melvin. Appreciate the kind words, & good to know.

@BrysonSenevira Жыл бұрын

Very well done and very easy to listen to and understand. I fly X plane 12.3 and helicopters only just got the Robinson 66 and it came with the G1000 PFD and MFD its a bit of a challenge but using your instructions I have been able to make thing work thanks for sharing

@AlphaHotelFlightSimulation Жыл бұрын

Glad you've found the content helpful, Bryson. Thanks for the feedback, and thanks for watching!

@howardslade267 2 жыл бұрын

Excellent Video, I am learning alot from your videos. Thanks.

@AlphaHotelFlightSimulation 2 жыл бұрын

Glad you are finding the content helpful, Howard. Thanks for watching!

@gregorydayton5428 11 ай бұрын

Another great video. I always learn a lot. Thank You!

@AlphaHotelFlightSimulation 11 ай бұрын

Glad you enjoyed, @gregorydayton5428. Thanks again for watching!

@chrisgoddard1855 Жыл бұрын

Thanks - will watch this!

@olkansascowboy4893 2 жыл бұрын

Looking forward to your video on the NXI moded ver. Great videos, very informative. Thanks

@AlphaHotelFlightSimulation 2 жыл бұрын

Glad you're enjoying the content, Ol Kansas Cowboy. Thanks for watching!

@waynelcross Жыл бұрын

WOW… started watching your videos. Third one and i am hooked. Amazing work bro…. Keep it up

@AlphaHotelFlightSimulation Жыл бұрын

Thanks for the kind words, Wayne. Glad you're enjoying the content, and thanks for watching!

@garretthaynes8814 5 ай бұрын

You said KPBF, I almost flipped out of my chair. Home sweet home.

@AlphaHotelFlightSimulation 4 ай бұрын

@garretthaynes8814, I'm not actually from that area - but I was based near there as a CFI, and we flew in and out of there a lot. I based most of the primary VFR training videos there, as it is a good field for primary VFR flying - nice long north/south runway with good open terrain to the South/East for basic maneuvers, and at a reasonable elevation.

@itzsrayg5851 Жыл бұрын

Again amazing videos

@AlphaHotelFlightSimulation Жыл бұрын

Glad you enjoyed the content. Thanks for watching!

@billadams8795 Жыл бұрын

Great video. Thank you

@AlphaHotelFlightSimulation Жыл бұрын

Glad you enjoyed it billadams8. Thanks for watching!

@jakew9887 2 жыл бұрын

Excellent presentation. Thanks

@AlphaHotelFlightSimulation 2 жыл бұрын

Glad you enjoyed it, Jake. Thanks for watching!

@dhill2275 Жыл бұрын

Very good! Thanks

@JC-xr6dk Жыл бұрын

Amazing work.

@AlphaHotelFlightSimulation Жыл бұрын

Glad you're enjoying the content, J C. Thanks for watching!

@JohnnyGing Жыл бұрын

Just AWESOME!!

@AlphaHotelFlightSimulation Жыл бұрын

Glad you enjoyed it John. Thanks for watching!

@chrisgoddard1855 Жыл бұрын

Very clear thank you.

@AlphaHotelFlightSimulation Жыл бұрын

Glad you found the content helpful, Chris. Thanks for watching!

@PhilGeissler 9 ай бұрын

Awesome!

@AlphaHotelFlightSimulation 9 ай бұрын

Glad you enjoyed the content, @PhilGeissler. Thanks for watching!

@tomwallace753 9 ай бұрын

What else can I say? I loved it!

@AlphaHotelFlightSimulation 8 ай бұрын

@tomwallace753, glad you enjoyed the content. Thanks for watching!

@lpmac11 6 ай бұрын

Excellent teaching style and delivery. Well done! Are you cfi/i?

@AlphaHotelFlightSimulation 4 ай бұрын

Thanks for the kind words, @lpmac11. I am a CFI-I/MEI and AGI (and ATP.) I've kept my certs current, but I haven't done any active real-world instruction in quite some time. Glad you've enjoyed the content, and thanks for watching!

@MrStatsfreak Жыл бұрын

Great video, thanks. I'm having an issue with the altitude capture function and I'm wondering if someone here might offer a suggestion. I set my target altitude at say 3500ft and use either FLC or VS to get to the altitude, but once it gets within about 160 feet of the target the reading in the autopilot status line changes from ALTS armed to something like 3380 and the aircraft levels off at that altitude. Barometric pressure has been set properly, so I can't figure out why it changes the target altitude. Any tips or suggestions would be welcome.

@AlphaHotelFlightSimulation Жыл бұрын

Glad you enjoyed the video Ken, and thanks for watching. I tried to replicate your problem, but was unable to do so. Tried it using both live and custom weather, and both times (with a non-standard altimeter setting) the aircraft captured altitude and leveled off as expected. With, it's almost like the ALT button is being triggered somehow as you start to level. I know the 172 classic autopilot has problems with capturing a selected altitude with a non-standard altimeter setting, but I've not heard about a G1000 aircraft behaving that way. The only thing I can suggest is to try it with custom weather and a standard altimeter setting and see if it still does it. Also check to see if there is anything in your community folder that might be causing some sort of conflict.

@MrStatsfreak Жыл бұрын

@@AlphaHotelFlightSimulation Thanks for your reply and attempt to help with the problem. I did manage to find out what the problem was, and as you suspected it was a conflict with an older version of the GTN750 which I still had installed in my Community folder. Updated it and the issue was resolved. So again, thanks.

@AlphaHotelFlightSimulation Жыл бұрын

@@MrStatsfreak Glad you got everything working correctly. Happy flying!

@peejay1943 Жыл бұрын

So slick, so official. I yearn forr a voice talking slower and more chatty. Relax young man.

@Moonfaster Жыл бұрын

Do you have a tutorial of the G3X? I would love one since you are best on KZfaq

@AlphaHotelFlightSimulation Жыл бұрын

It's on the list, Moonfaster - I just don't know when I'll get to it. It's, unfortunately, the avionics suite that has been shown the least amount of love from the team, so it's still a very quirky system.

@Moonfaster Жыл бұрын

@Alpha-Hotel-FST No worries 👍

@Moonfaster Жыл бұрын

@Alpha-Hotel-FST By the way... a question. Random failures arent possible in msfs2020, right? You can only decide to activate them in a menu?

@AlphaHotelFlightSimulation Жыл бұрын

@@Moonfaster, you can create failures using that menu in MSFS - but they are mostly engine related failures, and the only random element you can set is time to failure. There is a mod for PC users that allows you to create truly random failures of most instruments or systems called Randfailures that I recommend looking into if you'd like to have that sort of feature. It's available here: flightsim.to/file/2272/randfailuresfs2020 I also have a video where I talk about how to use the failure menu, and how to use RandFailures (though it's an earlier version of the mod.) That's available here: kzfaq.info/get/bejne/b7-ghamhl8iYeZ8.html

@AlphaHotelFlightSimulation Жыл бұрын

Ooops - that video link only covers the failure menu. Here is the one that covers RandFailures: kzfaq.info/get/bejne/pNSafteAybXOlas.html

@mattalford3932 Жыл бұрын

Thats weird. I just let RNAV do its thing until im almost on the runway. Then i flar, and touch down like a pro lol. When it works. Roght now the G1000NXI isnt working right though lol.

@AlphaHotelFlightSimulation Жыл бұрын

Just like any computer system, it works great - until it doesn't! 😆 Thanks for watching!

@RedRuffinsore Жыл бұрын

I am having a strange problem with the G1000 in MSFS. I can use my mouse to click any of the buttons...or rotate any of the knobs. But I get no cursor, or have any ability to PUSH the knobs, which means (among other things) that I can't "select" anything. Has anyone else experienced this?

@AlphaHotelFlightSimulation Жыл бұрын

Unfortunately, I haven't encountered a problem like this. You might search on the official MSFS forum to see if anyone there has posted about it.

@lsemaldokhar4154 Жыл бұрын

Why am I flying in circles or off in some other random, not the right direction after I activated the approach? The autopilot flew the whole route and it shits the bed when it’s time to land

@AlphaHotelFlightSimulation Жыл бұрын

Double check the flight plan to make sure there are no duplicate fixes. This can happen sometimes when you load and arrival and then an approach. If there are duplicate fixes, you can delete the ones there are two of.